Assetto Corsa PC Mods General DiscussionPC

[MrLonguinha17]

Here is the link to the Copersucar F5A (4 spec 1978).

Download f178 copersucar f5a 20250126

Download File f178 copersucar f5a 20250126

sharemods.com

I had to make a lot of adjustments (improved textures by "MrHunt"), but everything is in line with the other 1978 cars (all running similar times in Kyalami 1976, compared to the real times from 1978).

I hope to check the cars (Brabham and Ferrari) to see if they also have compatible lap times.
In the versions (there are the races in which each "spec" was used).

I decided to put the "car weight - mass" higher in the first "spec" and took it down a bit in the last two, as you can see.


IMPORTANT
If you have an old version of these models, delete them to avoid conflicts.

 

[Alguecool]

Edited lights.ini with rear tail/brake light parameters, and cleaned those in the extension folder to avoid conflicts. Still, those lights are not working. There's the red glow, but no visual lightning of the bulbs or housing.

Any other ideas on what can be happening here?

So it glows on the outside then, but nothing on the object ? I've done that mistake once. Illuminate mesh was the "bulb" but the glass in front of it was not set on alpha blend. Could be a hint.

Here's a fonctioning one from me and the shader parameters for both objects (bulb and glass in front of it) :

Transparency set on YES for the glass and NO for the lights

If that can help...

 

[Masscot]

hi there! this is such a nice mod! The sound and immersion are sublime!

besides the improvements in ext_config.ini of Masscot JK1977 and myself, which you can find here ,

I also spent some time improving the digital instruments file (as PERF was too big and fell off the display) .

please incorporate in your v1.1 release (all changes are showing the original value in comment ";was "... )

download

Enjoying this one soo much!


EDIT: I only now saw that lights (brake lights taillights, and headlights ) are no longer working,
and it seems this is caused by this the paint section here :
[Material_CarPaint_Metallic]
ACTIVE=1
Materials = BODY
UseMetallicReflections = 1
FlakesK = 0.7
ClearCoatThickness = 0.01
FresnelC = 0.03
SpecularMult = 0.45
AmbientSpecular = 0.3
BrightnessAdjustment = 0.8
AmbientSpecularEXP = 3
SpecularBase = 0.3, 20
SpecularSun = 1, 1000
FresnelMax = 0.7


So putting this to ACTIVE=0 will make the lights work again...
I don't know why , and would love to hear a better solution (that keeps the paint properties active but at the same time let the lights still work)

O and the handbrake power was set to 0 (???) I've set it to 1500, so it can put the car sideways in a corner...

I also lightened the rear light lenses as the defaults were very dark, which meant I had to redo the LODs too. A satin chrome config works quite well on the roll cage.

 

[Fanapryde]

@Peter Boese, FYI:

Using CSP 0.2.7 prev, PureLCS and Natural PPF filter my rt_suzuka (which I hadn't used in a while) looked like this:

After trying other PPF's and several older CSP versions, without solving anything, I switched to Pure Gamma again, same PPF and look: issue solved:

 

[MasterFocus]

@Peter Boese, FYI:

Using CSP 0.2.7 prev, PureLCS and Natural PPF filter my rt_suzuka (which I hadn't used in a while) looked like this:

View attachment 1423992


View attachment 1423993

View attachment 1423994

After trying other PPF's and several older CSP versions, without solving anything, I switched to Pure Gamma again, same PPF and look: issue solved:

View attachment 1423995

View attachment 1423996

View attachment 1423997

I thought it was the skin that made the rubber that visible!!

 

[Fanapryde]

I thought it was the skin that made the rubber that visible!!

Just to rule that possibility out I used no skin.
While my Oulton Park is OK, others reported theirs looked like my suzuka.
Both are Reboot tracks, haven't had the issue on other tracks up to now (but didn't try a lot, took me long enough to find out what was wrong here...well, I still don't know really, just that switching from Pure LCS to Pure Gamma solved it.

 

[313]

@Peter Boese, FYI:

Using CSP 0.2.7 prev, PureLCS and Natural PPF filter my rt_suzuka (which I hadn't used in a while) looked like this:

View attachment 1423992


View attachment 1423993

View attachment 1423994

After trying other PPF's and several older CSP versions, without solving anything, I switched to Pure Gamma again, same PPF and look: issue solved:

View attachment 1423995

View attachment 1423996

View attachment 1423997

maybe it has something to do with the "groove fix" for certain rt tracks?

[SHADER_REPLACEMENT_...]
ACTIVE=1
DESCRIPTION= shadows cast on white lines
MATERIALS= groovesuzuka, groovesuzukalayouts
BLEND_MODE = ALPHA_TEST
IS_TRANSPARENT = 0

 

[chas1723]

@Peter Boese, FYI:

Using CSP 0.2.7 prev, PureLCS and Natural PPF filter my rt_suzuka (which I hadn't used in a while) looked like this:

View attachment 1423992


View attachment 1423993

View attachment 1423994

After trying other PPF's and several older CSP versions, without solving anything, I switched to Pure Gamma again, same PPF and look: issue solved:

View attachment 1423995

View attachment 1423996

View attachment 1423997

I noticed this same issue today.

 

[PGMurphy]

Here is the link to the Copersucar F5A (4 spec 1978).

Download f178 copersucar f5a 20250126

Download File f178 copersucar f5a 20250126

sharemods.com

I had to make a lot of adjustments (improved textures by "MrHunt"), but everything is in line with the other 1978 cars (all running similar times in Kyalami 1976, compared to the real times from 1978).

I hope to check the cars (Brabham and Ferrari) to see if they also have compatible lap times.
In the versions (there are the races in which each "spec" was used).

I decided to put the "car weight - mass" higher in the first "spec" and took it down a bit in the last two, as you can see.


IMPORTANT
If you have an old version of these models, delete them to avoid conflicts.

Hello.. this is the Brazil spec car. In the external view, the mirrors work, but in cockpit view they're black for me. Anyone else?

Also, the sound bank doesn't quite work for the engine or drivetrain, as the sound cuts out at the top of the rev range. Maybe there is a fix for this as well. The car feels great though!

 

[MasterFocus]

Hello.. this is the Brazil spec car. In the external view, the mirrors work, but in cockpit view they're black for me. Anyone else?

Also, the sound bank doesn't quite work for the engine or drivetrain, as the sound cuts out at the top of the rev range. Maybe there is a fix for this as well. The car feels great though!

View attachment 1424011View attachment 1424013

Fine on my side for the mirrors

 

[MrLonguinha17]

Hello.. this is the Brazil spec car. In the external view, the mirrors work, but in cockpit view they're black for me. Anyone else?

Also, the sound bank doesn't quite work for the engine or drivetrain, as the sound cuts out at the top of the rev range. Maybe there is a fix for this as well. The car feels great though!

View attachment 1424011View attachment 1424013

I am using the CSP 2.5 version.
Cockpit View "Spec Brasil" with mirrors working.

In the editor, just like you, the mirrors also worked.
About the engine speed cut, I don't know if you tried using (another gear ratio)?

 

[Tetri]

@Peter Boese, FYI:

Using CSP 0.2.7 prev, PureLCS and Natural PPF filter my rt_suzuka (which I hadn't used in a while) looked like this:

View attachment 1423992


View attachment 1423993

View attachment 1423994

You know, with all the crap i went thru with CSP 0.2.7, i'm now a bit sad that i didn't experience this one.

Something is lurking in the dark code, waiting to **** things up just a little, just uncanny enough for you to wonder what's wrong.
For me it was the 2D trees that became Nintendo64'esque, the lighting that was completely off, and for whatever reason i still have tyres covered in poo when i run in grass.

i set up CSP, updated the 0.2.7 preview, saved it as a preset, and avoid to load any old preset into it. It's been working perfectly for 2 days now, but as soon as it shows any sign of conscioussness or mutiny, i shotgun the whole thing.

 

[X90]

@Peter Boese, FYI:

Using CSP 0.2.7 prev, PureLCS and Natural PPF filter my rt_suzuka (which I hadn't used in a while) looked like this:

View attachment 1423992


View attachment 1423993

View attachment 1423994

After trying other PPF's and several older CSP versions, without solving anything, I switched to Pure Gamma again, same PPF and look: issue solved:

View attachment 1423995

View attachment 1423996

View attachment 1423997

Can confirm that my RT Oulton looks exactly like the first few photos. Latest CSP, latest Pure LCS. The road texture is basically completely scrubbed by the rubbered in line.

 

[alfredwayne]

Dont know if its this setting (should be off by default) but if its ticked on, try turning it off. On the Mills Metro Park track and some fat alfie tracks I have to turn this setting off otherwise I get that sort of rubbered lined over everything.

 

[OooAhh Cantona]

@Peter Boese, FYI:

Using CSP 0.2.7 prev, PureLCS and Natural PPF filter my rt_suzuka (which I hadn't used in a while) looked like this:

View attachment 1423992


View attachment 1423993

View attachment 1423994

After trying other PPF's and several older CSP versions, without solving anything, I switched to Pure Gamma again, same PPF and look: issue solved:

View attachment 1423995

View attachment 1423996

View attachment 1423997

No issue for me on CSP 0.2.4 public and Pure 2.37 LCS. If CSP is not the cause, then could it be a specific version of Pure? Are you seeing this issue on Pure 2.38?

Or this? 👇

Dont know if its this setting (should be off by default) but if its ticked on, try turning it off. On the Mills Metro Park track and some fat alfie tracks I have to turn this setting off otherwise I get that sort of rubbered lined over everything.

View attachment 1424027

 

[PGMurphy]

I am using the CSP 2.5 version.
Cockpit View "Spec Brasil" with mirrors working.

In the editor, just like you, the mirrors also worked.
About the engine speed cut, I don't know if you tried using (another gear ratio)?

I'm using CSP 2.6 p1. It turns out I was seeing something black on the car reflected back, and I just needed to adjust the mirrors, heh.

As for the sounds, I did try using one higher and one lower ratio than the default, but the omission of engine sound remains near the rev limit, typically when I'm up shifting or blipping the throttle on downshifts. I encounter this issue with some mods on occasion; I can't remember what causes it.

Otherwise, this is one of my favourite of your 78s to drive so far.

 

[CMB1974]

Here is the link to the Copersucar F5A (4 spec 1978).

Download f178 copersucar f5a 20250126

Download File f178 copersucar f5a 20250126

sharemods.com

I had to make a lot of adjustments (improved textures by "MrHunt"), but everything is in line with the other 1978 cars (all running similar times in Kyalami 1976, compared to the real times from 1978).

I hope to check the cars (Brabham and Ferrari) to see if they also have compatible lap times.
In the versions (there are the races in which each "spec" was used).

I decided to put the "car weight - mass" higher in the first "spec" and took it down a bit in the last two, as you can see.


IMPORTANT
If you have an old version of these models, delete them to avoid conflicts.

I am from Canada,why i cant download it,link dont work!

 

[MasterFocus]

Dont know if its this setting (should be off by default) but if its ticked on, try turning it off. On the Mills Metro Park track and some fat alfie tracks I have to turn this setting off otherwise I get that sort of rubbered lined over everything.

View attachment 1424027

Not that' as I also have those rubber line on track and this option have never been activated

As for the sounds, I did try using one higher and one lower ratio than the default, but the omission of engine sound remains near the rev limit, typically when I'm up shifting or blipping the throttle on downshifts. I encounter this issue with some mods on occasion; I can't remember what causes it.

The sound model revs at lower rpm than what the engine rev (if that make sense). You need to find a car with equal or higher maximum RPM than the one that cut

I am from Canada,why i cant download it,link dont work!

Also from Canada and working fine

 

[MrLonguinha17]

I am from Canada,why i cant download it,link dont work!

Good evening.
Sometimes it's hard to download (because of the ads that appear).

Before I started using the "blocker", what I usually did was: click once, wait a bit (an ad would appear), close the link, open it again and then at the top of the screen on the right (the blue circle would appear), indicating that the download was starting.

It's a bit annoying at first, but once you get the hang of it, it's easy.
I just don't put it on another server, like (Mediafire), because it would limit me to 20GB, and then I would have to regularly delete the links to put new ones.

In the share, the links are always active.

I'm using CSP 2.6 p1. It turns out I was seeing something black on the car reflected back, and I just needed to adjust the mirrors, heh.

As for the sounds, I did try using one higher and one lower ratio than the default, but the omission of engine sound remains near the rev limit, typically when I'm up shifting or blipping the throttle on downshifts. I encounter this issue with some mods on occasion; I can't remember what causes it.

Otherwise, this is one of my favourite of your 78s to drive so far.

View attachment 1424028

That's what I forgot.
Where can I get this menu to appear (mirror editing)?
I had activated it a while ago, but I don't remember it anymore.

If you could show me a (print) where it is in the (CSP), I'd appreciate it.

About the Copersucar sound (cuts in the turns), I'll see what I can improve (maybe by modifying the "sfx" file) or the "sounds" file in the "Data" folder with something else.


A basic adaptation of the Honda RA301 skin (1968) in the British GP.

The skin map is not very easy, because to edit the numbers (I only know how to use it in Windows Paint 3D).

Add new positioning of the spark plug "logo" (Champions), Shell logo and the name "John Surtees" on the nose of the car.

 

[RMi_wood]

maybe it has something to do with the "groove fix" for certain rt tracks?

[SHADER_REPLACEMENT_...]
ACTIVE=1
DESCRIPTION= shadows cast on white lines
MATERIALS= groovesuzuka, groovesuzukalayouts
BLEND_MODE = ALPHA_TEST
IS_TRANSPARENT = 0

perhaps the better fix would be...:

[SHADER_REPLACEMENT_...]
MATERIALS= groovesuzuka, groovesuzukalayouts
SHADER = ksPerPixelAlpha
PROP_... = alpha, 0.6
CAST_SHADOWS = 0
BLEND_MODE = ALPHA_BLEND
IS_TRANSPARENT = 1

(untested)

 

[Jeroen V]

Good morning,

Would it be possible compiling all changes/adjustments on the Audi A4 STW by jk1977 into one updated package?
I like the car very much from the start, but am sort of losing track on al the changes and adjustments made to it meanwhile.
Would be great having one single updated package. Thanks in advance and have the best of day.

 

[Perico Lospa]

... i went thru with CSP 0.2.7... as soon as it shows any sign of conscioussness or mutiny, i shotgun the whole thing.

Violence is never the solution.

In these cases, instead of shooting, I usually spray the PC with flammable liquid, set it on fire and sit down to watch calmly the hypnotic dance of the flames, which relaxes me a lot...

 

[StoffelWaffle]

God damn nuclear winter looking night that ! I'm on CSP 0.2.4 and the latest Pure (2.35?) and the moon is...so.. BRIGHT.

Only happens with C13 Aegis from 5.15 to 5.55 am (weird innit), other PP filters are not affected. Anybody has a fix ? Besides, ya know, changing PP filter (duh).

 

[Peter Boese]

@Peter Boese, FYI:

Using CSP 0.2.7 prev, PureLCS and Natural PPF filter my rt_suzuka (which I hadn't used in a while) looked like this:

View attachment 1423992


View attachment 1423993

View attachment 1423994

After trying other PPF's and several older CSP versions, without solving anything, I switched to Pure Gamma again, same PPF and look: issue solved:

View attachment 1423995

View attachment 1423996

View attachment 1423997

Please if you discover such things, always switch to default wfx and set it to LCS mode. If its the same there it is caused by the LCS shaders of CSP. Pure does not have an influence on track specific materials!

 

[Tetri]

God damn nuclear winter looking night that ! I'm on CSP 0.2.4 and the latest Pure (2.35?) and the moon is...so.. BRIGHT.

Only happens with C13 Aegis from 5.15 to 5.55 am (weird innit), other PP filters are not affected. Anybody has a fix ? Besides, ya know, changing PP filter (duh).

View attachment 1424045

In ppconfig, night, try to tweak the moon brightness. There might be a glare config in the pp script config, can't remember what's available in C13

Ppfilter, right click edit, glare, play with the luminance and the luminance treshold, just in case.

 

[peppemuratore]

@Peter Boese, FYI:

Using CSP 0.2.7 prev, PureLCS and Natural PPF filter my rt_suzuka (which I hadn't used in a while) looked like this:

View attachment 1423992


View attachment 1423993

View attachment 1423994

After trying other PPF's and several older CSP versions, without solving anything, I switched to Pure Gamma again, same PPF and look: issue solved:

View attachment 1423995

View attachment 1423996

View attachment 1423997

I had same problem with Pyyer's extensions. Now it seems solved

 

[Pfalzdriver]

thanks , do you know if is something on data files i can fix or is it a blender ...

Sorry, was afk (or pretty wasted) during the weekend.

You'll need to replace those two textures with proper ones. Either in every skin folder or global with a csp configuration.

 

[shi]

Bahrain F1 2004-2008 v1.01

https://www.patreon.com/posts/bahrain-f1-2004-120674643

View attachment 1423386
Add-on to recreate the Bahrain F1 2004-2008.
Add a new layout.

The reason for the 2004-2008 period is that the road surface has been painted since 2009.

-CSP required

How to install:
Drag and drop into the folder name: fn_bahrain

https://www.patreon.com/posts/bahrain-circuit-92351267

Credits & Thanks;
Bahrain v1.0.1 by Fenryr

Add-on by @shi (shin956)
The billboard texture base is taken from Bahrain (F1C, CTDP's rFactor version base) by dmarques.
Test and Feedback by @Breathe

Enjoy.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;

Added physics_alt.kn5.
Updated surfaces.ini.
Updated ext_config.ini for each layout. ([DIRT] section)
- Thanks M1GHTYM4VS for the suggestion.

Bahrain F1 2004-2008 v1.01
The link is in the quote.

v1.01 changelog;
Added physics_alt.kn5.
Updated surfaces.ini.
Updated ext_config.ini for each layout. ([DIRT] section)
- Thanks M1GHTYM4VS for the suggestion.

When moving to the edge of the road surface off the ideal line, a dust cloud now rises.

 

[StoffelWaffle]

In ppconfig, night, try to tweak the moon brightness. There might be a glare config in the pp script config, can't remember what's available in C13

Ppfilter, right click edit, glare, play with the luminance and the luminance treshold, just in case.

I tried, no dice

 

[Frank25]

God damn nuclear winter looking night that ! I'm on CSP 0.2.4 and the latest Pure (2.35?) and the moon is...so.. BRIGHT.

Only happens with C13 Aegis from 5.15 to 5.55 am (weird innit), other PP filters are not affected. Anybody has a fix ? Besides, ya know, changing PP filter (duh).

View attachment 1424045

DON't USE the latest Pure LCS 2.3x version! It has broken all 3rd party PP filters (C13 Aegis, Natural Mod PP filter, etc.) I normally use. The standard Pure PP filter is OK in daytime, but the day night transitions and night lighting look really bad for me in VR (Oculus Rift CV1). After several days of testing without any result, I switched back to Pure LCS 2.16 and C13 Aegis 2.04 (don't use newer versions, as they are made for Pure LCS 2.3x with poor results). It also works well with CSP 0.2.6/0.2.7-preview1, that I need to use as several VRC Hyperscars and Fuzos TCR cars need at least CSP 0.2.4 (don't use, AI is broken), CSP 0.2.5 (don't use, it's full of game breaking bugs) or CSP 0.2.6 (bug fix version; I use this version, as the only problems for me are the UGLY new Grass FX and the black icon in the upper left corner during races I barely see in VR).

These are my settings, if someone wants to test it:

CSP 0.2.6/0.2.7-preview1 + Pure 2.16 LCS + C13AEGIS 2.04

Test conditions for a bright summer day:
Track "Kunos Nordschleife Standard layout", date "20th June 2024", time "13:00", weather "clear".

Settings in Pure: (reset Pure to standard settings before starting)

PP Saturation 1.3 (very high setting, to get a good summer feeling)
PP Brightness 1.0
PP Contrast 1.01
PP Godrays 1.5
PP Night Sky Preset: Standard
PP Glare Style: Aggressive
PP User Adjustments (Active): Power of the sun, GADU spec godrays, Reflection tweak
PP Tone mapping function: C13 Curve Filmic
Pure Night/Sky: Moon : moon.appearance: 5.0 (changes the brightness of the moon)
Pure Night/Sky: Stars : stars.appearance: 5.0 (changes the brightness of the stars)
Pure Shaders: sunblinding: fade in speed of the effect: 0.010 (the sunblinding works now immediately as in real life)

These settings are made for the use with my Oculs Rift CV1, but should also work with other VR Headsets or monitor setups.