Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 147,952 comments
  • 44,217,411 views
That new Softlock in the latest CM works perfectly. I dialed up its Damper setting to 100 too and now it's practically exactly like hardware lock used to be before it stopped working with my wheel! Automatically locking the wheel to the car's authentic rotation is something every modern sim should have. Unfortunately, while it set the rotation right, AC's old softlock implementation didn't stop the wheel at the end, it applied a very off-putting knocking effect from the edge. To actually stop the wheel at the end (or rather apply max resistance there, but potato potato) I had to open G HUB and change the max rotation there whenever I switched to a car with different rotation. Very inconvenient. Well, no more! Now it's "set it and forget it".

Very happy about this addition!
 
Friedhelm
That new Softlock in the latest CM works perfectly. I dialed up its Damper setting to 100 too and now it's practically exactly like hardware lock used to be before it stopped working with my wheel! Automatically locking the wheel to the car's authentic rotation is something every modern sim should have. Unfortunately, while it set the rotation right, AC's old softlock implementation didn't stop the wheel at the end, it applied a very off-putting knocking effect from the edge. To actually stop the wheel at the end (or rather apply max resistance there, but potato potato) I had to open G HUB and change the max rotation there whenever I switched to a car with different rotation. Very inconvenient. Well, no more! Now it's "set it and forget it".

Very happy about this addition!
Click to expand...
Did u activate the AC's old softlock as well? I am still trying to play with the new csp soft lock settings so i can have 1080 rotation without problems.
 
Barry Sheene tribute helmet.

Screenshot_acso_ford_sierra_sapphire_lightning_rod_nrms_ipswich_27-3-123-0-22-27.jpg
Screenshot_acso_ford_sierra_sapphire_lightning_rod_nrms_ipswich_27-3-123-0-23-56.jpg
 
Goodnight. I would like a suggestion. Below is a print of "Driver_70" for the Mirage M6 and GR7.

In which "parameter", in the "Driver 3d" file of the "DATA" folder would I have to change to make the position of the hands more correct?
First, I'm using "animations" from Alfa T33TT12.

I would like the arms slightly more straight and the position of the right hand a little further out. In fact, I would also have to decrease the driver's "real size" slightly, but if I do that, the driver's position will be even worse.

I've been guarding it ever since.
 

Attachments

  • __custom_showroom_1682552410.png
    __custom_showroom_1682552410.png
    137.6 KB · Views: 21
  • __custom_showroom_1682552396.png
    __custom_showroom_1682552396.png
    127.5 KB · Views: 24
Peter Boese
Did you only install Pure, or also CM and CSP? If so how? and how did you install Pure?
Click to expand...
It's there now in weather fx.... Just dont see it listed in controllers in the weather setting in Drive... Just sol 2.4... Is that ok ?

Also, to answer your question I installed the latest CM and CSP, then also Pure via the install.exe :-)

TonyBarracuda
I think here are some true fans of classic japenese racing and Suzuka track, so...here we go with small update

Suzuka GP Circuit - inspited from 90's.
  • Took RT Suzuka as baseadded gravel traps in some corners (1st corner, Degner, Spoon Curve and 130R). Despite of Gran Turismo 4 version of Suzuka already had asphalt zone in 130R, if you check 1992 WSC video, it was gravel in early 90s...so i think it is even better.
  • Added tyres wall ahead of Casio triangle as it was in Gran Turismo 4.
  • Replaced some billboards adverts.
  • Moved pitwall making it shaped same as in Gran Turismo 4 and some other small changes.
  • It's standalone track, included City skyline by Nuvolari
If you use very clever Ai in assetto corsa for some reason for heavy metal racing for some racing, some Ai can crash to gravel now. need reduce their agression, or probably someone can do new Ai line for this version of the track

View attachment 1250121View attachment 1250122View attachment 1250123View attachment 1250124View attachment 1250125

Onboard preview
Click to expand...

HI, many thanks..... These Jiotta's are amazing.... One issue for me tho... Is there anyway to fix the blurry windscreens without me having to turn TAA off ???
 
SupremeGoku
It's there now in weather fx.... Just dont see it listed in controllers in the weather setting in Drive... Just sol 2.4... Is that ok ?

Also, to answer your question I installed the latest CM and CSP, then also Pure via the install.exe :-)


HI, many thanks..... These Jiotta's are amazing.... One issue for me tho... Is there anyway to fix the blurry windscreens without me having to turn TAA off ???
Click to expand...
Sol 2.4 is the one you want.
 
Problem: the AI of the car is so weak even on Kunos' tracks.

How can I improve?
Thanks a lot in advance!

[HEADER]
VERSION=3

[GEARS]
UP=10400
DOWN=7000
SLIP_THRESHOLD=1.1
GAS_CUTOFF_TIME=0.28

[PEDALS]
GASGAIN=2.0
BRAKE_HINT=0.9
TRAIL_HINT=0.29

[STEER]
STEER_GAIN=1.49

[LOOKAHEAD]
BASE=16.7



GAS_BRAKE_LOOKAHEAD=10
[ULTRA_GRIP]
VALUE=1.2
[PHYSICS_HINTS]
AERO_HINT=1
 
Good afternoon, I was trying to run the Hampton Downs National layout found on Breathes tracklist that has an unknown creator from Gutbomb. I am able to load the international layout but when I try to load the national or club layout Assetto Corsa crashes. I am wondering if anybody is able to assist with any of the 3 questions;

1. Is anybody else having this issue?
2. Does anybody know potential errors that might cause this?
3. Does somebody know how to fix any potential errors?

I would be extremely grateful if somebody were able to help, Cheers!
 
HoodlumRS
Good afternoon, I was trying to run the Hampton Downs National layout found on Breathes tracklist that has an unknown creator from Gutbomb. I am able to load the international layout but when I try to load the national or club layout Assetto Corsa crashes. I am wondering if anybody is able to assist with any of the 3 questions;

1. Is anybody else having this issue?
2. Does anybody know potential errors that might cause this?
3. Does somebody know how to fix any potential errors?

I would be extremely grateful if somebody were able to help, Cheers!
Click to expand...
Same here.
 
HoodlumRS
Good afternoon, I was trying to run the Hampton Downs National layout found on Breathes tracklist that has an unknown creator from Gutbomb. I am able to load the international layout but when I try to load the national or club layout Assetto Corsa crashes. I am wondering if anybody is able to assist with any of the 3 questions;

1. Is anybody else having this issue?
2. Does anybody know potential errors that might cause this?
3. Does somebody know how to fix any potential errors?

I would be extremely grateful if somebody were able to help, Cheers!
Click to expand...
I just checked the "hampton_downs" you mention (which was not in the list - I added it).
After comparing the files, in my opinion, it is a version of Neil Shaw but released a month earlier than "hampton_downs_motorsport_park".
 
Nuck Chorris
Hey, RainMaker... I've downloaded your F1 73 real skins + AI fix... All the cars are now with with standard setup for wet, is this normal?
Thanks!
Click to expand...
Yes the wets are mandatory for SimDream mods. That does not effect the AI. My fix should solve the slow AI issue. Is the AI gererally slow like before the fix or just on some tracks? More than the full Kunos car speed I cant give you. Thats what I actually did with the fix.
 
Last edited:
MrLonguinha17
Goodnight. I would like a suggestion. Below is a print of "Driver_70" for the Mirage M6 and GR7.

In which "parameter", in the "Driver 3d" file of the "DATA" folder would I have to change to make the position of the hands more correct?
First, I'm using "animations" from Alfa T33TT12.

I would like the arms slightly more straight and the position of the right hand a little further out. In fact, I would also have to decrease the driver's "real size" slightly, but if I do that, the driver's position will be even worse.

I've been guarding it ever since.
Click to expand...
For what I know, that would mean re-doing the animation. You can move/rotate/scale the driver to your taste in CM to accomodate your needs but if you want another "hand location" based on the body, you may need a new animation. Try finding a more fitting one, maybe ? From what I see, I think upscaling a bit the driver could do the trick. If not, there is surely some other 70's prototype with that type of seat/wheel displacement available

@Nuck Chorris +1, If anyone knows a bit about that I would love to learn a thing or 2 about that file
 
MrLonguinha17
Soon, I hope to share this and all the other versions of the Matra (which were textured by a friend of ours).

Now they have better brightness and shadows.

The Mirage, I'm redoing the M6 and GR7 again (here the versions from Brands Hatch '74 and Le Mans '73, without any treatment in the textures, brightness and shadows).

I hope our friend can do the same with them ( as well as the GR8 versions ( which I spent last week ) and later when I finish the M9 and M10 ), maybe he can do the Mirage-BRM versions ( 1969, open and closed ) and maybe the Daytona '73 version.
Let's see what I can get (added and swapping parts).
Click to expand...
actually, I have never seen a download link for any of these cars.

Am I missing something? Maybe Im wrong and just dont know what im looking for in my archives
 
Last edited:
Nuck Chorris
Problem: the AI of the car is so weak even on Kunos' tracks.

How can I improve?
Thanks a lot in advance!

[HEADER]
VERSION=3

[GEARS]
UP=10400
DOWN=7000
SLIP_THRESHOLD=1.1
GAS_CUTOFF_TIME=0.28

[PEDALS]
GASGAIN=2.0
BRAKE_HINT=0.9
TRAIL_HINT=0.29

[STEER]
STEER_GAIN=1.49

[LOOKAHEAD]
BASE=16.7



GAS_BRAKE_LOOKAHEAD=10
[ULTRA_GRIP]
VALUE=1.2
[PHYSICS_HINTS]
AERO_HINT=1
Click to expand...
1. Depending on the car spec, you can reduce the GAS_CUTOFF_TIME. For example if the car has a x-trac sequential then set to 0.1. Manual trans more like 0.2 or more.
2. Increase the BRAKE_HINT. Try 0.93. If still not braking late enough then 0.97 or 1.0. If they start crashing then reduce.
3. GAS_BRAKE_LOOKAHEAD can be 0 for the fastest but if they crash then try 3.
4. AERO_HINT can be increased to 1.2 to help with corner speed.
5. ULTRA_GRIP. I found when set to more then 1.0 can actually slow the AI down so you can also experiment with this setting.
 
raggetheman
This seems like a good idea!

Also can you look in to when you drive in dry weather and it starts to drizzel it becomes very slippery even at like 2% wetness? I drove a Porsche 908lh on Vintage tires at Le Mans and it started to drizzel and the car spun out on the straight.
Click to expand...
Just use the difficulty slider in Sol Planner. I'm tired of talking about that. Please contact JPG_18, the creator of the physics if you are not satisfied with it. But actually the behavior of the physics is meant to be so. Thats why i added a slider, which reduces the wetness and therefore the slip.
 
Last edited:
Rainmaker87
Very good news for GPL lovers!​

In short: 2 big 60s track updates incoming, a leaked 60s track and one fix for F1 1967 cars

Sergio Loro gave me permission for the short Finnish track I mentioned earlier. Elaintarharata will be released later this week.

View attachment 1250956

To start with the updates here is a fix for the Bazza GPL Mod, that repairs the broken automatic shifting. Get the mod here and read the instructions carefully to get the Lotus and Ferrari running: https://thracing.de/gpl-mod-1967/

www.mediafire.com

GPL-Mod 1967 (Bazza) automatic shifting fix by Rainmaker

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

Car testing one the second track project we are working on.

View attachment 1250955

The third track is a find on Breaths track list. There you can search the Sachsenring 1967 mod made by me for privat use and sharing with friends. Someone leaked it and made some nice CSP updates of the track. If you want to test it you can find it in Breaths list.

That's it for today!

BTW: How many times did you tried to read Elaintarharata correctly?
Click to expand...
Sachsenring 67? Now you got me. Thought Gunnar is working on a scratch-made one? Can you share some more infos please in regards to your updated version as above written?
 
@Rainmaker87 just seen some of your AI updates that I'd missed in your folder - thanks for these!

Fall Guy
Sachsenring 67? Now you got me. Thought Gunnar is working on a scratch-made one? Can you share some more infos please in regards to your updated version as above written?
Click to expand...

Gunnar is working on a scratch vintage one? I'd not heard that, would be (pleasantly) surprised
 
Last edited:
Baiano
Ticked or not didn't feel anything different though 🙂
Click to expand...
The way I understand it, the new settings under "FFB Tweaks -> Custom softlock" only change how the softlock "stops" the wheel.

If you have problems with using the right rotation for a specific car, or getting AC to recognize your wheel's max rotation, or can't make the virtual wheel animation match your physical wheel, those are different issues. I think.
 
So this is a first for me... CM only shows the DRIVE and ABOUT menus, nothing else. I tried backing up to previous versions of CM and CSP, to no avail. Anyone seen this? Better still, know a way out of this? Is this the beginning of a holiday away from AC?

CM-bent-01.jpg


RECOVERED: Restored an old copy of the AcTools Content Manager directory. Now working.
 
Last edited:
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Famine
Assetto Corsa EVO Early Access Discussion Thread
24 25 26
Replies
761
Views
153K
graveltrap
graveltrap
Terronium-12
Assetto Corsa EVO Update 0.3 Now Available in “Open” Beta Test Branch
2
Replies
33
Views
7K
Cote Dazur
Cote Dazur
S
Logitech G Pro wheel settings Assetto Corsa
Replies
0
Views
4K
Shah1
S
OH1955
  • Question Question
Anybody got Oakes Field (Nassau) for Assetto Corsa?
Replies
5
Views
9K
OH1955
OH1955
Famine
Assetto Corsa Competizione Ultimate Edition Now Available on Steam
Replies
8
Views
9K
Apocalypse211
Apocalypse211

Latest Posts

Back