Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 156,647 comments
  • 50,710,432 views
Vintagedriver
As an collector of the old stuff, is this the same car as can be found, but now being deleted on RD?

Cars - CD SP 66 Peugeot

kalRcLevi1 submitted a new resource: CD SP 66 Peugeot - Peugeot CD SP 66 from LeMans 1966-67 I created the Peugeot CD SP 66 race car from 1966 an 1967. Read more about this resource...
www.racedepartment.com www.racedepartment.com


edit: Never mind also on ACTK site

Garage ACTK

Assetto Corsa modding page
www.assetto-fr.tk
Click to expand...

Rainmaker87
The ACTK version has a different interior from a Porsche.
Click to expand...
Well, ACTK did improve the car, the rev counter numbers are now visible.
 
Perico Lospa
YouTube is your friend! 😉
Click to expand...
As I said, I've watched a bunch of videos on Youtube. But I've seen conflicting way to add mods which was confusing me. I'm brand new to all of this PC stuff especially mods. I've tried some mods on Automobilista 2 and they have crashed the game so I want to try and avoid that with AC.
 
Perico Lospa
Gang of hooligans! No one takes this forum seriously... And now, I add my advice...
Click to expand...
What a friendly bunch you guys are, no help at all...Try this...
defogger.PNG
 
Jezza819
As I said, I've watched a bunch of videos on Youtube. But I've seen conflicting way to add mods which was confusing me. I'm brand new to all of this PC stuff especially mods. I've tried some mods on Automobilista 2 and they have crashed the game so I want to try and avoid that with AC.
Click to expand...
I dont recommend using the drag n drop to CM to install mods, not all mods are compatible with that way of installing.
Open the archive (zip, rar, whatever it is) and check the folder structure inside. Some mods have the paths already mapped out, so you only need to drag what is inside, to the assettocorsa folder, where you installed it, not the one in documents.
if the folder in the archive is only the name of the car (or track) extract (drag n drop) to the cars (or track) folder. The default path where AC is installed is usually C:\Steam\steamapps\common\assettocorsa so cars would go into C:\Steam\steamapps\common\assettocorsa\content\cars\ replace cars with tracks for tracks. Other mods have files that are required, such as fonts, etc. Those usually have the content folder in the archive.
Checking the structure inside the archive is your best way of avoiding any problems. Ive seen cars and tracks released where there is a folder called xxcar v2.1 (as an example), then inside that is the file called xxcar. rule of thumb with cars and tracks, the folder with the car name should have the *.kn5 files and other folders like animation, extension, skins, texture, sfx, ui and maybe data (if no data there is likely to be a file called data.acd) if in this case you put the folder xxcar v2.1 into the cars folder, you will get errors. you would need to take the subfolder and contents and paste them into the cars folder so you would have xxcar in the cars folder. Check the folder structure of default cars in the cars folder to see what I mean. Tracks is the same.

I have found often that youtube videos can be confusing when you are new. I had problems installing SOL after watching you tube. If the mod has a readme, you are better served reading that first.
 
SthrnOldskool
I dont recommend using the drag n drop to CM to install mods, not all mods are compatible with that way of installing.
Open the archive (zip, rar, whatever it is) and check the folder structure inside. Some mods have the paths already mapped out, so you only need to drag what is inside, to the assettocorsa folder, where you installed it, not the one in documents.
if the folder in the archive is only the name of the car (or track) extract (drag n drop) to the cars (or track) folder. The default path where AC is installed is usually C:\Steam\steamapps\common\assettocorsa so cars would go into C:\Steam\steamapps\common\assettocorsa\content\cars\ replace cars with tracks for tracks. Other mods have files that are required, such as fonts, etc. Those usually have the content folder in the archive.
Checking the structure inside the archive is your best way of avoiding any problems. Ive seen cars and tracks released where there is a folder called xxcar v2.1 (as an example), then inside that is the file called xxcar. rule of thumb with cars and tracks, the folder with the car name should have the *.kn5 files and other folders like animation, extension, skins, texture, sfx, ui and maybe data (if no data there is likely to be a file called data.acd) if in this case you put the folder xxcar v2.1 into the cars folder, you will get errors. you would need to take the subfolder and contents and paste them into the cars folder so you would have xxcar in the cars folder. Check the folder structure of default cars in the cars folder to see what I mean. Tracks is the same.

I have found often that youtube videos can be confusing when you are new. I had problems installing SOL after watching you tube. If the mod has a readme, you are better served reading that first.
Click to expand...
Thanks. Opening the archive is something else I'm questioning. I have win rar for those types of files but that's all I have. Do you need to have the particular tool to unzip the folder in order to look inside of it if it's not just a regular zip file? The two mods I got for AMS2 that worked were both rar files. Each of the ones that crashed the game were hosted by some other file host that I don't have their unzip tool and I'm wondering if that's what caused the crash.
 
Jezza819
Thanks. Opening the archive is something else I'm questioning. I have win rar for those types of files but that's all I have. Do you need to have the particular tool to unzip the folder in order to look inside of it if it's not just a regular zip file? The two mods I got for AMS2 that worked were both rar files. Each of the ones that crashed the game were hosted by some other file host that I don't have their unzip tool and I'm wondering if that's what caused the crash.
Click to expand...
Some mods are archived in "7zip" you can download 7zip for free. It maybe easier for you to create a "ACMod" or whatever folder in your desktop. Extract the files to this folder, then you can examine the folder contents.

Don't worry you'll get the hang of it in no time. It's an exciting journey but could lead to severe addiction. You've been warned!
 
Last edited:
Jezza819
Thanks. Opening the archive is something else I'm questioning. I have win rar for those types of files but that's all I have. Do you need to have the particular tool to unzip the folder in order to look inside of it if it's not just a regular zip file? The two mods I got for AMS2 that worked were both rar files. Each of the ones that crashed the game were hosted by some other file host that I don't have their unzip tool and I'm wondering if that's what caused the crash.
Click to expand...
Ive always opened the zip, rar or 7zip files in winrar, I dont use anything else, though I have 7zip installed, I find winrar easier.
It should be all you need to open the files you download that are a complete mod. If the file is a .kn5 file, you dont want to get into opening those, thats an entirely different kettle of fish, and we wont go into confusing you more with that.
Ive never looked at AMS or AMS2 mods, so I cant compare to those games.
 
Last edited:
DaBaeda
Reworked Texas World Speedway Track from Legion (9 layouts)
Added GrassFX, Balloons, Blimp and Helis from Masscot, New Cameras
Have Fun
DaBaeda
Download:
Click to expand...


Does anyone know where the original files are for this track (Texas World Speedway)? I cannot find them anywhere. Thanks! I get the error message "track not found". I noticed all the other tracks have a data file, which was not included with this download. I only want the original files so the track will load.
 
Last edited:
@RMi_wood's random CSP tip #437

Remember kids, ext_config.ini is read hiarchaly top to bottom

therefore:
[SHADER_REPLACEMENT_...]
ACTIVE= 0
MATERIALS= your_material
PROP_... = ksAmbient, 0.22
PROP_... = ksDiffuse, 0.21

[SHADER_REPLACEMENT_...]
ACTIVE= 1
MATERIALS= your_material
PROP_... = ksAmbient, 0.22
PROP_... = ksDiffuse, 0.21

is not the same as:
[SHADER_REPLACEMENT_...]
ACTIVE= 1
MATERIALS= your_material
PROP_... = ksAmbient, 0.22
PROP_... = ksDiffuse, 0.21

[SHADER_REPLACEMENT_...]
ACTIVE= 0
MATERIALS= your_material
PROP_... = ksAmbient, 0.22
PROP_... = ksDiffuse, 0.21

* a very simplistic example
 
Last edited:
SthrnOldskool
Ive always opened the zip, rar or 7zip files in winrar, I dont use anything else, though I have 7zip installed, I find winrar easier.
It should be all you need to open the files you download that are a complete mod. If the file is a .kn5 file, you dont want to get into opening those, thats an entirely different kettle of fish, and we wont go into confusing you more with that.
Ive never looked at AMS or AMS2 mods, so I cant compare to those games.
Click to expand...
While I'm asking questions, you don't know how to fix this do you?



I'm playing on a 55 inch tv and all of the menus are incredibly small. I did figure out how to get the main game menu enlarged but everything else is on the HUD and the setup menus are tiny.
 
GT3Masters97
I tried the rolling start app. Technically it works, the point is that at the start some cars remain stationary on the grid causing crashes (and those behind flashing / honking their horn). In practice it becomes unusable, also because when someone manages to wriggle free from the accident he doesn't join the others but stays behind :irked:
Click to expand...
Perico Lospa
Yes, sounds promissing, but...

Click to expand...

The rolling start mod is working on simple circuits like the Indy 1966 oval. Maybe at more complex circuits like SPA, its were the mod shows its limitations .
From what I think should be improved, middle in the rolling start there is a point were you can raise your speed, think here the mod does do a recalculate for the second half of the 2 rounds.
Despite the video is showing a side by site rolling start in a very disciplined order, in my case its like all cars are always trying to have an position behind each other’s. BTW, I used the out of the box settings.
Would also like to see a safety car in this mod.
I did this test using 25 vintage Indy cars on the Indianapolis ‘66 circuit while I was at the 23 position, I did not noticed any car not starting or have seen collisions, during the rolling start. Maybe there is a limitation on the amount of cars to doing the AI calculations.

Rolling start mod is not perfect, yep it needs some improvements and I guess only for simple oval circuits its a nice addition. In my case, until nothing better is being released this mod is a stayer on my SSD.

Edit, I did do this in the Surfaces.ini file: “changed the original WAV_PITCH= to WAV_PITCH=extended-0 rather than add a new line WAV_PITCH=extended-0 at the end” as been published in the txt file. Maybe here I did introduce a different behavior, please correct me and let me know if this is true.
 
Last edited:
RMi_wood
@RMi_wood's random CSP tip #437

Remember kids, ext_config.ini is read hiarchaly top to bottom

therefore:
[SHADER_REPLACEMENT_...]
ACTIVE= 0
MATERIALS= your_material
PROP_... = ksAmbient, 0.22
PROP_... = ksDiffuse, 0.21

[SHADER_REPLACEMENT_...]
ACTIVE= 1
MATERIALS= your_material
PROP_... = ksAmbient, 0.22
PROP_... = ksDiffuse, 0.21

is not the same as:
[SHADER_REPLACEMENT_...]
ACTIVE= 1
MATERIALS= your_material
PROP_... = ksAmbient, 0.22
PROP_... = ksDiffuse, 0.21

[SHADER_REPLACEMENT_...]
ACTIVE= 0
MATERIALS= your_material
PROP_... = ksAmbient, 0.22
PROP_... = ksDiffuse, 0.21

* a very simplistic example
Click to expand...

Facepalm moment in my house this morning
 
Jezza819
While I'm asking questions, you don't know how to fix this do you?



I'm playing on a 55 inch tv and all of the menus are incredibly small. I did figure out how to get the main game menu enlarged but everything else is on the HUD and the setup menus are tiny.
Click to expand...
Content Manager would help, I think the Vanilla launcher doesnt support higher resolution than 1080
 
Vintagedriver
The rolling start mod is working on simple circuits like the Indy 1966 oval. Maybe at more complex circuits like SPA, its were the mod shows its limitations .
From what I think should be improved, middle in the rolling start there is a point were you can raise your speed, think here the mod does do a recalculate for the second half of the 2 rounds.
Despite the video is showing a side by site rolling start in a very disciplined order, in my case its like all cars are always trying to have an position behind each other’s. BTW, I used the out of the box settings.
Would also like to see a safety car in this mod.
I did this test using 25 vintage Indy cars on the Indianapolis ‘66 circuit while I was at the 23 position, I did not noticed any car not starting or have seen collisions, during the rolling start. Maybe there is a limitation on the amount of cars to doing the AI calculations.

Rolling start mod is not perfect, yep it needs some improvements and I guess only for simple oval circuits its a nice addition. In my case, until nothing better is being released this mod is a stayer on my SSD.

Edit, I did do this in the Surfaces.ini file: “changed the original WAV_PITCH= to WAV_PITCH=extended-0 rather than add a new line WAV_PITCH=extended-0 at the end” as been published in the txt file. Maybe here I did introduce a different behavior, please correct me and let me know if this is true.
Click to expand...
I have to uninstall it too for now. To be honest, I'm more annoyed by the fact that the AI stalls at the start and stays there forever, which I've never been able to fix (which doesn't depend on the app itself). Another thing that I hope will be implemented in the future is to apply the rolling start in the same way that the csp applies the rain tires, without changing anything in the files but automatically. I can't deny that I think this app is a game-changer with a lot of potential, especially for those who like me often race offline.
 
I have tried to use [MODEL_REPLACEMENT] CSP function to change wheels but sometimes I have new wheels bigger than expected or not really in the perfect place (too much out or into the body).
Is it possible to fix size of the wheel or the position of the wheel into config file ? or maybe in Data ? and how ?

Thanks

EDIT : I have tried to use SCALE and OFFSET paramters like in this but without success (any change ingame) :
github.com

General – Model replacements

Configuration files for Assetto Corsa Custom Shaders Patch - ac-custom-shaders-patch/acc-extension-config
github.com github.com
 
Last edited:
GT3Masters97
I have to uninstall it too for now. To be honest, I'm more annoyed by the fact that the AI stalls at the start and stays there forever, which I've never been able to fix (which doesn't depend on the app itself). Another thing that I hope will be implemented in the future is to apply the rolling start in the same way that the csp applies the rain tires, without changing anything in the files but automatically. I can't deny that I think this app is a game-changer with a lot of potential, especially for those who like me often race offline.
Click to expand...
That’s why I did start in the back of the grid to get a good overview on what’s happen. In my case no car did stall, all cars did move and none did collided to a wall or another car. It could be its the type of (simple oval) circuit, CSP version depending, a AI setting in CM, or the WAV_PITCH=extended-0 (overwrite or extra) in surface.ini. I’m absolutely not a guy with knowledge on that point, I’m only a user.
 
Last edited:
GT3Masters97
I have to uninstall it too for now. To be honest, I'm more annoyed by the fact that the AI stalls at the start and stays there forever, which I've never been able to fix (which doesn't depend on the app itself). Another thing that I hope will be implemented in the future is to apply the rolling start in the same way that the csp applies the rain tires, without changing anything in the files but automatically. I can't deny that I think this app is a game-changer with a lot of potential, especially for those who like me often race offline.
Click to expand...
A potential that won't be fulfilled by the author, he does not intent to work on this any longer, hopefully someone else can keep improving it.
 
Vintagedriver
The rolling start mod is working on simple circuits like the Indy 1966 oval. Maybe at more complex circuits like SPA, its were the mod shows its limitations .
From what I think should be improved, middle in the rolling start there is a point were you can raise your speed, think here the mod does do a recalculate for the second half of the 2 rounds.
Despite the video is showing a side by site rolling start in a very disciplined order, in my case its like all cars are always trying to have an position behind each other’s. BTW, I used the out of the box settings.
Would also like to see a safety car in this mod.
I did this test using 25 vintage Indy cars on the Indianapolis ‘66 circuit while I was at the 23 position, I did not noticed any car not starting or have seen collisions, during the rolling start. Maybe there is a limitation on the amount of cars to doing the AI calculations.

Rolling start mod is not perfect, yep it needs some improvements and I guess only for simple oval circuits its a nice addition. In my case, until nothing better is being released this mod is a stayer on my SSD.

Edit, I did do this in the Surfaces.ini file: “changed the original WAV_PITCH= to WAV_PITCH=extended-0 rather than add a new line WAV_PITCH=extended-0 at the end” as been published in the txt file. Maybe here I did introduce a different behavior, please correct me and let me know if this is true.
Click to expand...

GT3Masters97
I have to uninstall it too for now. To be honest, I'm more annoyed by the fact that the AI stalls at the start and stays there forever, which I've never been able to fix (which doesn't depend on the app itself). Another thing that I hope will be implemented in the future is to apply the rolling start in the same way that the csp applies the rain tires, without changing anything in the files but automatically. I can't deny that I think this app is a game-changer with a lot of potential, especially for those who like me often race offline.
Click to expand...
I also tested it and, obviously, I found the idea spectacular (I already leave my congratulations here to the modder who managed to implement this in AC).

The issue is that, as you guys said, the behavior of the AI in the starting procedure is very irregular from track to track. For example: I tested the mod at both Mosport and Le Mans 91, with multiclass grids (early 00 protos and GTs). While in Mosport the start was perfect, with cars side by side, in Le Mans, half of the cars did not reach the end of the forming-up lap (due to spins, crashes with each other, etc).

And the mod has two issues that I saw during gameplay: the first is that it seems like all side barriers are nullified by the mod. Another thing is that if you stop mid-race to watch a replay, and then go back to the race, your car is catapulted off the map.
 
FlyingSaucer9
The issue is that, as you guys said, the behavior of the AI in the starting procedure is very irregular from track to track. For example: I tested the mod at both Mosport and Le Mans 91, with multiclass grids (early 00 protos and GTs). While in Mosport the start was perfect, with cars side by side, in Le Mans, half of the cars did not reach the end of the forming-up lap (due to spins, crashes with each other, etc).
Click to expand...
Did they crash at Indianapolis? Because I've tried yesterday with a 90s grid at Le Mans 91 too, and I had just one car spinning at Indianapolis, and this does happen to AI even during a regular race, some cars "ai.ini" probably goes nuts at that turn.

I've tried it at Laguna Seca with Zin5ki SCCA cars, first try half the grid didn't want to move, but after changing every WAV_PITCH=0 to WAV_PITCH=extended-0 everything went fine.
Same thing with Kunos Spa, after changing every WAV_PITCH=0 to WAV_PITCH=extended-0 it worked, but during Eau Rouge the AI starts to slow down no matter the Limit Speed, crawling down to like 40-50 kmh until the end of the formation lap; this with a Group C grid. With a BTCC grid by PM3DM, same slow down during Eau Rouge, and then all the AI stopping and retiring at Kemmel. Strange behaviour indeed, as a simple user i don't know what it can be but probably some errors regarding the extended physics? Also, i didn't have the no-collisions bug, ever.

I was reading CSP wiki, the custom AI section talks about[_EXTRA_PERMISSIONS] ALLOW_CUSTOM_AI_MANIPULATION=1

Is it any different than[_SCRIPTING_PHYSICS] ALLOW_APPS=1 ?
 
DarkHorse96
Does anyone know where the original files are for this track (Texas World Speedway)? I cannot find them anywhere. Thanks! I get the error message "track not found". I noticed all the other tracks have a data file, which was not included with this download. I only want the original files so the track will load.
Click to expand...
Hi DarkHorse, welcome to the forum!

There is a very good resource for tracks, created and maintained by Breathe, which you can find here.
Almost all tracks you can find there (and if not Breathe will add it if you point out a track that isn't in there).
Texas World Speedway and link to download you can find on the tab "Real".
 
FlyingSaucer9
And the mod has two issues that I saw during gameplay: the first is that it seems like all side barriers are nullified by the mod. Another thing is that if you stop mid-race to watch a replay, and then go back to the race, your car is catapulted off the map.
Click to expand...
Did you put he "
[SURFACE_0]

WAV_PITCH=extended-0" at the bottom or within surface_0? Because if you put it at the bottom of the surfaces ini then it breaks walls.
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Vintagedriver
Small writing on AC security
Replies
2
Views
2K
Vintagedriver
Vintagedriver
Terronium-12
Assetto Corsa EVO PC Optimization Guide: The Best Graphics Settings
Replies
5
Views
4K
kpcart
kpcart
Famine
Assetto Corsa EVO Early Access Discussion Thread
42 43 44
Replies
1K
Views
283K
imported_rik19
imported_rik19
Famine
Assetto Corsa Rally Revealed, Heads to Steam Early Access on November 13
7 8 9
Replies
249
Views
46K
MagpieRacer
MagpieRacer
Terronium-12
Assetto Corsa EVO Update 0.3 Now Available in “Open” Beta Test Branch
2
Replies
33
Views
21K
Cote Dazur
Cote Dazur

Latest Posts

Back