Assetto Corsa PC Mods General DiscussionPC

[racealot]

Abit of help please. skins arnet the same from creator and then in my content manager

Car - RSS MPH Protech P96

Skin Preview by creator
View attachment 1380069
Skin preview in my content manager
View attachment 1380070
Can clearly see the NUmber decals are different and that is like that for all the skins ive added to the P96

are you using CSP for final preview render? if not then I don't think that mod will show number plates properly in preview.

Where can i get this skin please for the RSS MPH Protech P96

Found the RSS version from their discord channel: https://www.patreon.com/posts/106457145

Had a quick view at this dilemma re: number-board not showing in CM previews... Within the livery-folder, replace the <EXT_HR2.dds> file with the attached (note: save original-file in any case).

 

[Masscot]

Automotodrom Brno extensive overhaul v2.0



Masaryk Circuit - Brno, Czech Republic https://www.automotodrombrno.cz/en/
Note: skins created for any pre-v2.0 versions may no longer work correctly.
Track originally ported from Race '07 (SimBin Studios) by Sneer/Malagoli.
V2.0 overhaul August 2024:

• Complete texture rework by ClimaxF1, including new trees
• Start line position corrected; start lights/clock/lap counter/session timer added; new billboard models added; new sponsors added; animated jumbotrons added.
• Camera-facing spectators and animated flag-waving spectators added.
• Marshals, TV vans, recovery trucks, camera cranes and cameramen added.
• Crowd and pitlane audio added.
• Physical road mesh and groove added; sausage kerbs and green runoffs added.
• Redundant treewalls removed; floating trees fixed; new trees planted.
• CSP animated flags added to pit buildings and grandstands.
• Animated helicopters, blimp, hot-air balloons, and distant airliners added.
• Night lighting and basic RainFX added.
• New AI line created; sections added; loading logo added.
• Various textures and shader values revised; various normals fixed; various new textures created; various models fixed.

Download brno circuit reworked

Download File brno circuit reworked

sharemods.com

Thanks to all contributors - this was a real team effort:
Sneer, Rafael Malagoli, Inori, Sliderman, Mascot, Shi, Pugsang, RMi, leBluem, macko68, Gunnar333, mteam, and ClimaxF1.

 

[kpcart]

The reason for all the small updates is simple. I don't want to force people to have to download the whole track\mod over and over again each time I find a problem or someone points out something that needs changed. I just release small updates with the files that have been updated. All of the updated files are then put into the full mod package and those get updated as well for future downloads or new users.

This is especially easier on the end user for a track like Spa\Spa 2022 which has so many addon extensions from Pyyer. I can't include his full extensions because they are paid mods. If I made everyone download the full track\mod over and over again, then each time I do a small update, they would have to install Pyyer's extensions over and over again.

Plus, all of my small updates are setup for easy installation for those that are not computer savvy. You just need to drag the content folder into the main 'assettocorsa' directory and overwrite when it asks.

i see the annoyance the person who questioned also. with modern internet, a 300mb file (mod with minor update) takes only a few seconds to download, but small updates, unzipping etc feel cumbersome and annoying, and then you forget which update you put or didn;t, and have to go back in your download folder and look backwards. RJ, your files are sorted into the correct way for installation, but so are most, even on overtake in 2024. i prefer seeing the version number of a mod in content manager, but small updates often dont have that, so then you cant remember if you updated with small update, install a new small update, and then sudently the track has errors...

 

[Elio92]

Had a quick view at this dilemma re: number-board not showing in CM previews... Within the livery-folder, replace the <EXT_HR2.dds> file with the attached (note: save original-file in any case).

View attachment 1380340

Hi !

Top of the pop, It works like a charm so thank you very much !

 

[GT3Masters97]

More RSS wip goodness. Funny URD posted a wip of this car too yesterday but not as complete lol.
View attachment 1380293

I hope I don't experience the Lexus trauma again 🙄

 

[Kidd333]

Thank you for a dream coming true! I'm a huge fan of Venturi (12Gb of photo&video materials excluding BPR series broadcast on other hdd) and all 1:43 Spark models!
Venturi was the only cars i missed in AC! Now i have all my beloved. And such a beautiful model and adaptation!
The handling is also great for my taste - a lil bit skittish though it draws a character for me, and even w/o proper settings for diff it handles much better than sesto



for my VR driver's eyes are better 0.387617,0.900732,-0.217655
Now i have to wait fro 400 Trophy which is the most underrated cup car

now all that's needed 1996 saleen tim alan speed lab gt2 mustang

 

[Xavithehobbit]

More RSS wip goodness. Funny URD posted a wip of this car too yesterday but not as complete lol.
View attachment 1380293

Could be and old photo.

 

[Cote Dazur]

@Masscot glad to see you back!

 

[andrevr]

Automotodrom Brno extensive overhaul v2.0

View attachment 1380342

Masaryk Circuit - Brno, Czech Republic https://www.automotodrombrno.cz/en/
Note: skins created for any pre-v2.0 versions may no longer work correctly.
Track originally ported from Race '07 (SimBin Studios) by Sneer/Malagoli.
V2.0 overhaul August 2024:

• Start line position corrected; start lights/clock/lap counter/session timer added; new billboard models added; new sponsors added; animated jumbotrons added.
• Camera-facing spectators and animated flag-waving spectators added.
• Marshals, TV vans, recovery trucks, camera cranes and cameramen added.
• Crowd and pitlane audio added.
• Physical road mesh and groove added; sausage kerbs and green runoffs added.
• Redundant treewalls removed; floating trees fixed; new trees planted.
• CSP animated flags added to pit buildings and grandstands.
• Animated helicopters, blimp, hot-air balloons, and distant airliners added.
• Night lighting and basic RainFX added.
• New AI line created; sections added; loading logo added.
• Various textures and shader values revised; various ClimaxF1 hi-res textures added; various normals fixed; various new textures created; various models fixed.

Download brno circuit reworked

Download File brno circuit reworked

sharemods.com

You came bearing gifts. Welcome back

 

[Masscot]

Finally released, it is available on overtake.
Thanks for your support!

What an amazing little car. Great stuff, @rnoir. Thanks!
The very small driver looked quite odd in VR so I swapped in a full-size one for you to test if you want to, which also needed a new shift animation. I also fixed the hand/wheel synch and adjusted the shift preload and timing.
He sits lower in the seat so the current harness isn't a great fit, I'm afraid. Looks much better in VR though, with his feet now reaching the pedals.
Somebody mentioned the LODs, so I redid those too if you're interested.
The internal door panels were reflecting the road so I moved those to cockpit_HR in the config.
Attached is not the complete car, it's ONLY the new steer.ksanim, new shift.ksanim, new driver3d.ini, new lods.ini, new lods B, C and D kn5s, and your ext_config.ini with the addition for the internal door panels. So backup first, and add the files manually, overwriting when asked.
Feel free to use any of it if you want, or ignore it completely.
Anyway, hope this helps, and thanks again for such a wonderful little beast.

Edit: ignore the config, I thought it stopped the door panel reflections but apparently not.

WeTransfer | Send Large Files Fast

The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.

we.tl

 

[Fall Guy]

Automotodrom Brno extensive overhaul v2.0

View attachment 1380342

Masaryk Circuit - Brno, Czech Republic https://www.automotodrombrno.cz/en/
Note: skins created for any pre-v2.0 versions may no longer work correctly.
Track originally ported from Race '07 (SimBin Studios) by Sneer/Malagoli.
V2.0 overhaul August 2024:

• Start line position corrected; start lights/clock/lap counter/session timer added; new billboard models added; new sponsors added; animated jumbotrons added.
• Camera-facing spectators and animated flag-waving spectators added.
• Marshals, TV vans, recovery trucks, camera cranes and cameramen added.
• Crowd and pitlane audio added.
• Physical road mesh and groove added; sausage kerbs and green runoffs added.
• Redundant treewalls removed; floating trees fixed; new trees planted.
• CSP animated flags added to pit buildings and grandstands.
• Animated helicopters, blimp, hot-air balloons, and distant airliners added.
• Night lighting and basic RainFX added.
• New AI line created; sections added; loading logo added.
• Various textures and shader values revised; various ClimaxF1 hi-res textures added; various normals fixed; various new textures created; various models fixed.

Download brno circuit reworked

Download File brno circuit reworked

sharemods.com

Welcome back and thanks for this re-work Masscot!

 

[Masscot]

Welcome back and thanks for this re-work Masscot!

Thanks - it was a big team effort. Check the UI and config for my fellow contributors.
Actually, I'll add them to the original post for clarity.

 

[Fall Guy]

Thanks - it was a big team effort. Check the UI and config for my fellow contributors.
Actually, I'll add them to the original post for clarity.

RT 2.0? Btw there is some issue with cars floating over the track and don´t touch the ground quite properly. Not on every sector but on few.

 

[Aaron Green]

Does anyone have the original Monza track by Kunos, I nerfed my track and it looks weird now. 3D trees was a mistake.

 

[ninezeroniner]

Turns out my laps count was messed up on Oulton so I thought the Nuzzi Pit Strategy app was malfunctioning.

 

[Fanapryde]

.../... 3D trees was a mistake.

Always is...

 

[wolf4263]

i see the annoyance the person who questioned also. with modern internet, a 300mb file (mod with minor update) takes only a few seconds to download, but small updates, unzipping etc feel cumbersome and annoying, and then you forget which update you put or didn;t, and have to go back in your download folder and look backwards. RJ, your files are sorted into the correct way for installation, but so are most, even on overtake in 2024. i prefer seeing the version number of a mod in content manager, but small updates often dont have that, so then you cant remember if you updated with small update, install a new small update, and then sudently the track has errors...

This is why I always add a README file to car/track folders of any small updates and added content/extension's and their URL.

 

[MrHunt]

@Masscot welcome back mate, i thought we lost you.

 

[rnoir]

What an amazing little car. Great stuff, @rnoir. Thanks!
The very small driver looked quite odd in VR so I swapped in a full-size one for you to test if you want to, which also needed a new shift animation. I also fixed the hand/wheel synch and adjusted the shift preload and timing.
He sits lower in the seat so the current harness isn't a great fit, I'm afraid. Looks much better in VR though, with his feet now reaching the pedals.
Somebody mentioned the LODs, so I redid those too if you're interested.
The internal door panels were reflecting the road so I moved those to cockpit_HR in the config.
Attached is not the complete car, it's ONLY the new steer.ksanim, new shift.ksanim, new driver3d.ini, new lods.ini, new lods B, C and D kn5s, and your ext_config.ini with the addition for the internal door panels. So backup first, and add the files manually, overwriting when asked.
Feel free to use any of it if you want, or ignore it completely.
Anyway, hope this helps, and thanks again for such a wonderful little beast.

Edit: ignore the config, I thought it stopped the door panel reflections but apparently not.

WeTransfer | Send Large Files Fast

The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.

we.tl

Thank you Masscot!
I am very interested in the new driver, I will test it when I have access to my wheel again.
I have already made new LODS in anticipation of a future update. I also fixed the reflection problem with the internal parts of the doors, it seems to work.
Thanks for your work!

 

[Rainmaker87]

UPDATE AHVENISTO 60s

v2.2
-added collision for corner tires
-optimized time gate

Ahvenisto 60s v2.2 by Sergio Loro and Rainmaker

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[Bob Jackson]

guys i need some help.

just received a psvr2 PC PC adapter, but it looks less than crap compared to hpreverb g1 on assetto corsa, any tips?

using a 4080, 12th gen CPU i7, 32 gb ram, most yt videos are with 4090.

 

[Fall Guy]

Does anyone have the original Monza track by Kunos, I nerfed my track and it looks weird now. 3D trees was a mistake.

Just delete the extension folder and download the track config again via CM. Don´t make it so complicate and ask for official Kunos content again and again here.

 

[1ChazDM1]

Had a quick view at this dilemma re: number-board not showing in CM previews... Within the livery-folder, replace the <EXT_HR2.dds> file with the attached (note: save original-file in any case).

View attachment 1380340

Thank you that worked 👍

 

[24H]

Automotodrom Brno extensive overhaul v2.0

View attachment 1380342

Masaryk Circuit - Brno, Czech Republic https://www.automotodrombrno.cz/en/
Note: skins created for any pre-v2.0 versions may no longer work correctly.
Track originally ported from Race '07 (SimBin Studios) by Sneer/Malagoli.
V2.0 overhaul August 2024:

• Start line position corrected; start lights/clock/lap counter/session timer added; new billboard models added; new sponsors added; animated jumbotrons added.
• Camera-facing spectators and animated flag-waving spectators added.
• Marshals, TV vans, recovery trucks, camera cranes and cameramen added.
• Crowd and pitlane audio added.
• Physical road mesh and groove added; sausage kerbs and green runoffs added.
• Redundant treewalls removed; floating trees fixed; new trees planted.
• CSP animated flags added to pit buildings and grandstands.
• Animated helicopters, blimp, hot-air balloons, and distant airliners added.
• Night lighting and basic RainFX added.
• New AI line created; sections added; loading logo added.
• Various textures and shader values revised; various ClimaxF1 hi-res textures added; various normals fixed; various new textures created; various models fixed.

Download brno circuit reworked

Download File brno circuit reworked

sharemods.com

Thanks to all contributors - this was a real team effort:
Sneer, Rafael Malagoli, Inori, Sliderman, Mascot, Shi, Pugsang, RMi, leBluem, macko68, Gunnar333, & mteam.

thanks a lot mate! much appreciated for a much underrated track imo

 

[1ChazDM1]

Had a quick view at this dilemma re: number-board not showing in CM previews... Within the livery-folder, replace the <EXT_HR2.dds> file with the attached (note: save original-file in any case).

View attachment 1380340

Ok so I have this problem with most the skins I have for the car, how can I create the file myself?

 

[Cote Dazur]

guys i need some help.

just received a psvr2 PC PC adapter, but it looks less than crap compared to hpreverb g1 on assetto corsa, any tips?

using a 4080, 12th gen CPU i7, 32 gb ram, most yt videos are with 4090.

Assetto Corsa in VR

I'm thinking on quest2 for AC good or bad idea? anyone have that combo for AC rv? BTW my specs ryzen 5 3600, rtx2060, 16gb ram

www.gtplanet.net

 

[Perico Lospa]

... 3D trees was a mistake.

By the way, I join in the congratulations for the return of Masscot...

 

[Masscot]

RT 2.0? Btw there is some issue with cars floating over the track and don´t touch the ground quite properly. Not on every sector but on few.

Not RTv2 as such, more like Band Aid circa 1984 but with worse dress sense and less cocaine. I won't make the obvious joke... I've only been back for five minutes and my smacked botty is still sore.
Thanks for the report re the levitating cars. Not sure how we missed that. A lot of work was done in not only creating a physical mesh with good feedback, but also making sure it synchronised with the visual road. Something's obviously gone squiffy somewhere.
This area obviously needs attention, but you mentioned some others?

 

[ninezeroniner]

Since we're talking Usual Suspects and recent 2.0 tracks...acu Miami Bayside always had this weird double thing here and it's still there.

Flying bit.

Flying higher bit.

Anyone knows how to tweak Nuzzi Yellow Flag app values'?
LUA debug app and then?

 

[Aaron Green]

Just delete the extension folder and download the track config again via CM. Don´t make it so complicate and ask for official Kunos content again and again here.

Well obviously I didn't know you could do that.