Assetto Corsa PC Mods General DiscussionPC

[Twisteddrift]

Here's another skin for the Porsche 963.
Jota Motorsport just released some pics of there upcoming new ride so I thought I'd take a stab at it.

https://mega.nz/file/q0QymCbK#CT7POIGQ_ME6Sd4Lfdycnbf6KvA9JJn8UY8__jpvwbw

View attachment 1236003
View attachment 1236004

Where can I find the car mod? The skin looks awesome!

 

[jaqory]

Final Update: We're getting close to the release of the C5R pack! 13 European Skins and 1 US privateer skin coming this March, just a few more skins and I'll be done. GET READY!

 

[Wlynsan]

FYI - took the 300ZX into the CSP Showroom and enabled the WeatherFX Debug app, and saw the windscreen & other glass with rain drops (internally & externally).

View attachment 1235287

And now that you have placed a wiper, would you like any assistance with say CSP-wiper? I'll give it a twirl...

View attachment 1235288

Note: car now requires driver/passenger windows.

How to activate this function in the CSP showroom? thx

 

[Fullnoise]

Good afternoon. I'm trying to adapt a Ferrari 312/66 from another model from 1965.

As the "original" wheels are smaller than the real ones from 1966, I "imported" the wheels from the Ferrari 330P Spyder ( proportion x=1.0 , y=1.0 , z =1.0 , however in 3dsimed (I adjusted the size that I think is the most correct , it was more or less (rear x=0.90 and front x=0.82).

As you can see in the print ( figure A, what I would like it to be, figure B is what is on the track (this print is when "align using data" is active), but it is unmarked when I go to the track.

In the print inside the lane you can see (that the size is not what I wanted).

Question.
Where is the problem?
Why is it not in the proportion I want?
Is there any "trick"?

It usually happens on all the cars I try to adapt (my simple solution is to try to "import" a "wheel" or just the "tire" of the size I want.

But then what are the "proportions" for " x - y - z " for each piece within 3dsimed?

If anyone can help me I would appreciate it.

When resizing wheels in 3dsimEd, I always resize each part within the WHEEL parent. Resizing the parent more than often does not work. I know it sounds tedious but it is the best way and then parts you don't want affected, eg brake disc will not be affected.

 

[Nuck Chorris]

All layouts have AI and map. Where did you get your version?

View attachment 1235768

Download motorland aragon complex Neil Shaw

Download File motorland aragon complex Neil Shaw

sharemods.com

Links on comments.

 

[Rodger Davies]

Anybody knows why some cars refuse to be painted with CM ? Correct files used (Body.dds for txDiffuse, metail_detail.dds for txDetail) and nothing changes.

Which car? Feel free to DM me.

 

[RMi_wood]

Drift Spirits - Showroom Pack1 v1.0

features:

• 5 showrooms / driveable showrooms for advanced photographic screenshots

credits:

• converted from the mobile game by @RMi_wood

info:

• 2 more packs will follow
• enjoy these small tasty cakes with your morning cofee or tea!

:: DOWNLOAD ::

 

[racealot]

How to activate this function in the CSP showroom? thx

Here are the 4-steps in screenshots... (patreon CSP)

1. CM - Content - Cars

2. Showroom dialog-window

3. Showroom Menu (right-screen-margin) - WeatherFX Debug App

4. WeatherFX Debug App - Rain debug option

Voila!

 

[safi hellie]

Drift Spirits - Showroom Pack1 v1.0

features:

• 5 showrooms / driveable showrooms for advanced photographic screenshots

credits:

• converted from the mobile game by @RMi_wood

info:

• 2 more packs will follow
• enjoy these small tasty cakes with your morning cofee or tea!

:: DOWNLOAD ::

Great, cheers for these, i find drivable showrooms to be a lot of fun to mess around with.
One of my ideas was for a car show one, so like imagine a car show on a field etc with cars lined up.

Anyway i notice one of these the car park has pit slots, when i tried that (on my car show) all the cars had the engines running and some tried to move, how would i make them all static?

Not had a chance to try yours yet so maybe yours do the same.
But if they don't. I'd love to know how to do that.

 

[Sodemo]

My thoughts exactly on above comment - that short chute into tricky multi-apex right hander is extremely bumpy on the left hand side and unsettles the car so you can't turn right - best to drive around it. This is different than the on-board video on Youtube from +5 years ago where drivers are able to start turning from the left side (racing line). However, if it truly is there in the laser scan then so be it...

Thank you Reboot team for yet another wonderful job on Oulton Park.

Were the Fosters portion of the track included in the road mesh data used in ACC? Does ACC have the fosters layout? Reason I ask is that part of the track in the rt_oulton is so bumpy, I wonder if its just using the visual mesh or something...?

 

[RMi_wood]

Great, cheers for these, i find drivable showrooms to be a lot of fun to mess around with.
One of my ideas was for a car show one, so like imagine a car show on a field etc with cars lined up.

Anyway i notice one of these the car park has pit slots, when i tried that (on my car show) all the cars had the engines running and some tried to move, how would i make them all static?

Not had a chance to try yours yet so maybe yours do the same.
But if they don't. I'd love to know how to do that.

try pause + F7 ?
you can also add cars in CM in the showroom versions

 

[Fanapryde]

Where can I find the car mod? The skin looks awesome!

Here: https://www.assettocorsamods.org/product/assetto-corsa-lm-hypercar-963-lmdh/

 

[shi]

Taupo International Motorsport Park v1.03

Taupo International Motorsport Park | shin956

Get more from shin956 on Patreon

www.patreon.com

Taupo International Motorsport Park and Events Centre (previously known as the Bruce McLaren Motorsport Park) is a motorsports circuit located in Broadlands Road, Taupo, New Zealand.
The circuit was an upgrade from a 1.398 km (0.869 mi) Taupo Car Club's circuit to the new 3.500 km (2.175 mi) international layout in 2006. (Wikipedia)
Conversion from rFactor.

-CSP recommended
-32 pit/start
-AI, cam
-6 layouts

Credits & Thanks;
Original rFactor Track by Daniel Greenwood
-Thanks for giving me permission.

AC Converted by @shi (shin956)
Terrain and tyre walls a parallax texture by Tyrone/Nukedrop
logo.png and sections.ini by @Fanapryde
cameraman, background, tree, Dragstrip objects and some textures by kunos
Test and Feedback by @Breathe , @macko68 , @Masscot

Enjoy.
Converted upon request by Patreon member john brown.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;

-Added Dragstrip layout.
-The UI layout name now matches the name on the official website.
-Tyre bundles and bollards moved back a little from the kerb (International (2015-present) layout).
-Shorter grassfx lengths.

v1.02 changelog;
-Fixed an issue with Dragstrip layout that prevented time measurement.
-Hidden 3Dgrass objects.

v1.03 changelog;
-Fixed an issue with the chicane tire walls on the International (Pre 2015) layout being out of alignment. (Thanks FFF789 and Fanapryde for the report.)

 

[jac0]

Here are the 4-steps in screenshots... (patreon CSP)

<snip>
View attachment 1236060

<snip>

Voila!

and if you don't have that WeatherFX Debug app ... where to get and/or enable it? Thx!

WeatherFX is on in CSP and both Controller and Weather script are on :

 

[ClydeYellow]

Does anybody know what may have caused Content Manager to stop showing me options when creating custom previews? If I click CTRL+Shift+P or click on the tab, it opens the Custom Showroom, but I don't get the "options" window. How could I make it reappear?

 

[SpeedStar2000]

Where can I find the car mod? The skin looks awesome!

Simdream 963 that's the one you're looking for

Final Update: We're getting close to the release of the C5R pack! 13 European Skins and 1 US privateer skin coming this March, just a few more skins and I'll be done. GET READY!

View attachment 1236019

now this i can't wait to have. This is awesome!!

 

[graveltrap]

Were the Fosters portion of the track included in the road mesh data used in ACC? Does ACC have the fosters layout? Reason I ask is that part of the track in the rt_oulton is so bumpy, I wonder if its just using the visual mesh or something...?

ACC only includes the international circuit as that is what is used for British GT.



One the subject of the International Layout...

In all my years of going to Oulton Park (Gold Cup, British GT, Touring Cars), Hislop's has always been used, the run down from Brittens through Hilltop to Knickerbrook is simply to fast to be considered safe these days I guess.

However in a video game this is not so much of a problem, and we are presented with an interesting alternative, I would simply rename the two variations to "International" (includes Hislop Chicane) and "International no Chicane" (without Hislop Chicane).

Job done Bob is your proverbial uncle and all that.

 

[Kurt Woods]

I added the WEC numberplates and the driver names as well, so 2 skins now and touched up a couple little things I noticed as well.
Both skins here. https://mega.nz/file/y0hhSLrJ#GK8FMMsQ13v652U-Im50kHTZR-aeZ7Kqt2abwGK0SYk
I think I'm done now!

 

[Aaron Green]

Afternoon - quick question, I recently went and got a VR headset and im just trying to get the settings fine tuned for the rainy conditions...how do i get rid of the little rain drops in cockpit mode. It literally looks like im driving over hundreds of ball bearings or something. It looks fairly ridiculous if im honest. I've disabled all rain drops in RainFx which is whats confusing me. Should i just disable rain FX?

 

[Vassalfada]

Good afternoon. I'm trying to adapt a Ferrari 312/66 from another model from 1965.

As the "original" wheels are smaller than the real ones from 1966, I "imported" the wheels from the Ferrari 330P Spyder ( proportion x=1.0 , y=1.0 , z =1.0 , however in 3dsimed (I adjusted the size that I think is the most correct , it was more or less (rear x=0.90 and front x=0.82).

As you can see in the print ( figure A, what I would like it to be, figure B is what is on the track (this print is when "align using data" is active), but it is unmarked when I go to the track.

In the print inside the lane you can see (that the size is not what I wanted).

Question.
Where is the problem?
Why is it not in the proportion I want?
Is there any "trick"?

It usually happens on all the cars I try to adapt (my simple solution is to try to "import" a "wheel" or just the "tire" of the size I want.

But then what are the "proportions" for " x - y - z " for each piece within 3dsimed?

If anyone can help me I would appreciate it.

This happens because your wheel object scale is not set on 1.00000.

You either need to edit your wheel object scale separately and save it in 3se format, before importing it in your car (using the "replace" function in 3Dsimed), or you can rescale each sub-objets (rims, tires, etc) directly on the car model (which can be a bit tricky depending on the objects numbers and proportions).

The most important is that your main WHEEL_LF, WHEEL_LR etc. objects scale are set on 1.00000. That way, you'll never have any scaling issue with the wheels ingame (wheels are the only instances that don't support rescaling in AC).

Then, you might need to adjust the tires radius in the tires.ini (physics) so your wheels are not sinking or flying over the track.

 

[safi hellie]

I converted this, its a bit ropey thus far and i'm flitting between stuff so i reckon i will just upload it here and see what happens to it, if anything.
The steering wheel doesn't even turn yet, the wheels do though.

Its an interesting thing in real life.

I'm making a cup version from it as it uses 997 base and engine, and owes a lot in the look department to Mr Porsche.
Despite its looks, it ain't electric. Which is good.

Its a rinspeed zazen.

Anyway I'll upload it at some point tomorrow.
Anyone think they would be interested in making it shine?

The cup version i'll be focusing on.

 

[RacingSounds]

Hi everyone, I've got a couple of questions regarding track modding. I just started a new project, and I'm looking to do a high quality job.

What recent tracks, assets or other things can I take a look at as an example of a well made track (to current AC standards). Especially regarding foliage, as I'll need to do that from scratch. Also terrain mapping/texturing will be something I want to look into

Also, it's taking ages for KsEditor to actually load the track, to the point I haven't succesfully loaded it as of yet. Is this a known issue? I'm currently working on it in Blender and everything seems to be fine there

 

[Beezer215]

Hi everyone, I've got a couple of questions regarding track modding. I just started a new project, and I'm looking to do a high quality job.

What recent tracks, assets or other things can I take a look at as an example of a well made track (to current AC standards). Especially regarding foliage, as I'll need to do that from scratch. Also terrain mapping/texturing will be something I want to look into

Also, it's taking ages for KsEditor to actually load the track, to the point I haven't succesfully loaded it as of yet. Is this a known issue? I'm currently working on it in Blender and everything seems to be fine there

Fat Alfie, Lilski, John R to name 3.
The Reboot guys right here in this forum are putting out some fairly passable stuff as well.

 

[Peugeot905]

Cockpit work on the MG-Lola EX257/Lola B01/60 thanks to @Kamil Cader

previous

 

[Vintagedriver]

Hi everyone, I've got a couple of questions regarding track modding. I just started a new project, and I'm looking to do a high quality job.

What recent tracks, assets or other things can I take a look at as an example of a well made track (to current AC standards). Especially regarding foliage, as I'll need to do that from scratch. Also terrain mapping/texturing will be something I want to look into

Also, it's taking ages for KsEditor to actually load the track, to the point I haven't succesfully loaded it as of yet. Is this a known issue? I'm currently working on it in Blender and everything seems to be fine there

You could also check this forum at https://assettocorsamods.net/forums/ most of the well know track modders seems to be active here.
Keep in you mint a few, I think easy to avoid, minor faults, even the best track maker do make them, but in VR mode a bit of an immersion breaker.

• 2D crowd & other 2D objects near the race track, or repeating the same 2D trees standing at a perfect straight line, parallel to the road.
• Using fences and power/telephone lines that producing lots of graphical artifacts.
• Mixing objects with, (I think its calling) differently resolution side by side. Especially noticed when it becomes to a create a distance mountain view or fuzzy rocky surface spots besides the road.
• Creating a object/ environment, with an unrealistic color and movement (like a lake or river) think then its better to skip that or change it into something different.

 

[Chris Goleado]

24 free street car mods released in February 2023 📁

 

[chas1723]

anyone else getting a Oulton Park update through content manager but it shows a file forbidden when I try to download it.

 

[Elio92]

Hi !

The fun fact about "Performance Delta" is… It’s the vanilla apps from AC ! ^^

So, about the RT Oulton Park v1.2 and my enigma, the mystery stills on my side.
I used the other versions of the track with some other cars and the problem about the first sector also appeared.

I repeat, with the v1.1 and the v1.0, no problem.

Cheers. ;-)

Hi Gentlemen !

The last version of "Oulton Park" by the Reboot Team (v1.4) solved my problem with the App performance delta on the first sector of the track.
Oulton Park (v1.4) by the Reboot Team

Thanks a lot again for all the people involved in.

Cheers !

@chas1723
It's a known problem, I gave the direct link in my post.

 

[Masscot]

anyone else getting a Oulton Park update through content manager but it shows a file forbidden when I try to download it.

As stated previously, just download the update from the original link.
The CUP update system can be problematic at the moment.

 

[DerLucky]

anyone else getting a Oulton Park update through content manager but it shows a file forbidden when I try to download it.

As stated previously, just download the update from the original link.
The CUP update system can be problematic at the moment.

As Masscot said. Right-clicking the proposed update in CM and then "Get Update" takes you to the link as well.