Assetto Corsa PC Mods General DiscussionPC

[Badgerman]

It's there now in weather fx.... Just dont see it listed in controllers in the weather setting in Drive... Just sol 2.4... Is that ok ?

Also, to answer your question I installed the latest CM and CSP, then also Pure via the install.exe :-)


HI, many thanks..... These Jiotta's are amazing.... One issue for me tho... Is there anyway to fix the blurry windscreens without me having to turn TAA off ???

Sol 2.4 is the one you want.

 

[Friedhelm]

Did u activate the AC's old softlock as well? I am still trying to play with the new csp soft lock settings so i can have 1080 rotation without problems.

Yes, I left that ticked.

 

[SupremeGoku]

Sol 2.4 is the one you want.

Thanks

 

[Nuck Chorris]

Problem: the AI of the car is so weak even on Kunos' tracks.

How can I improve?
Thanks a lot in advance!

[HEADER]
VERSION=3

[GEARS]
UP=10400
DOWN=7000
SLIP_THRESHOLD=1.1
GAS_CUTOFF_TIME=0.28

[PEDALS]
GASGAIN=2.0
BRAKE_HINT=0.9
TRAIL_HINT=0.29

[STEER]
STEER_GAIN=1.49

[LOOKAHEAD]
BASE=16.7



GAS_BRAKE_LOOKAHEAD=10
[ULTRA_GRIP]
VALUE=1.2
[PHYSICS_HINTS]
AERO_HINT=1

 

[HoodlumRS]

Good afternoon, I was trying to run the Hampton Downs National layout found on Breathes tracklist that has an unknown creator from Gutbomb. I am able to load the international layout but when I try to load the national or club layout Assetto Corsa crashes. I am wondering if anybody is able to assist with any of the 3 questions;

1. Is anybody else having this issue?
2. Does anybody know potential errors that might cause this?
3. Does somebody know how to fix any potential errors?

I would be extremely grateful if somebody were able to help, Cheers!

 

[mrtomcat66]

Good afternoon, I was trying to run the Hampton Downs National layout found on Breathes tracklist that has an unknown creator from Gutbomb. I am able to load the international layout but when I try to load the national or club layout Assetto Corsa crashes. I am wondering if anybody is able to assist with any of the 3 questions;

1. Is anybody else having this issue?
2. Does anybody know potential errors that might cause this?
3. Does somebody know how to fix any potential errors?

I would be extremely grateful if somebody were able to help, Cheers!

Same here.

 

[Breathe]

Good afternoon, I was trying to run the Hampton Downs National layout found on Breathes tracklist that has an unknown creator from Gutbomb. I am able to load the international layout but when I try to load the national or club layout Assetto Corsa crashes. I am wondering if anybody is able to assist with any of the 3 questions;

1. Is anybody else having this issue?
2. Does anybody know potential errors that might cause this?
3. Does somebody know how to fix any potential errors?

I would be extremely grateful if somebody were able to help, Cheers!

I just checked the "hampton_downs" you mention (which was not in the list - I added it).
After comparing the files, in my opinion, it is a version of Neil Shaw but released a month earlier than "hampton_downs_motorsport_park".

 

[Pfalzdriver]

Hi folks does photo mode appear broken now since the new csp and content manager?

No, but you need to disable some stuff if its enabled at your system.

Graphic Adjustments: FSR -> Disable for screenshots
ReflectionFX: Disable "Shot cubemap around ...."

 

[Rainmaker87]

Hey, RainMaker... I've downloaded your F1 73 real skins + AI fix... All the cars are now with with standard setup for wet, is this normal?
Thanks!

Yes the wets are mandatory for SimDream mods. That does not effect the AI. My fix should solve the slow AI issue. Is the AI gererally slow like before the fix or just on some tracks? More than the full Kunos car speed I cant give you. Thats what I actually did with the fix.

 

[Alguecool]

Goodnight. I would like a suggestion. Below is a print of "Driver_70" for the Mirage M6 and GR7.

In which "parameter", in the "Driver 3d" file of the "DATA" folder would I have to change to make the position of the hands more correct?
First, I'm using "animations" from Alfa T33TT12.

I would like the arms slightly more straight and the position of the right hand a little further out. In fact, I would also have to decrease the driver's "real size" slightly, but if I do that, the driver's position will be even worse.

I've been guarding it ever since.

For what I know, that would mean re-doing the animation. You can move/rotate/scale the driver to your taste in CM to accomodate your needs but if you want another "hand location" based on the body, you may need a new animation. Try finding a more fitting one, maybe ? From what I see, I think upscaling a bit the driver could do the trick. If not, there is surely some other 70's prototype with that type of seat/wheel displacement available

@Nuck Chorris +1, If anyone knows a bit about that I would love to learn a thing or 2 about that file

 

[RMi_wood]

Soon, I hope to share this and all the other versions of the Matra (which were textured by a friend of ours).

Now they have better brightness and shadows.

The Mirage, I'm redoing the M6 and GR7 again (here the versions from Brands Hatch '74 and Le Mans '73, without any treatment in the textures, brightness and shadows).

I hope our friend can do the same with them ( as well as the GR8 versions ( which I spent last week ) and later when I finish the M9 and M10 ), maybe he can do the Mirage-BRM versions ( 1969, open and closed ) and maybe the Daytona '73 version.
Let's see what I can get (added and swapping parts).

actually, I have never seen a download link for any of these cars.

Am I missing something? Maybe Im wrong and just dont know what im looking for in my archives

 

[Fullnoise]

Problem: the AI of the car is so weak even on Kunos' tracks.

How can I improve?
Thanks a lot in advance!

[HEADER]
VERSION=3

[GEARS]
UP=10400
DOWN=7000
SLIP_THRESHOLD=1.1
GAS_CUTOFF_TIME=0.28

[PEDALS]
GASGAIN=2.0
BRAKE_HINT=0.9
TRAIL_HINT=0.29

[STEER]
STEER_GAIN=1.49

[LOOKAHEAD]
BASE=16.7



GAS_BRAKE_LOOKAHEAD=10
[ULTRA_GRIP]
VALUE=1.2
[PHYSICS_HINTS]
AERO_HINT=1

1. Depending on the car spec, you can reduce the GAS_CUTOFF_TIME. For example if the car has a x-trac sequential then set to 0.1. Manual trans more like 0.2 or more.
2. Increase the BRAKE_HINT. Try 0.93. If still not braking late enough then 0.97 or 1.0. If they start crashing then reduce.
3. GAS_BRAKE_LOOKAHEAD can be 0 for the fastest but if they crash then try 3.
4. AERO_HINT can be increased to 1.2 to help with corner speed.
5. ULTRA_GRIP. I found when set to more then 1.0 can actually slow the AI down so you can also experiment with this setting.

 

[Valexdrift]

BMW GC10, never heard of it before, a good old fashioned silhouette racer with a lovely butt....

Had anyone every heard of this car?

View attachment 1250450View attachment 1250451

I think raceroom hase a couple of fictional cars based on this one

 

[Peter Boese]

This seems like a good idea!

Also can you look in to when you drive in dry weather and it starts to drizzel it becomes very slippery even at like 2% wetness? I drove a Porsche 908lh on Vintage tires at Le Mans and it started to drizzel and the car spun out on the straight.

Just use the difficulty slider in Sol Planner. I'm tired of talking about that. Please contact JPG_18, the creator of the physics if you are not satisfied with it. But actually the behavior of the physics is meant to be so. Thats why i added a slider, which reduces the wetness and therefore the slip.

 

[Baiano]

Yes, I left that ticked.

Ticked or not didn't feel anything different though 🙂

 

[Fall Guy]

Very good news for GPL lovers!​

In short: 2 big 60s track updates incoming, a leaked 60s track and one fix for F1 1967 cars

Sergio Loro gave me permission for the short Finnish track I mentioned earlier. Elaintarharata will be released later this week.

View attachment 1250956

To start with the updates here is a fix for the Bazza GPL Mod, that repairs the broken automatic shifting. Get the mod here and read the instructions carefully to get the Lotus and Ferrari running: https://thracing.de/gpl-mod-1967/

GPL-Mod 1967 (Bazza) automatic shifting fix by Rainmaker

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Car testing one the second track project we are working on.

View attachment 1250955

The third track is a find on Breaths track list. There you can search the Sachsenring 1967 mod made by me for privat use and sharing with friends. Someone leaked it and made some nice CSP updates of the track. If you want to test it you can find it in Breaths list.

That's it for today!

BTW: How many times did you tried to read Elaintarharata correctly?

Sachsenring 67? Now you got me. Thought Gunnar is working on a scratch-made one? Can you share some more infos please in regards to your updated version as above written?

 

[Rodger Davies]

@Rainmaker87 just seen some of your AI updates that I'd missed in your folder - thanks for these!

Sachsenring 67? Now you got me. Thought Gunnar is working on a scratch-made one? Can you share some more infos please in regards to your updated version as above written?

Gunnar is working on a scratch vintage one? I'd not heard that, would be (pleasantly) surprised

 

[Rainmaker87]

Jep Gunnar is working on a scratch made version. This may could take a while. The old leaked track is a conversion of the rF track, that is a conversion of an old GPL track by Andre Streu released in 2002. So no eye candy but it will do it for some laps.

 

[Friedhelm]

Ticked or not didn't feel anything different though 🙂

The way I understand it, the new settings under "FFB Tweaks -> Custom softlock" only change how the softlock "stops" the wheel.

If you have problems with using the right rotation for a specific car, or getting AC to recognize your wheel's max rotation, or can't make the virtual wheel animation match your physical wheel, those are different issues. I think.

 

[lorelord]

ignore fixed it

 

[fnntrvrt]

Porsche 963 V1.11 is now online. Grip values has been restored.

[PHYSICS] Porsche 963

Meant to replace the data for the Porsche 963 by SDD TG Physics have been reworked to the best of my ability given the sources available. Reworked: Torque Curve - 520kW@8000 8158rpm Engine.ini ERS Aero etc... Help on the following would be...

www.racedepartment.com

 

[TURBOMATIZ]

No, but you need to disable some stuff if its enabled at your system.

Graphic Adjustments: FSR -> Disable for screenshots
ReflectionFX: Disable "Shot cubemap around ...."

Hi Pfalzdriver have you tried motion shot yet its totally broken ?

 

[Rainmaker87]

Does someone also had the issue that in Content Manager the Geo Tags don't work?

Some more GPLmania for AC from Jake here, he used Sergios Zandvoort with my AI lines.

 

[sab001]

So this is a first for me... CM only shows the DRIVE and ABOUT menus, nothing else. I tried backing up to previous versions of CM and CSP, to no avail. Anyone seen this? Better still, know a way out of this? Is this the beginning of a holiday away from AC?

RECOVERED: Restored an old copy of the AcTools Content Manager directory. Now working.

 

[Breathe]

Does someone also had the issue that in Content Manager the Geo Tags don't work?View attachment 1251387

Sometimes, I have the same as you.
But not today

 

[Cozy61]

Toyota SF-R Cup Mod Updated​

The car has been updated and can be found here for free - https://www.patreon.com/guerilla

Great work by the team and still fun to drive around street circuits. All my previous 'Around the World' Skins and Custom Championship still work.

Championship: https://www.racedepartment.com/down...exciting-guerilla-mods-toyota-s-fr-car.40078/


Skins: https://www.racedepartment.com/downloads/guerilla-mod-toyota_s-fr-cup-round-the-world-skins.39857/

Toyota SF-R Cup
v. 1.0
Made by GUERILLA Mods
3D / Shaders: Timo Hartmann, Marcel Erner
Physics / BOP: Timo Hartmann + Immanuel Vinke
Extension / Textures: Marcel Erner
Sound / Management: Timo Hartmann
Custom shader patch 1.76 or above required!
Changelog 1.0:

• new interior
• reworked exterior
• reworked rims, tyres & brake discs
• new exterior carbon UV map
• reworked headlights
• reworked taillights
• new internal/external windows (rainFX)
• wiper animation - new driver animation
• reworked windshield banner
• new shader settings
• new extension config (new light settings incl.)
• reworked physics
• reworked all included skins
• two new skins

 

[Pfalzdriver]

Hi Pfalzdriver have you tried motion shot yet its totally broken ?

Ouch. Looks like 💩
TBH, I've never used it before.

 

[Badgerman]

So this is a first for me... CM only shows the DRIVE and ABOUT menus, nothing else. I tried backing up to previous versions of CM and CSP, to no avail. Anyone seen this? Better still, know a way out of this? Is this the beginning of a holiday away from AC?

View attachment 1251395

Go to Content manager - settings - appearance. Down on the lower left you can check off what you want displayed. Hopefully that's the only thing going on. I installed the new version of CM the other day and a lot of my settings disappeared.

 

[sab001]

Go to Content manager - settings - appearance. Down on the lower left you can check off what you want displayed. Hopefully that's the only thing going on. I installed the new version of CM the other day and a lot of my settings disappeared.

Except I had no settings menu. A restore of an old version of CM fixed it.

 

[Masscot]

edit: you now can do your own customs previews with latest CSP for encrypted cars, meaning the blue crystals won´t show up any longer. Just enable "use CSP for final preview render" in settings --> content manager --> custom showroom and then click on update previews as usual. AC now starts in the background and generates the preview with the formerly used one. Great!

A long awaited feature and seems to work OK, albeit slowly.... but, my custom previews done this way are all vastly overexposed.
Ideas welcome..?