So it glows on the outside then, but nothing on the object ? I've done that mistake once. Illuminate mesh was the "bulb" but the glass in front of it was not set on alpha blend. Could be a hint.
I also lightened the rear light lenses as the defaults were very dark, which meant I had to redo the LODs too. A satin chrome config works quite well on the roll cage.hi there! this is such a nice mod! The sound and immersion are sublime!
besides the improvements in ext_config.ini of Masscot JK1977 and myself, which you can find here ,
I also spent some time improving the digital instruments file (as PERF was too big and fell off the display) .
please incorporate in your v1.1 release (all changes are showing the original value in comment ";was "... )
download
Enjoying this one soo much!
EDIT: I only now saw that lights (brake lights taillights, and headlights ) are no longer working,
and it seems this is caused by this the paint section here :
[Material_CarPaint_Metallic]
ACTIVE=1
Materials = BODY
UseMetallicReflections = 1
FlakesK = 0.7
ClearCoatThickness = 0.01
FresnelC = 0.03
SpecularMult = 0.45
AmbientSpecular = 0.3
BrightnessAdjustment = 0.8
AmbientSpecularEXP = 3
SpecularBase = 0.3, 20
SpecularSun = 1, 1000
FresnelMax = 0.7
So putting this to ACTIVE=0 will make the lights work again...
I don't know why , and would love to hear a better solution (that keeps the paint properties active but at the same time let the lights still work)
O and the handbrake power was set to 0 (???) I've set it to 1500, so it can put the car sideways in a corner...
Just to rule that possibility out I used no skin.
Hello.. this is the Brazil spec car. In the external view, the mirrors work, but in cockpit view they're black for me. Anyone else?Here is the link to the Copersucar F5A (4 spec 1978).
I had to make a lot of adjustments (improved textures by "MrHunt"), but everything is in line with the other 1978 cars (all running similar times in Kyalami 1976, compared to the real times from 1978).
I hope to check the cars (Brabham and Ferrari) to see if they also have compatible lap times.
In the versions (there are the races in which each "spec" was used).
I decided to put the "car weight - mass" higher in the first "spec" and took it down a bit in the last two, as you can see.
IMPORTANT
If you have an old version of these models, delete them to avoid conflicts.
You know, with all the crap i went thru with CSP 0.2.7, i'm now a bit sad that i didn't experience this one.
No issue for me on CSP 0.2.4 public and Pure 2.37 LCS. If CSP is not the cause, then could it be a specific version of Pure? Are you seeing this issue on Pure 2.38?
I'm using CSP 2.6 p1. It turns out I was seeing something black on the car reflected back, and I just needed to adjust the mirrors, heh.
I am from Canada,why i cant download it,link dont work!Here is the link to the Copersucar F5A (4 spec 1978).
I had to make a lot of adjustments (improved textures by "MrHunt"), but everything is in line with the other 1978 cars (all running similar times in Kyalami 1976, compared to the real times from 1978).
I hope to check the cars (Brabham and Ferrari) to see if they also have compatible lap times.
In the versions (there are the races in which each "spec" was used).
I decided to put the "car weight - mass" higher in the first "spec" and took it down a bit in the last two, as you can see.
IMPORTANT
If you have an old version of these models, delete them to avoid conflicts.
Not that' as I also have those rubber line on track and this option have never been activated
The sound model revs at lower rpm than what the engine rev (if that make sense). You need to find a car with equal or higher maximum RPM than the one that cut
Also from Canada and working fine
Good evening.
That's what I forgot.
In ppconfig, night, try to tweak the moon brightness. There might be a glare config in the pp script config, can't remember what's available in C13
DON't USE the latest Pure LCS 2.3x version! It has broken all 3rd party PP filters (C13 Aegis, Natural Mod PP filter, etc.) I normally use. The standard Pure PP filter is OK in daytime, but the day night transitions and night lighting look really bad for me in VR (Oculus Rift CV1). After several days of testing without any result, I switched back to Pure LCS 2.16 and C13 Aegis 2.04 (don't use newer versions, as they are made for Pure LCS 2.3x with poor results). It also works well with CSP 0.2.6/0.2.7-preview1, that I need to use as several VRC Hyperscars and Fuzos TCR cars need at least CSP 0.2.4 (don't use, AI is broken), CSP 0.2.5 (don't use, it's full of game breaking bugs) or CSP 0.2.6 (bug fix version; I use this version, as the only problems for me are the UGLY new Grass FX and the black icon in the upper left corner during races I barely see in VR).
This is a wonderful track. Wow. To driving with a Porsche 356 or Mercedes 300 Sl (1955) etc, its so funny.
