- 1,050

- United Kingdom
Just put this file to write-only and you´re safe in case of overwriting it through CSP updates. Thanks for the hint, though! Appreciated.RE the trees adjustments, very similar can be achieved by a shader replacement in assettocorsa\extension\config\tracks\generic\generic.ini.
something like..
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = shader:ksTree
PROP_0 = ksAmbient, 0.15
PROP_1 = ksDiffuse, 0.045
PROP_2 = ksSpecular, 0.02
Obviously wont look right for every track, but is basically doing same as app, but once when track loads instead of constantly and without trying to recreate ksTree behaviour in another shader.
This one is also nice if you have enough headroom:
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = ?
FILL_MISSING_TEXTURES = 1
CAST_SHADOWS = 1
DISTANT_SHADOWS = TERRAIN
Any changes in this file get overwritten on CSP upgrade / version change so back-up / remember them if you like how it looks!
Falling leaves doesn't work for me in the app anyway, so nothing to say about that..
Well, would be nice to get Corvette DP Car from 2016...we only have awful FM6 conversion by ScamdreamHi.
Something in the works. Hint: it may be interesting for IMSA fans.View attachment 1551932
Actually kinda neat, Bill Auberlen is clutch-less shifting the H-pattern car doing demo ride.....
I'm not sure if it's a guess or not. Anyway it's close but not that car. Btw car You mention is long time made by IER and even have some modern patches. Have a look here.Well, would be nice to get Corvette DP Car from 2016...we only have awful FM6 conversion by Scamdream
Hi, do you have any links for these modernization patches for USCC that you mentioned?I'm not sure if it's a guess or not. Anyway it's close but not that car. Btw car You mention is long time made by IER and even have some modern patches. Have a look here.
View attachment 1551962
Hi. Im not able to find it now (probably was deleted from OT). But i found this:Hi, do you have any links for these modernization patches for USCC that you mentioned?
I'm running the stock USCC mod (1.22) and they are a bit outdated. Particularly the Oreca, which I use in my league every now and then. It's dated visually, and it's not easy to drive by any stretch, but it's perhaps the best free-to-download LMP option out there.
ah, yeah, the ones through CSP I'm aware of. The Oreca one is actually pretty terrible, it breaks mirrors and LODs if I recall correctly.Hi. Im not able to find it now (probably was deleted from OT). But i found this:
![]()
acc-extension-config/config/cars/mods/ier/corvette_dp_d.ini at master · ac-custom-shaders-patch/acc-extension-config
Configuration files for Assetto Corsa Custom Shaders Patch - ac-custom-shaders-patch/acc-extension-configgithub.com
Hope this helps, if You already did not have this update.![]()
acc-extension-config/config/cars/mods/ier/oreca_flm09.ini at master · ac-custom-shaders-patch/acc-extension-config
Configuration files for Assetto Corsa Custom Shaders Patch - ac-custom-shaders-patch/acc-extension-configgithub.com
I was just about to start this skin so you have saved me a whole day of work, only thing i seen as wrong is the tyre side walls they had the small red yokohama i put the wrong ones on mine aswellBMW M3 E46 GTR - ALMS PTG #10
And here's the Team car livery...
View attachment 1551937
View attachment 1551936
BMW M3 E46 GTR - ALMS PTG #6
Few decal & paint updates (skin-only).
View attachment 1551939
DOWNLOAD
Happy racing!
Are you able to convert your skins to the ACF version as well? Better 3D model...I was just about to start this skin so you have saved me a whole day of work, only thing i seen as wrong is the tyre side walls they had the small red yokohama i put the wrong ones on mine aswell
thankyou very much for this, there done really rather nicely
if anyone cares just take the 3 tyre side wall files from my number 6 or 10 and add them to racealot skins, that will give you the correct tyre side walls (after you download my update)
small update for my number 6 and 10 skins
picture for tyre side wall reference (only 1 i could find)
I tried to find who uploaded this years ago but i cannot find the OG upload so i will post it up here: this is a ready made tyre sidewall pack. It has helped me out alot over the skins i have done maybe it can make someone else's life easier..........whoever put this together years ago i salute you.
![]()
25.45 MB file on MEGA
mega.nz
View attachment 1552049
I have a difference of opinion, i just downloaded the ACF version to double double check and to me the ACF version looks no where near as good as F302........Are you able to convert your skins to the ACF version as well? Better 3D model...
I actually have never thought this car had sequential transmission, at least never the factory 4 liter V8 M3 GTR. There were many "M3 GTR" that were not built by BMW, with V8 or I6, I think the Grand AM cars with the 5 liter V8 from the E39 M5 base were also still normal manuals. I've certainly seen videos of E46 M3 bodied GT cars that had sequential but I am not sure if those were ever BMW built cars.Back to the subject of the BMW M3 GTR ALMS... The imaginative excuse I’d cooked up to justify to my wife buying a BDH shifter (my dear, it’s necessary to feel the thud of the BMW’s sequential gear shift) is starting to fall apart. Out of curiosity, I’ve been looking for more information, and contrary to what I thought and just as some of you are saying, seems that the manual transmission was the option most commonly used in that car.
Attaching an interesting and comprehensive document.
![]()
No cross-over liveries thus far, so all good for now... Maybe it was meant to be - great minds think alike... or just pure luck!I was just about to start this skin so you have saved me a whole day of work, only thing i seen as wrong is the tyre side walls they had the small red yokohama i put the wrong ones on mine aswell
thankyou very much for this, there done really rather nicely
if anyone cares just take the 3 tyre side wall files from my number 6 or 10 and add them to racealot skins, that will give you the correct tyre side walls (after you download my update)
small update for my number 6 and 10 skins
picture for tyre side wall reference (only 1 i could find)
I tried to find who uploaded this years ago but i cannot find the OG upload so i will post it up here: this is a ready made tyre sidewall pack. It has helped me out alot over the skins i have done maybe it can make someone else's life easier..........whoever put this together years ago i salute you.
![]()
25.45 MB file on MEGA
mega.nz
View attachment 1552049
Thank you Raul same to you keep up the work, i know exactly what you mean when it come to finding that 1 sticker that you can't find made even worse when you know what it is but you cannot remember exactly what it is.No cross-over liveries thus far, so all good for now... Maybe it was meant to be - great minds think alike... or just pure luck!
Appreciate the offer to use your tyres - thank you.
Your liveries rock! Keep up the great work you're delivering.
Will be releasing a final update in due time, now that I've found a highres decal - which was driving me a bit nutty, cause I could not make out what it was.
View attachment 1552100
Happy racing!
That is a PROPER dossier! Thank you.Back to the subject of the BMW M3 GTR ALMS... The imaginative excuse I’d cooked up to justify to my wife buying a BDH shifter (my dear, it’s necessary to feel the thud of the BMW’s sequential gear shift) is starting to fall apart. Out of curiosity, I’ve been looking for more information, and contrary to what I thought and just as some of you are saying, seems that the manual transmission was the option most commonly used in that car.
Attaching an interesting and comprehensive document.
![]()