So... Why won't you learn ? You're always hiding behind excuses (oh my PC isn't done, oh I run Linux), after all these years of learning instead of asking for stuff you would've learned some things along the way.
No such problems over here.
Try:
;unfeck borked tree normals, should work if ksTree shader is used
[ALTER_NORMALS_...]
MATERIALS = shader:ksTree
OFFSET = 0, 1e9, 0; or try 0, -1, 0 (-1 = normals point down, can give better results sometimes)
; note, ksambient might need raising if -1 used, might need lowering if 1 is used
DESCRIPTION= lighten/darken trees after normal fix above
MATERIALS = shader:ksTree
PROP_... = ksAmbient, XX ; 0.4 up or down
PROP_... = ksDiffuse, 0.2
:also useful:
;fade out x/y-tree planes when pointing directly towards viewer
[SHADER_REPLACEMENT_...]
MATERIALS = ?tree?, ?TREE? ;assumes 'tree' naming convention, any non-compliant will need adding manually
MESHES = ?tree?, ?TREE? ;assumes 'tree' naming convention, any non-compliant will need adding manually
MATERIAL_FLAG_0 = 1
CAST_SHADOWS = 1
SHADER = ksTree
www.racedepartment.com
www.racedepartment.com
;fix shadow-casting sun in cockpit
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = INT_Glass ; internal glass material name
CAST_SHADOWS = 0
Thanks for this upgrade.Speaking of Ferrari,I created a mix, of the Velo, Shokeu's and modbase versions, for the F430 GT2, with some lighting, lod replacement, among others...If anyone happens to have this car in a better version, please let me know. There are other things missing, but the most necessary thing would be to separate the meshes from the wipers, why I don't know...
There are also strange reflections on the windshield, I think they are due to the skins, if you know any solution, I would appreciate it
(the folder was created as GT3, but the model and some skins, along with the GT2 physics)
As it is an old mod, and free, I imagine we could improve it, not just to fill the grid...
P.S
Well, after much research and elaboration, I discovered that there are 3 models of this car, all with skins that don't fit together, and another, with similar physics.
However, I provide a download link here for anyone who wants to help or discuss these changes.
I tested it against cars RSS GT-N, Gallardo GT2, BMW M3 GT2 kunos, DW Ultima, Vertigo and Marcos, and apparently, it balanced well.
Link updated
ferrari_f430_gt3 - Google Drive
ferrari_f430_gt3 - Google Drive
drive.google.com
Ferrari F430 GT2/GTC
Velo/shokeus/modbase
The most necessary thing would be to separate the meshes from the wipers
There is another model, F430 GT3, more updated, with endurance headlight lenses, and PDK animation, but which also requires wipers. If you allow, I will post the link for you to analyze
Hugs from Brazil
in CM showroom , select the glass and then turn on transparancy... (beware it alters the kn5 file , cm makes a backup first though - but you will not be able to enter online server w your fixed car if the server is running the original car... )
The Matra M620 seems to be a little faulty i think. When i drive it, it's fine but when the Ai drive it, the wheels clip through the top of the car and the body scrapes the ground, and it drives off some of the cornersGood afternoon.
After many tests and improvements to the textures (when possible), by our mate "MrHunt" there are several models from Team Matra, most of them "imported" just the main body (models from the Absolute Le Mans Mod GTR2).
ABSOLUTE LE MANS MODDING TEAM
Antoniog7772
Jempy
Marco1990
Saxony
matteo
Der_jaguar
Commodore
Joeschmoe
Prostriker92
almafera
nickM
The Matra 620 (1966) version would need to be improved (either by the authors themselves, who are always improving; or someone else).
Included in the pack (to make things easier), is the MS 630 model (which I downloaded), which was improved (I don't remember the name now, I exchanged some ideas with him, he improved, in addition to this Matra model, two versions of the Ferrari 206 Dino, which I'm still testing, and also making adjustments to create a version of the 365p2 (1966).
Includes the model of our mate "MrHunt" for those who don't have it yet (other skins and just search).
I mentioned to him that the car's sound was spectacular (but I didn't change the models) that I had already converted (maybe I will do it later). Some models have a better "symphony" in the noise of the V12, it remains to be adapted later.
I had to adapt the "shorttail" model from Brands Hatch, as it didn't exist anywhere else. There is still room to improve the models, as many of them I don't know how to adjust the "headlights", instrument panel, etc...
All models tested, working, and with a "BoP" compared to other cars of the time and with Le Mans race times (within acceptable) as it is complicated to adjust everything (as there are many variables.
Most of the tests were done with setup (basic), gear ratio (the longest), fuel (about 1/3 of the tank).
One lap when leaving the pits, and the next (taking time), most of the time with "slower cars" ahead.
Some cars (mainly the Le Mans skins), there are 2 versions (one for each driver), so if you have a favorite driver in a certain race, for example (Beltoise/Jarier), both versions are already ready (with the helmets of each one).
Below are some prints of some skins and most versions. That's it for now. Let's have fun. Soon I hope to pass on the other models (to compose the grids). Good fun everyone!!
EQUIPE MATRA ( 1966 - 1974 )
FIX
For those who downloaded the "Equipe Matra" pack, I don't know why, the "folder", "UI" of the ( MATRA MS680 '74 ) was missing.
Follow the file link to download.
That I applied lods from the Shokeu's model, because I didn't have any, I don't know how to create lods, but even with this message, the car loads on the track. I also created a GT3 version, with more powerful physics (according to real specifications), with different skins and bodywork. These 2, need proper cleaners and lods.
Thanks I'll try to find Shokeus 430 and find the appropriate files.
[RAIN_FX]
PUDDLES_MATERIALS = Road, RoadDark, RoadMid, PitlaneConcrete, PitlaneTarmac, Kerb, PitlaneExit, OuterFence, MelbourneBuilding
SOAKING_MATERIALS = Road, RoadDark, RoadMid, PitlaneConcrete, PitlaneTarmac, StartGantrySign, PitlaneBuildingWalls, MelbourneThing, PitlaneExit, OuterFence, Tree?
SMOOTH_MATERIALS = PitlaneGrandstand, PitlaneBuilding, GoddardsBuilding, PaddockBuildings, PitEndSign, StarkeysWarehouse
ROUGH_MATERIALS = ground?, Infield?, Car, FenceMesh, Armco, Walls, ground1002, Pitwall
;Starting Line Bridge
STREAM_EDGE_... = -221.74, 99.72, 78.6, -215.45, 99.73, 45.43
STREAM_EDGE_... = -217, 99.75, 44.8, -223.41, 99.71, 78.62
;GoddardsBuilding
STREAM_EDGE_... = -118.38, 99.8, 123.74, -115.47, 99.69, 107.53
STREAM_EDGE_... = -115.53, 99.76, 107.63, -167.52, 99.71, 98.18
STREAM_EDGE_... = -171.29, 99.72, 118.76, -157.4, 99.76, 121.25
STREAM_EDGE_... = -157.01, 99.69, 119.83, -145.03, 99.75, 121.97
STREAM_EDGE_... = -144.63, 99.73, 120.78, -133.06, 99.68, 122.76
STREAM_EDGE_... = -132.61, 100.1, 122.61, -118.58, 99.79, 123.87
;PitlaneGrandstand
STREAM_EDGE_... = -192.18, 102.19, 95.58, -221.78, 101.09, 99.76
;PitlaneBuilding
STREAM_EDGE_... = -226.64, 104.45, 92.99, -233.22, 103.76, 91.87
STREAM_EDGE_... = -231.86, 98.41, 91.91, -250, 98.42, 88.46
STREAM_EDGE_... = -249.96, 99.81, 88.85, -299.54, 99.8, 79.41
STREAM_EDGE_... = -295.59, 95.77, 80.53, -332.45, 95.78, 73.51
STREAM_EDGE_... = -332.37, 95.32, 73.54, -367.42, 95.33, 66.87
STREAM_EDGE_... = -367.39, 94.81, 66.88, -402.77, 94.83, 60.16
;PaddockBuildings
STREAM_EDGE_... = -402.41, 94.64, 57.96, -409.46, 94.61, 56.78
;MelbourneThing
STREAM_EDGE_... = -426.14, 100.03, 202.81, -425.42, 100, 202.98
STREAM_EDGE_... = -425.42, 100, 202.98, -424.14, 100.05, 201.9
