Assetto Corsa PC Mods General DiscussionPC

[Triplexbee]

Excuse my ignorance, but I thought it was all about this grid pattern (fly screen like microgrid):
Picture courtesy @Fall Guy

View attachment 1427746

which seems to be something totally different from what you are showing (a smudged, dirty windscreen)...right ?

Everyone who is suffering this running CMRT? If so try disabling it. Looks a lot like the transparency they use on their apps.

 

[Den_88]

It's strange why they decided to use this solution:

[SHADER_REPLACEMENT_...]
ACTIVE = 1
MESHES = WINDOWS_INT2
CAST_SHADOWS = 0

because the letters on the glass do not cast a shadow.after all, you can add just a little bit

[SHADER_REPLACEMENT_...]
ACTIVE = 1
MESHES = WINDOWS_INT2
CAST_SHADOWS = 1
PROP_... = ksAlphaRef,0.4

and the shadow will appear as it should.
UPD.In general, this could have been done at the assembly stage in the ksEditor

 

[marc magnela]

I had a look with gimp, there is still some dirt in the original image if you mask the layer, I replaced it with a solid white color instead to make a test, if someone who has an AMD card can try this image in the 1995_PROCAR_2 skin with ACTK v1.0.5

Download

A file is available for download and streaming via UploadNow by following this link

uploadnow.io

 

[marc magnela]

Everyone who is suffering this running CMRT? If so try disabling it. Looks a lot like the transparency they use on their apps.

I use CMRT and I don't have this problem with the audi, but I only use some CMRT gearbox app, damage, tyres
and where do you see this grid in CMRT?

 

[pugsang]

I honestly do not know why you keep editing files in gimp since there is a fixed version over here.

Assetto Corsa PC Mods General Discussion

How nice would it be to have them in AC?

www.gtplanet.net

Without the net and the internal carbon cockpit coming out of the window.

Is it to hard to admit that there are problems at the original model? I have found 2 windshield meshes overlapping ( apart from the obvious and needed ones), 3 meshes for the net, 2 meshes for the internal carbon, 2 meshes for the internal plastics etc

After more investigation there seem to be more overlapping meshes especially at the roll cage (3 actually).

I have fixed them also for myself. Keep editing files in gimp

 

[Masscot]

I decided to open the A4 in Blender and fix its 3d inconsistencies. Please try this version as I have zero problems with windows and parts sticking out of them

I DO NOT CLAIM THE CAR AS MINE

f302_audi_a4q_stw - V1002024

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Have sent you a PM on Discord.

 

[Gabriele]

Where can I contact David Nuzzi? I would like to propose an app idea for Assetto Corsa

 

[Fanapryde]

Where can I contact David Nuzzi? I would like to propose an app idea for Assetto Corsa

This might be worth a try: https://www.overtake.gg/members/nuzzi.944945/

 

[marc magnela]

Without the net and the internal carbon cockpit coming out of the window.

Is it to hard to admit that there are problems at the original model? I have found 2 windshield meshes overlapping ( apart from the obvious and needed ones), 3 meshes for the net, 2 meshes for the internal carbon, 2 meshes for the internal plastics etc

After more investigation there seem to be more overlapping meshes especially at the roll cage (3 actually).

I have fixed them also for myself. Keep editing files in gimp

it's normal for there to be duplicates, there are duplicates for COCKPIT_HR and COCKPIT_LR, and your method with kspixel and blend is not the right way to do it, the problem comes from elsewhere and probably only with AMD cards.
in addition, you have made the outside windows non-transparent
you've repaired the carbon but broken the object's smoothness

COCKPIT_LR broken

 

[RMi_wood]

this whole Audi thing should be a seperate thread.

 

[24H]

this whole Audi thing should be a seperate thread.

cant wait for the other RR supertourers

 

[Mike173]

hi gents,
the more i learn the less i know
tons of things about geometry:

https://www.suspensiondesigner.com/design-with-race/suspension-key-performance-indicators-kpi/
https://suspensionsecrets.co.uk/
https://race.software/
good reading,
Mike

 

[Fall Guy]

cant wait for the other RR supertourers

I don´t know but I suppose there won´t be any further being released here...

I decided to open the A4 in Blender and fix its 3d inconsistencies. Please try this version as I have zero problems with windows and parts sticking out of them

I DO NOT CLAIM THE CAR AS MINE

f302_audi_a4q_stw - V1002024

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Aaand here we go, no more pattern windscreen! Thinking about the Audi makes me think about

 

[marc magnela]

this whole Audi thing should be a seperate thread.

creating separate treads could be dangerous

 

[FrustratedUse]

this whole Audi thing should be a seperate thread.

This whole thing is going to start all over when the E36 comes out, Then the Accord...and the S40.... the 850... then again when R3E finalizes their Alfa 155...

Might as well at this point lol

 

[Jezza819]

Drag and drop from the 7zip screen into the tracks folder.
View attachment 1427825

I tried to take the entire file into the tracks folder and this is what I got.

 

[Mike173]

Hi gents, new base mod for the Delta Evo Fornage from almen

DOWNLOAD:
https://www.mediafire.com/file/87udetansygdtw8/alm_delta_92_fornage.7z/file

Have fun,
Mike

 

[Perico Lospa]

... if someone who has an AMD card can try this image in the 1995_PROCAR_2 skin with ACTK v1.0.5...

AMD here, and yes, your WINDOWS_INT.dds seems to work erasing the mosquito net, without overlapping stickers/windshield frame...

... there is a fixed version over here...

With that version there's no net, nor internal carbon protruding, yes... but what says marc magnela is true; looking from the outside and as you move away, somethings inside start to disappear...

(DEEP PHILOSOPHICAL THOUGHT OF THE DAY: Of course, if instead of ending up with the Audi destroyed in a huge fireball of anger and fights, were possible to complete it satisfactorily by working together, it would be a milestone for Mankind and would restore my hope for a better future. Seriously. 🤔)

 

[pugsang]

it's normal for there to be duplicates, there are duplicates for COCKPIT_HR and COCKPIT_LR, and your method with kspixel and blend is not the right way to do it, the problem comes from elsewhere and probably only with AMD cards.
in addition, you have made the outside windows non-transparent
you've repaired the carbon but broken the object's smoothness


View attachment 1427887

View attachment 1427885

COCKPIT_LR broken

I suppose this is the correct angle of a driving sim

 

[marc magnela]

I suppose this is the correct angle of a driving sim

you supposed bad, it's sure that watching a replay with lots of cars, where the interior is missing it looks clean

 

[shi]

I tried to take the entire file into the tracks folder and this is what I got.

You need to understand the folder structure of AC

Spoiler: No need to look

I am sick and tired of questions about problems installing mods, false positives being detected when downloading mods, etc.

This is because it has nothing to do with the quality of the mod.
It lowers my motivation to work on it.

 

[Fanapryde]

I tried to take the entire file into the tracks folder and this is what I got.

All files are in the download:

And after unpacking this:

Into ...(drive) > Steamlibrary > steamapps > common > assettocorsa > content > tracks, you should see this:

I have no idea how you manage to run into this issue, but I can assure you, it's not @shi files.

 

[Jezza819]

All files are in the download:
View attachment 1427915

And after unpacking this:

View attachment 1427916

Into ...(drive) > Steamlibrary > steamapps > common > assettocorsa > content > tracks, you should see this:

View attachment 1427917

I have no idea how you manage to run into this issue, but I can assure you, it's not @shi files.

When I download the file I see this.

Double click on that folder and I see this

Double click that and I see this

Which of these 3 screens are you saying that are supposed to be dropped into tracks? And @shi yes I have watched that video before thank you.

 

[I_R_Brainiac]

I see now why I have no freinds...

 

[The Vampire]

View attachment 1427932

Which of these 3 screens are you saying that are supposed to be dropped into tracks?

The second screen.

 

[OooAhh Cantona]

So don't open it up and install the "jerez_1994" file, just try and put the whole folder into tracks?

Yes.

When I download the file I see this.

View attachment 1427931

Double click on that folder and I see this

View attachment 1427932

Double click that and I see this

View attachment 1427933

Which of these 3 screens are you saying that are supposed to be dropped into tracks? And @shi yes I have watched that video before thank you.

The 2nd screen. Just put the entire nurburgring_1984 folder into the assettocorsa>content>tracks folder.

 

[Perico Lospa]

 

[Triplexbee]

I use CMRT and I don't have this problem with the audi, but I only use some CMRT gearbox app, damage, tyres
and where do you see this grid in CMRT?

Yeah, it was a proper long shot. I don't have the car in question so couldn't check for myself.

Most of the CMRT applets have this pattern but if you open the Radar, the virtual car is carried on a semi transparent layer that looks like the offender on the Audi windscreen.

I repeat it was a long shot but the grid looked similar and I thought I would 'chuck it in the pot'.

 

[Alis_70]

Honestly, you (everyone complaining about f302 Audi) should switch to the Cyril Cheddy Audi.
I know it's not exactly the same, and some parts aren't as well detailed as Raceroom model, but imho there is less issues than F302 mods (I have only change some basic things in ext_config) and I think interior is better ...

And I think his Audi is the best mod from Cyril Cherry.

 

[m3gt2]

This is what I got when I tried to install his Jerez update.

this happens when ssd or hdd fail. likely the files got corrupted after copying into bad sectors. check your drive