Assetto Corsa PC Mods General DiscussionPC

[MS6Driver]

WIP: 1994 DTM Skinpack for the TJ C180

 

[FeGabriel]

This was my first racing sim (really)
View attachment 1409258

belt or DD ? how much nm ?

 

[PGMurphy]

Thank you very much sir! @spagna it´s the Z06 track by Peter Crill (101creative)

View attachment 1408387

View attachment 1408386

I quite liked the idea of this fix, but I noticed that the banner is still visible from the inside. Is there a fix for this as well? Sorry if I missed a previous post that addressed this.

 

[MasterFocus]

Soon...
View attachment 1409271

 

[FrustratedUse]

Lol what a joke

These big studios were once doing stuff the others weren't but nowadays they all seem to do the same frigging thing. Jesus...

How about some Group C 3.5L car ? Trans-Am from the 80s (like T10 bringing the Beretta, Cutlass or Regal to FM2023) ? A proper late 90s NASCAR ? No, better bring the same thing as RSS.

I'm tired

As much as i want VRC to do other stuff than boring open wheel cars(in my humble opinion they are some of the most boring cars to drive) i'm guessing they do it cause it brings in money.

I'd love for them to finish off their super touring pack and give us an proper E36, S40, Primera's etc but maybe the monetary gain isn't enough to justify modeling them and making physics etc

 

[xavier_piers]

As much as i want VRC to do other stuff than boring open wheel cars(in my humble opinion they are some of the most boring cars to drive) i'm guessing they do it cause it brings in money.

I'd love for them to finish off their super touring pack and give us an proper E36, S40, Primera's etc but maybe the monetary gain isn't enough to justify modeling them and making physics etc

You are probably going to get these mods sooner from f302 and such modders here, than from VRC lol.

 

[RFO2002]

Good morning everyone!!
Would anyone be kind to help me?
Lately I don't understand why with the VRC "Touring Cars" I notice the FFB with my G29 too strong. I can't adjust it properly. This didn't happen with the first versions. I use the CSP version.
If I lower the force too much, the steering wheel has no resistance in turns.
A thousand thanks!!

Hello , I have this problem with t300 rs wheel can anyone had the same problem?

 

[xavier_piers]

Lol what a joke

These big studios were once doing stuff the others weren't but nowadays they all seem to do the same frigging thing. Jesus...

How about some Group C 3.5L car ? Trans-Am from the 80s (like T10 bringing the Beretta, Cutlass or Regal to FM2023) ? A proper late 90s NASCAR ? No, better bring the same thing as RSS.

I'm tired

YES!!! AC is in desperate need of such mods. You have some good mods of mentioned classes, but nowhere is it like a pack of great quality cars like RSS GT pack, GTM, GTN, VRC touring car/prototypes pack etc. I don't want to diss anyone, who am I to say anything, but the pack we have like group C pack from GTSupreme, or the Trans-Am from Bazza are all great grid fillers, none of which are the same quality as like kunos 787B for example, or let's say VRC Trans-Am Chevrette.

 

[StoffelWaffle]

As much as i want VRC to do other stuff than boring open wheel cars(in my humble opinion they are some of the most boring cars to drive) i'm guessing they do it cause it brings in money.

I'd love for them to finish off their super touring pack and give us an proper E36, S40, Primera's etc but maybe the monetary gain isn't enough to justify modeling them and making physics etc

Oh it'd sell like hotcakes, I mean look at the reaction after Raceroom announced their STW pack. Lotsa enthusiastic people !

 

[Fumblefap]

Yes, modern formula cars leave me completely flaccid. Even classic formula cars are a semi, at best.

I absolutely adore the touring cars that VRC put out. Personally, I'd really like to see mid-90s JGTC. Some pretty legendary cars there.

 

[FrustratedUse]

You are probably going to get these mods sooner from f302 and such modders here, than from VRC lol.

Probably, So i'll rather wait for them to stop slobbing on open wheel cars until then.

 

[Ale2Passos]

Hello , I have this problem with t300 rs wheel can anyone had the same problem?

I set up my wheel with this guide and it turned out great, maybe it will help you.

Sim Racing

Programming and Tech Tips

www.briankoponen.com

 

[maximeerkat]

This was my first racing sim (really)
View attachment 1409258

what year's were these around? i swear i had something along these lines as a really young child like 3 or 4 this would of been the late 80's............

 

[RMi_wood]

what year's were these around? i swear i had something along these lines as a really young child like 3 or 4 this would of been the late 80's............

late 70s, you are a decade off

 

[Apocalypse211]

Okay the 2005/2007 leaderboard is finished and ready to share. I made a small update video of my 2005/2007 Season project at the same time.

Personally I think this leaderboard suits pretty good. There's still a bug (that was in the original 2022 Leaderboard that I used as a base) in driver comparison. It doesn't pick up the correct driver from the grid and shows the gap to wrong drive namer. I can easily fix that when I have more time.

I made quite a few changes. Driver surnames completely visible now, removed all wrong teamnames (as the 2005 and 2007 VRC grid is skin based with only 2 base cars) and I changed the colors to match the colors that were used in 2005 and 2007. The vertical leaderboard with 100% genuine display is possible to do but I think it would limit the visibility of the cockpit mode quite a bit. I might do that later but meanwhile you can enjoy this.I used all colors and Frutger font that was used in 2005 and 2007. Font is inside the leaderboard package.

New leaderboard for F1 2005 and 2007 seasons

There was not any kind of leaderboard for this era of F1 done for AC. This is designed for standard 1920 x 1080 resolution. It works on higher resolutions too but it appears smaller. Driver surnames completely visible. I used the colors to...

www.overtake.gg

 

[RicME85]

Done some good work there dude 👍

 

[oigolue]

Yes, modern formula cars leave me completely flaccid. Even classic formula cars are a semi, at best.

I absolutely adore the touring cars that VRC put out. Personally, I'd really like to see mid-90s JGTC. Some pretty legendary cars there.

Yes, more touring cars and japanese gts is what the people want! I'm glad people like fuzo and natsuki exist. Natsuki is working already on the z gt500 '24 spec

 

[sDmD13]

WIP: 1994 DTM Skinpack for the TJ C180View attachment 1409355View attachment 1409356View attachment 1409357

tj c180? why not use jks?

 

[MS6Driver]

tj c180? why not use jks?

Because the air inlets on the rear fender

 

[jac0]

I made a skin for the Mazda RX7 FB Race "ed. deCarrera v1.1" found in the garage (here)

not only a chameleon exterior this time , but also an improved interior (dabling w upscaling etc. at least it's improved imho)

original

my interior

DOWNLOAD

tip : take this monster on a hillclimb on Pico Veleta Subida by Genis Valls , you will not regret it!


EDIT : a question, does anyone know how to solve the RPM needle issue?

from approx 2 to 5.5 K rpm the needle seems to be behind something (partially going out of view)

 

[chas1723]

Lol what a joke

These big studios were once doing stuff the others weren't but nowadays they all seem to do the same frigging thing. Jesus...

How about some Group C 3.5L car ? Trans-Am from the 80s (like T10 bringing the Beretta, Cutlass or Regal to FM2023) ? A proper late 90s NASCAR ? No, better bring the same thing as RSS.

I'm tired

RSS has at least 2 Group C in the works

 

[Jezza819]

what year's were these around? i swear i had something along these lines as a really young child like 3 or 4 this would of been the late 80's............

late 70s, you are a decade off

I had this game too. We moved from the house I grew up in in 1978 when I was 13 and I think I got this game somewhere around that time.

 

[MasterFocus]

I made a skin for the Mazda RX7 FB Race "ed. deCarrera v1.1" found in the garage (here)

not only a chameleon exterior this time , but also an improved interior (dabling w upscaling etc. at least it's improved imho)

View attachment 1409435
original
View attachment 1409438
my interior
View attachment 1409437

DOWNLOAD

tip : take this monster on a hillclimb on Pico Veleta Subida by Genis Valls , you will not regret it!


EDIT : a question, does anyone know how to solve the RPM needle issue?

View attachment 1409442 View attachment 1409443
from approx 2 to 5.5 K rpm the needle seems to be behind something (partially going out of view)

Positioning must be off a little, would need to be adjusted thru 3D editor

 

[jac0]

Positioning must be off a little, would need to be adjusted thru 3D editor

hmmm ... that's beyond my capabilities ATM .... can someone else give it a go please?

I give this beast in return :

(modified Ferrari 288 GTO Hellspec by D1ablO )

DOWNLOAD

 

[c0neofsilence]

RSS has at least 2 Group C in the works

I like to see some more Canam cars

 

[Apocalypse211]

Keke Rosberg said that when he quit F1 and went to DTM It felt like driving a taxi cab with zero traction.

I played ACC yesterday right after testing the modern VRC F1 cars.

I felt the same way and boy it took me a while to find the old touch again. However I've never been a good ACC player. I can clock 1:57 at Nurburgring in a good day and the guys online do that 20 laps in a row.

That being said, ACC is an amazing game and I love it.

 

[Warwolf156]

Hey Guys,

Seeing someone making skins for the C180 made me think, is there any good C180 without Kunos 155TI sounds and physics on it?

 

[PGMurphy]

I made a skin for the Mazda RX7 FB Race "ed. deCarrera v1.1" found in the garage (here)

not only a chameleon exterior this time , but also an improved interior (dabling w upscaling etc. at least it's improved imho)

View attachment 1409435
original
View attachment 1409438
my interior
View attachment 1409437

DOWNLOAD

tip : take this monster on a hillclimb on Pico Veleta Subida by Genis Valls , you will not regret it!


EDIT : a question, does anyone know how to solve the RPM needle issue?

View attachment 1409442 View attachment 1409443
from approx 2 to 5.5 K rpm the needle seems to be behind something (partially going out of view)

Thank you for dressing up one of my all time faves...

 

[racinjoe013]

Anyone know anything about a T300RS wheel and what happens when it overheats or is possibly broken? Mine started to act weird this evening out of the blue and i'm wondering if it's broken. I'm thinking it's overheating (although I hear the fan blowing) because if I stop for a little bit, it's fine again for about 2-3 laps and then starts to act weird again.

 

[RMi_wood]

Anyone know anything about a T300RS wheel and what happens when it overheats or is possibly broken? Mine started to act weird this evening out of the blue and i'm wondering if it's broken. I'm thinking it's overheating (although I hear the fan blowing) because if I stop for a little bit, it's fine again for about 2-3 laps and then starts to act weird again.

Sounds like the positioner could be whack

found this searching "T300RS repair" in Google

T300 Repair

I naively bought a used, broken T300 wheel to try and repair it as a companion to my T500RS. As I don't have a T300 wheel I just fitted the T500 wheel for the moment assuming they're the same. Most of what I experience applies when the wheel is removed: What's working: Wheel powers on when...

www.gtplanet.net