Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 157,303 comments
  • 51,179,839 views
VAO = vertex ambient occlusion.
In layman terms, another hint of shading. Place the vaopatch files near the kn5 ones. That's it.








VAOs:

gt3_track

hawaii_raceway_park

helsinki_thunder
I really like your collection of vao patches, do you have the possibility to pack them all together in only one file, or do a library where all of them are available in one place? I think I miss most of them already.
 
I really like your collection of vao patches, do you have the possibility to pack them all together in only one file, or do a library where all of them are available in one place? I think I miss most of them already.
yep, a shared gdrive/mediafire/dropbox/mega folder would be great. would probably help breathe to include the links in his spreadsheet.
 
Last edited:
I really like your collection of vao patches, do you have the possibility to pack them all together in only one file, or do a library where all of them are available in one place? I think I miss most of them already.
yep, a shared gdrive/mediafire/dropbox/mega folder would be great. would probably help breathe to include the links in his spreadsheet.
Yes, it's inevitable at this point. Also because the list is growing and it will become a p.i.t.a. to manage in the future.
Will think of something on the incoming week.
 
@CrisT86 :
as you requested, a little reminder.
Thanks to you
Due to the fact he re-released it, now i have to re-check the whole update in order to be sure that it's working fine XD
I hope tomorrow to be able to find time, with these temperature (over 35° outside and almost 30° inside) keep the pc cold is extremely difficult while stay on track for hours atm
Send coolant. The poor guy (and his PC) are suffering in a heat-wave.
 
Optional ext_config with better rainfx thanks to @twobegreen. Added @twobegreen to the track credits.

On a side note, anyone know how you can update a file on Mega with a new version but still keep the same download link? I would like to add this ext_config to the original package for anyone who downloads the track in the future, but I don't want to have to change the link.
Thanks for this absolutely lovely new version of the track, mate.

Top work. Now wish Laguna Seca historic from Legion got the same treatment lol
 
Probably not aware of summer in the Mediterranean :)

Keep it low cris all good I suppose
I'm italian, so i know what is mediterranean summer but above 24°C i start hating the warm temperature, so you can imagine how bad is at 35°C without wind (which is the main problem because with wind the hot temperature can be endured) and my damn air conditioning broke up at the right timing, of course... :lol::lol::lol::lol:
 
I'm italian, so i know what is mediterranean summer but above 24°C i start hating the warm temperature, so you can imagine how bad is at 35°C without wind (which is the main problem because with wind the hot temperature can be endured) and my damn air conditioning broke up at the right timing, of course... :lol::lol::lol::lol:
Mate didn't mean you. I know you are Italian :)
 
I know I missed to change the lotus and hrt sound but the sound engine for the other cars works. People confirmed it.

Check the SFX folder if the sound bank is correctly named and that the GUID.txt looks correct
I´ve deleted the mod and made a fresh installation.
Checked everything, found nothing wrong in the files.
Now only the RedBull, Toro Rosso, Renault, Lotus, HRT and Sauber are missing their sounds.
 
Yes, it's inevitable at this point. Also because the list is growing and it will become a p.i.t.a. to manage in the future.
Will think of something on the incoming week.
The most elegant solution would be to feed your vao patches into the CSP github repo (https://github.com/ac-custom-shaders-patch/acc-extension-extra-vao/tree/master) as a single source of truth so that CM downloads them automatically - and also to avoid duplicates. Posting them on the CSP discord might be the fastest way to get them uploaded to github but I could be wrong...
 
Unfortunately the Linolafett version is way too unfinished in order to be re-worked with CSP things. So unless he will update it (i don't think he will) there's no other solution than doing the updates on other versions.
Yeah, I'm afraid that's true. But at the same time some of these add ons are so complete (I remember the Zandvoort expansion added even entire buildings and grandstands, it'd be awesome to see that kind of work on that version of Montreal TBH)
It just saddens me to see this mod be left abandoned and rips be worked instead
 
Canada 2022 Track Update (Updated by Marc_13000) by CrisT86

!!!IMPORTANT!!!

BE SURE to download this update before applying my update ->

RECCOMENDED: Download the track skin by Daniel Paez here ->

CHANGELOG:

  • New scratch made ext_config featuring RainFX, LightFX, GrassFX, Seasons
  • New VAO patches
  • New TV Cams by CrisT86
  • New TV Cams by @racealot
  • New AI (from racealot i think, but i'm not sure because it's passed a while since the first update in 2021)

View attachment 1161565View attachment 1161566View attachment 1161567View attachment 1161568View attachment 1161569View attachment 1161570View attachment 1161571View attachment 1161572View attachment 1161573

DOWNLOAD LINK: https://sharemods.com/4grtvud6n046/Marc_13000_Canada_2021_UPDATE_by_CrisT86.rar.html
Link for download is now available. Be sure to download the update from RD and the track skin for the best experience.
Be sure to check (till the end of the weekend the RD for track skin update by Daniel Paez as always he do).

In the pack you'll find also the cams from @racealot (i hope is not a problem for him)

Enjoy
 
Last edited:
fyi : there's a new entry on Velo's (Porsche 911 Carrera 3.2 Clubsport)

yet another Porsche for the collection :)

edit : unfortunately it has a noticeable big gap in the dash, allowing to see the road and left front wheel :(

Velo will check that and fix it. It's a nice little car though, one of the first 911s I can drive comfortably at Goodwood like I would a real one - 3rd and 4th all the way except for the chicane. My instructors have all been very adamant: for a fast lap no unnecessary gear changes and keep off the first apex at Madgwick. It still slides appropriately, but it shows how some other 911 mods tend to be way too dramatic in handling and grip. it is also great fun at Alfie's new unbelievable masterpiece, Battenbergring.
 
I'm italian, so i know what is mediterranean summer but above 24°C i start hating the warm temperature, so you can imagine how bad is at 35°C without wind (which is the main problem because with wind the hot temperature can be endured) and my damn air conditioning broke up at the right timing, of course... :lol::lol::lol::lol:
It's brutal and miserable, you're not alone...naked simracing all the way. :D
 
Velo will check that and fix it. It's a nice little car though, one of the first 911s I can drive comfortably at Goodwood like I would a real one - 3rd and 4th all the way except for the chicane. My instructors have all been very adamant: for a fast lap no unnecessary gear changes and keep off the first apex at Madgwick. It still slides appropriately, but it shows how some other 911 mods tend to be way too dramatic in handling and grip. it is also great fun at Alfie's new unbelievable masterpiece, Battenbergring.
I didn't even get to drive it because of the stupid sunglasses and floating harness clipping through my view in VR.
I really don't understand this godawful Facebook trend of swapping in badly-made bare-headed driver models when they invariably look ridiculous and introduce new problems. There's really nothing at all wrong with a lot of the helmeted Kunos driver models. The helmets do a great job of hiding dead-eyed waxwork faces that wouldn't look out of place on a week-old corpse.

Screenshot_porsche_911_carrera_clubsport_glen_reworked_18-6-122-12-31-52.jpg Screenshot_porsche_911_carrera_clubsport_glen_reworked_18-6-122-12-34-47.jpg
 
Last edited:
I didn't even get to drive it because of the stupid sunglasses and floating harness clipping through my view in VR.
I really don't understand this godawful Facebook trend of swapping in badly-made bare-headed driver models when they invariably look ridiculous and introduce new problems. There's really nothing at all wrong with a lot of the helmeted Kunos driver models. The helmets do a great job of hiding dead-eyed waxwork faces that wouldn't look out of place on a week-old corpse.

View attachment 1162166
I didn't even get to drive it because of the stupid sunglasses and floating harness clipping through my view in VR.
I really don't understand this godawful Facebook trend of swapping in badly-made bare-headed driver models when they invariably look ridiculous and introduce new problems. There's really nothing at all wrong with a lot of the helmeted Kunos driver models. The helmets do a great job of hiding dead-eyed waxwork faces that wouldn't look out of place on a week-old corpse.

View attachment 1162166 View attachment 1162172
It's a mistake. Just swap in this driver3D.ini. If you don't like the open face just put any driver you like.

I'll get Velo to adjust the harness so it fits the driver or vice versa


EDIT here is a quick and dirty driver size change. not perfect but better:
 

Attachments

Last edited:
It's a mistake. Just swap in this driver3D.ini

i'll get Velo to adjust the harness so it fits the driver or vice versa
Yeah, apologies if I sounded harsh but I'd kind of given up on Velo cars a long time ago because of the terrible QC. I only downloaded this one because of your comments about the handling and because I respect your opinion. I really don't have any patience at all these days for cars with the same basic and obvious errors that have been reported for years. It's like groundhog day.
 
Yeah, apologies if I sounded harsh but I'd kind of given up on Velo cars a long time ago because of the terrible QC. I only downloaded this one because of your comments about the handling and because I respect your opinion. I really don't have any patience at all these days for cars with the same basic and obvious errors that have been reported for years. It's like groundhog day.
Indeed!

59224541-0-image-a-16_1655544714469.png
 
Last edited:
FREE Release:
-----------------------------------------------------------------------------------------------------------------------------------
Renault Sport Spider 1.1



Here is the update for the Renault Sport Spider.

I would firstly like to thank @norms & @Masscot for helping fix the known issues from version 1.0

Change Log:
  • Data file now unencrypted for those who like to tinker or have direct drive wheels etc
  • Revised engine limiter to 6800rpm as per real car.
  • Revised drivetrain, driver and ai ini
  • Mirrors are now fixed
  • Dials added to lights.ini to enable them at night
  • Number plate lights meshes now split so that black housing doesn't light up too
  • Tweaked LED display to be on at day and dimmer at night.
  • Repositioned LED display for VR
  • Added LOD_D
  • Roll cage texture baked AO
  • Revised leather texture on steering wheel
Known issues - rear blinkers wont work due to how rear lights mesh are, numberplate lights do not light up numberplate itself. Looking into fixing these.

Enjoy!

-------------------------------------------------------------------------------------------------------------------------------------

SIMPLYGON ISSUE

On a side note I've spoken to one of the managers at Simplygon whose advised they are having issues server side for their free user license registration which is casuing the problem for those who do not have a full one. They are working on it so we should have lods generation back soon(ish)
 
Last edited:
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back