Assetto Corsa PC Mods General DiscussionPC

[MrLonguinha17]

A few more small details made for Le Mans 1972.
Version adapted for the Lola T280 (detail on the rear), it is on par with the Alfa 33TT3, but I still need to find out why the cars (with AI) generally crash at the Mulsanne curve.

Changes to the Ferrari 365 GTB4 and De Tomaso Pantera, now I'm turning similar lap times, on the same level as the Chevrolet Corvette.

Ligier JS2 and Ford Capri RS (they have very close lap times), both on the track and in the (AI).

Now the Matra and the Ferrari 312pb will be missing (even though they have not officially raced at Le Mans), they will be tested to achieve similar times.
After having compiled them, using them to create the "BoP" with cars from 1974, 1975, 1976, 1977, 1978, 1979 (as there are many that were converted), they will be adjusted according to similar times at the time.
Lola T280-Ford ( Bonnier/Larrousse/van Lennep )

Ferrari 365 GTB4 ( Jarier/Buchet)

De Tomaso Pantera-Ford ( Chasseuil/Vinatier )


Remembering that it is not always possible to make the performance of the cars equal to the reality of the time, as in addition to climatic factors, the track is not always treated equally in addition to the difference in performance between drivers with the same cars. In the 1972 race, as you can research, there are extreme differences between certain cars, they are trying to leave the cars in certain similar groups if by chance someone does an online race (in a specific group) one day.

 

[Fall Guy]

you have any suggestions for a track to compare multiple cars? But please not the Topgear track.
The track shouldn´t be too long.

The one and only Bilster Berg.

 

[MrHunt]

The driver's head, helmet, and goggles need to be hidden for this to work in VR.
I can't remember what Legend's member name is in this forum.

@GzeroD but this is easy to hide in data-->extract with cm if not and go to driver3d there happens magic

[HIDE_OBJECT_0]
NAME=DRIVER:HELMET_69_SUB1

[HIDE_OBJECT_1]
NAME=DRIVER:HELMET_69_SUB0

[HIDE_OBJECT_2]
NAME=DRIVER:GEO_Driver_FACE

[HIDE_OBJECT_3]
NAME=DRIVER:HELMET_SNOT_SUB0

[HIDE_OBJECT_3]
NAME=DRIVER:HELMET_SNOT_SUB1

 

[X90]

The one and only Bilster Berg.

If you can find it.

 

[jac0]

Hi @Masscot, thx for your review and hints. There are some more gaps i need to close and will fix them in the next updates.
For the metal plate in the cockpit i will check if i can adjust this to look more like brushed metal.
I will check the animation and if i redo the stick animation. thx
Will change the steer lock and will be add it to the next update. 🙂
I know about the issue of this wiper animation. The Wiper animation is only a placeholder done with extension config. I'm working on the correct wiper animation, but due to the current lack of time due to preparation for my exams next week, I inserted this placeholder with the extension config. I thought it would be better with this solution, as without any wiper animation.

hi, can you also please note for a next update of the BMW M4 GT4 2023: the brake lights are hardly visible when the lights are turned on...
Good luck on your exam next week. Hope you can stay away from AC long enough to study well...
cheers!

 

[Haunebu52]

If you can find it.

Pretty sure ACTK put up a version of this last week, but before that it was a wild goose chase trying to find a copy lol

 

[chas1723]

I just noticed the new RSS Huracan Evo2 has a strange problem with the front wheels. The pivot point is at the front of the wheel instead of the hub. So the back end of the wheel swings way out of the body... Hopefully this isn't only on my system. Anyone else see that?

View attachment 1298948

EDIT: Only in the cm showroom. All good on track. (Not unlike the URD 992, where wheels don't steer at all in the showroom. Must be a thing.)

redownload the car. they fixed this issue

 

[Masscot]

@GzeroD but this is easy to hide in data-->extract with cm if not and go to driver3d there happens magic

[HIDE_OBJECT_0]
NAME=DRIVER:HELMET_69_SUB1

[HIDE_OBJECT_1]
NAME=DRIVER:HELMET_69_SUB0

[HIDE_OBJECT_2]
NAME=DRIVER:GEO_Driver_FACE

[HIDE_OBJECT_3]
NAME=DRIVER:HELMET_SNOT_SUB0

[HIDE_OBJECT_3]
NAME=DRIVER:HELMET_SNOT_SUB1

This is a constant annoyance when pre-pubescent modders (who obviously just drift in chase cam) stuff their half-assed cars full of those godawful anime characters, or Max Payne/Vin Diesel/Paul Walker white-suited mannequins complete with sunglasses and hats and inserted ass dildos or whatever. To avoid the faff of identifying every stupid object and listing them all, it's easier to hide them in one go by unpacking the data, deleting ALL of the HIDE configs from driver3d.ini, repacking the data, deleting the redundant data folder, then 'analysing' the car in CM and automatically fixing the driver parameters. All the floating crap should then be hidden.

Or, even better, swap the stupid drivers for sensible ones, with helmets and race suits rather than trilbys and double denim.

 

[Fall Guy]

Has somebody a grassFx / rainfx config for deltafox' Mid Ohio track available please? Thank you!

 

[X90]

Pretty sure ACTK put up a version of this last week, but before that it was a wild goose chase trying to find a copy lol

The original was made by Fat-Alfie and was built with LiDAR data. While it never quite got to 1.0, I am sure it is of substantially higher quality than anything ACTK will put out.

The reason it was pulled from RaceDepartment and scrubbed from the internet was that the actual owner of the Bilster Berg himself went on a litigation rampage once he figured out people were making versions of the track that weren't using his license, which if I recall correctly cost thousands of dollars. He threatened to sue, and that was that, obviously - despite the LiDAR data being very much legally obtained. This is my recollection - feel free to correct me if I'm wrong in some small details.

From what I understand, only RaceRoom has this licensed version of Bilster Berg, and word is that Fat-Alfie's is superior even to that one.

There are a few small CSP issues with the track, but it's brilliant in slower tin-tops and open wheelers. I'm not sure it's possible to find it out "in the wild" anymore.


EDIT: Check the Breathe spreadsheet. You may or may not find a copy.

 

[Masscot]

Has somebody a grassFx / rainfx config for deltafox' Mid Ohio track available please? Thank you!

There's a deltafox Mid Ohio?

 

[Fall Guy]

There's a deltafox Mid Ohio?

Yes, you may find it in Breathe´s list or here

d7fox_mid_ohio

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Unfortunately no grassfx nor rainfx

 

[rdking]

Yes, you may find it in Breathe´s list or here

d7fox_mid_ohio

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Unfortunately no grassfx nor rainfx

Some one needs to do something about that.

 

[Fanapryde]

Yes, you may find it in Breathe´s list or here

d7fox_mid_ohio

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Unfortunately no grassfx nor rainfx

Some one needs to do something about that.

Zwiss' version has grass & rain...

 

[Fall Guy]

Zwiss' version has grass & rain...

I know. In case no one should have the lines of code I will do it by myself later on and share it here.

 

[Haunebu52]

The original was made by Fat-Alfie and was built with LiDAR data. While it never quite got to 1.0, I am sure it is of substantially higher quality than anything ACTK will put out.

The reason it was pulled from RaceDepartment and scrubbed from the internet was that the actual owner of the Bilster Berg himself went on a litigation rampage once he figured out people were making versions of the track that weren't using his license, which if I recall correctly cost thousands of dollars. He threatened to sue, and that was that, obviously - despite the LiDAR data being very much legally obtained. This is my recollection - feel free to correct me if I'm wrong in some small details.

From what I understand, only RaceRoom has this licensed version of Bilster Berg, and word is that Fat-Alfie's is superior even to that one.

There are a few small CSP issues with the track, but it's brilliant in slower tin-tops and open wheelers. I'm not sure it's possible to find it out "in the wild" anymore.


EDIT: Check the Breathe spreadsheet. You may or may not find a copy.

I had no idea about that whole fiasco, thank you for explaining the situation. I always wondered why it was scrubbed from existence. I have the Fat-Alfie version and it's quite good, like you said with slower tin-tops or even some historic cars. I'm curious why he didn't just rename the track to something else to avoid any litigations esp since he properly obtained the LiDAR data... in any case, the version on ACTK says Bilster Berg "Fat-Alfie/Legion/nobody v0.999" --- so I can imagine he'll be getting an email soon lol

 

[Quikslvr]

I know. In case no one should have the lines of code I will do it by myself later on and share it here.

If you've got the GrassFX, I'll take care of the RainFX...

Here you go:

 

[X90]

I had no idea about that whole fiasco, thank you for explaining the situation. I always wondered why it was scrubbed from existence. I have the Fat-Alfie version and it's quite good, like you said with slower tin-tops or even some historic cars. I'm curious why he didn't just rename the track to something else to avoid any litigations esp since he properly obtained the LiDAR data... in any case, the version on ACTK says Bilster Berg "Fat-Alfie/Legion/nobody v0.999" --- so I can imagine he'll be getting an email soon lol

Hm, my version is "0.99". So perhaps ACTK added a few things.



I'll have a look. Apparently a changelog is too much to ask...

 

[Quikslvr]

Hm, my version is "0.99". So perhaps ACTK added a few things.

Mine's 1.0...

 

[X90]

Mine's 1.0...

Both my old copy and Breathe's current link show version 0.99. From what I remember, that was the last official release.

 

[Quikslvr]

Both my old copy and Breathe's current link show version 0.99. From what I remember, that was the last official release.

Odd -- just checked Breathe's list and am seeing v1.0 as the current version:

 

[RicME85]

I have just checked what I have in CM and it says v1.0, also grabbed the one linked on the list and that is v0.99. Scrolling through my JDownloader list (I don't delete my history so I know if I have already grabbed something) and this is the link for the v1.0 - https://modsfire.com/Ujd7wc9Fg75IB9K, where it was posted it was listed as "Bilster Berg Drive Resort 2022 v1.0"

 

[noroardanto]

you have any suggestions for a track to compare multiple cars? But please not the Topgear track.
The track shouldn´t be too long.

Magione has ben my test track for years. The track is short but has a long straight, bumpy section, slow and med speed corners. I don't drive hyper / LMP and F1 cars that may need longer straight and faster corners / chicanes.

 

[X90]

Odd -- just checked Breathe's list and am seeing v1.0 as the current version:

I have just checked what I have in CM and it says v1.0, also grabbed the one linked on the list and that is v0.99. Scrolling through my JDownloader list (I don't delete my history so I know if I have already grabbed something) and this is the link for the v1.0 - https://modsfire.com/Ujd7wc9Fg75IB9K, where it was posted it was listed as "Bilster Berg Drive Resort 2022 v1.0"

I see. The link on the spreadsheet is indeed 0.99. Cheers for the new link, and I'll have a look.

Perhaps Breathe can switch the link to this one you've supplied.

 

[RedEye Racing]

Hello again! How is everyone? I would like to know if there is a standard script for Chameleon paintings. So far I haven't been able to learn how to create these paintings. Thanks.

* I discovered a tutorial and will try to do it. Then i'll come back and give my feedback. *

 

[Greg_ST]

New Update for the Nissan 300zx JTGC (Version 10)

Spoiler: More images

DownloadGTplanet
Download Patreon

 

[Marneus_boss]

Great Nissan!
One question, does your mod include the Real life skins? From IMSA, JGTC and Le Mans?

 

[Greg_ST]

Great Nissan!
One question, does your mod include the Real life skins? From IMSA, JGTC and Le Mans?

Is this a question for me?
if yes, yes the mod has now the real-life JGTC, not 100% but it is close enough, I didn't manage to find one sponsor, and as the real one changes the sponsor often I stick with this one, as the LeMans is the same as the JGTC with some changes nothing special
About the IMSA someone else has made good skins for this one and I think you can find them here.

 

[Organizer777]

Has somebody a grassFx / rainfx config for deltafox' Mid Ohio track available please? Thank you!

Please excuse my lack of credit as I don't know where I got this.

 

[Helzephyr]

The original was made by Fat-Alfie and was built with LiDAR data. While it never quite got to 1.0, I am sure it is of substantially higher quality than anything ACTK will put out.

The reason it was pulled from RaceDepartment and scrubbed from the internet was that the actual owner of the Bilster Berg himself went on a litigation rampage once he figured out people were making versions of the track that weren't using his license, which if I recall correctly cost thousands of dollars. He threatened to sue, and that was that, obviously - despite the LiDAR data being very much legally obtained. This is my recollection - feel free to correct me if I'm wrong in some small details.

From what I understand, only RaceRoom has this licensed version of Bilster Berg, and word is that Fat-Alfie's is superior even to that one.

There are a few small CSP issues with the track, but it's brilliant in slower tin-tops and open wheelers. I'm not sure it's possible to find it out "in the wild" anymore.


EDIT: Check the Breathe spreadsheet. You may or may not find a copy.

My recollection of events differ, but may be incorrect.
The owner contacted Fat Alfie to purchase his version of Bilster Berg, to use as a training tool to be available for track days and such. The owner did not, however, want the track to be freely available. Fat Alfie agreed upon the terms, and subsequently removed the track from Race Department. The last publicly available version before it was removed was the 0.99, with further development being exclusive to the aforementioned owner of said track.