Assetto Corsa PC Mods General DiscussionPC

[RMi_wood]

In a strange turn of events I reinstalled SOL back again today along side Pure 0.238 because I felt the clouds and the way the sky looked better using SOL planner than in pure. However I am sure you can customize these things just never tried to go in depth
with all the advanced settings Pure has to offer I am sure it can achieve much more that what I use it for.

Here is my latest test using SOL for weather instead of pure. Set video playback quality to 1080p for best visuals.


Look at the Sky here using SOL planner it looks realistic. For some reason I can't get the same cloud look with pure planner.

I also use SOL planner 2.5 with PURE since day 1 and really am happy with the results.

 

[Jodurson]

What the hell is going on with the ai lately?!

Without changing anything, they’re not pitting at all now after a handful of laps during practice and qualifying.
In the races, they’re rejoining the races after teleporting back to the pits, when this didn't happen up until a few days ago.

Welcome aboard to the "wtf you broke up?! I don't done anything!" AI train, choo-choo!

Sorry for joke, but this topic also makes me (and others too) really cause I don't understand - what could gone wrong and broke the behavior of the AI. %)

I've been trying to figure it out for a week now, but it's probably just how the stars came together.

 

[Racer63]

If it's this what you mean:

View attachment 1339011
Go to page 21 in sol config and increase ta_fog_distance %, which is what I suggested for the Mt Fuji too. the app wil save this per track...

View attachment 1339014

Yes!, that did it. Thank you all for your help.

 

[Arturo4AGE]

anybody can help me with these trees pls

 

[SuperSportX]

Is there a way to not make the AI teleport to the pits when they spin out? AFAIK the damage is not enabled yet whenever they get pit maneuvered by another ai or spin out they give up most of the time unless they are turned the right way after the crash.

 

[Jodurson]

Is there a way to not make the AI teleport to the pits when they spin out? AFAIK the damage is not enabled yet whenever they get pit maneuvered by another ai or spin out they give up most of the time unless they are turned the right way after the crash.

Check AI apps by Nuzzi on RD and on his Patreon - he have solution to this.

 

[lorelord]

does anyone know of an app or way to copy the ai setups?

as i understand the ai on 100% difficulty will do their own setups after a practice/qualification session.

is there a way to copy the setups they then use?

 

[RMi_wood]

anybody can help me with these trees pls

looks like Codemasters trees from DiRT.

option 1 - try normals up and alpha_blend
option 2 - delete them, forever, all of them
option 3 - plant new trees (see option 2)

 

[pugsang]

looks like Codemasters trees from DiRT.

option 1 - try normals up and alpha_blend
option 2 - delete them, forever, all of them
option 3 - plant new trees (see option 2)

Been there, done that

 

[Perico Lospa]

anybody can help me with these trees pls...

option 4 -

 

[FlyingSaucer9]

Thanks, man. I actually think I might have those other ones you noted. I'll switch it up.

I only have one 1970 nascar (possibly) from legion. So you probably already have the superbird. Doesn't make for a fun grid with only the one.... and then I have the 1971 nascar carset that most of us have already probably. If you find any 1970s, let us know. I would be interested.

Ye, its been some weeks that I'm searching for a 1970 Nascar mod. I know that there was a AC nascar group on Facebook that could have a mod for that year, but this group simply vanished - and I cant find any more info about them

The file to change driver names is the ui_skin.json file in the skins folder.
But there are instances where there is no such file, yet car has a driver+name+nationality.
Where does that come from?
Is there another file where names orginate?

No. Just rename the skin file (through the CM) and you will be able to edit the name, team, number, etc...

All the cars come with a JSON file, because its a standard document in a skin file. But some people dont edit it (adding the necessary info) - and thats why some of the JSON files are blank.

 

[Paulo Ribeiro]

I test drive my modded cars at ksMonza "66" with an October date and the fall colors where great. I've updated to Pure 2.50 with 0.2.3 preview 1 and have lost the fall colors. Am I doing somthing wrong? I was using CSP 1.60, I know it was old version but it worked good for me. My Racinjoe013 fall track mods don't seem to work either.

What the hell is going on with the ai lately?!

Without changing anything, they’re not pitting at all now after a handful of laps during practice and qualifying.
In the races, they’re rejoining the races after teleporting back to the pits, when this didn't happen up until a few days ago.

As someone said before (he has not got any like, I wonder why, lol), the problem is are:

All together; CM, CSP, SOL, PURE, PP Filters, and a couple more.
Every time one have an update, screws something, making people losing more time to fix, than playing.

Nothing wrong with updating for better any feature, unfortunately it seems to affect other APPs and features.
Honestly, I hope this start heading to a better end, or will be a never ending story. Really.

 

[interminded]

Ye, its been some weeks that I'm searching for a 1970 Nascar mod. I know that there was a AC nascar group on Facebook that could have a mod for that year, but this group simply vanished - and I cant find any more info about them

No. Just rename the skin file (through the CM) and you will be able to edit the name, team, number, etc...

All the cars come with a JSON file, because its a standard document in a skin file. But some people dont edit it (adding the necessary info) - and thats why some of the JSON files are blank.

That's the thing, sometimes there isn't JSON file.
How do I solve that?

 

[Fumblefap]

I've been bored at work recently. What do you guys think? I haven't finished it yet

 

[Fuzo]

jac0 I tried to fix that z-fighting at Zolder, but it looks like I made it worse

Quikslvr grass was not touched for 1.2 update AFAIK Asphalt was touched though, but just very slightly

I will look on both issues again when I will have some time.

 

[Fanapryde]

anyone else can confirm Z-fighting on the new version of rt_zolder on the big billboard above the start/finish?
Also the asphalt is lighter on the newer version, which does not look better imho...

(I went back to v1.01 from 1.2 because of these issues, I don't find it an improvement over the older version... )

jac0 I tried to fix that z-fighting at Zolder, but it looks like I made it worse

Quikslvr grass was not touched for 1.2 update AFAIK Asphalt was touched though, but just very slightly

I will look on both issues again when I will have some time.

There's absolutely no Z-fighting on my side here (v1.2)

@interminded : just add one from another, and change to your liking.

 

[Frank25]

There's absolutely no Z-fighting on my side here (v1.2)

@interminded : just add one from another, and change to your liking.

I've tested v1.2 in VR with my Oculus Rift and there is z-fighting of the "Chrisal / Kurina" and "State of Art Racing" billboards at the start-finish straight.

 

[Fanapryde]

I've tested v1.2 in VR with my Oculus Rift and there is z-fighting of the "Chrisal / Kurina" and "State of Art Racing" billboards at the start-finish straight.

Must be a VR thing then, no issue on my triple screen setup, steady as a rock.

 

[Racer63]

That's the thing, sometimes there isn't JSON file.
How do I solve that?

Just go to another car´s folder that has JSON file. Copy and paste in your car folder. Open the file (it´s just a text file) and modify as you wish with driver names, team names, nationality, car number, etc. Then save and close. That´s all.

 

[racinjoe013]

jac0 I tried to fix that z-fighting at Zolder, but it looks like I made it worse

Quikslvr grass was not touched for 1.2 update AFAIK Asphalt was touched though, but just very slightly

I will look on both issues again when I will have some time.

Actually there is one file that is different on Zolder 1.2 vs the older version that makes the grass more yellow and saturated.

Zolder 1.2 uses a diffuse texture for the main grass areas named bathground.dds. Version 1.01 used a texture named bathgrounddesat.dds that was just a desaturated version bathground.dds. A simple fix might just be to include a small Grass track skin that has the bathgrounddesat.dds in it for those that prefer the less saturated grass. That's what I made for myself.

 

[Chem_Flummi]

I decided to add 2 new features:
The car got the double rear wing and the rear bumper with more vents.
Both things will be available per skin via an [INCLUDE:...] line in your skins config.
Template skins for all combinations are included as well (including recalculated AOs forcthe adjusted car parts).
So it is possible now to recreate an even higher amount of skins more realistic!

Most things are done, not too long to wait for you anymore!

 

[FlyingSaucer9]

That's the thing, sometimes there isn't JSON file.
How do I solve that?

Open the CM > CONTENT > CARS > (CAR YOU WANT TO EDIT THE JSON) > SKINS > (OPEN THE SKIN YOU WANT TO EDIT) > CHANGE THE NAME OF THE SKIN (its the name on the top of the skin preview) > SAVE - after that, it will generate a new JSON file.

In some really rare cases, a car can´t save the changes on name and can´t generate a new JSON file. This happens because of some encrypted data that corrupts any changes in the skin names.

 

[Arturo4AGE]

looks like Codemasters trees from DiRT.

option 1 - try normals up and alpha_blend
option 2 - delete them, forever, all of them
option 3 - plant new trees (see option 2)

it is, its the conversion from gabenhood, i cant find the v3 version, so im trying to fix the v2

 

[interminded]

Open the CM > CONTENT > CARS > (CAR YOU WANT TO EDIT THE JSON) > SKINS > (OPEN THE SKIN YOU WANT TO EDIT) > CHANGE THE NAME OF THE SKIN (its the name on the top of the skin preview) > SAVE - after that, it will generate a new JSON file.

In some really rare cases, a car can´t save the changes on name and can´t generate a new JSON file. This happens because of some encrypted data that corrupts any changes in the skin names.

Thanks!!

 

[Breanuts]

Jumping in here to share that I have stumbled on an interesting blog which is a bit of a hidden gem chronicling motorsports in Southeast Asia during the colonial and post-colonial era.

Rewind Resource Archives

Center for South East Asian Motorsport Resources

rewind-media.com

 

[Vintagedriver]

Is there a simple way to increase the starting grid with 1 or 2 extra cars.
For a 1950 championship I have exchanged the Reims Gilles75 to the much better made 23pits/grid @RMi_wood track (thanks btw for creating), but I need a 24 cars layout. According to two postings at reddit this can be simple done using CM, but they did not publish the method.
Is this true and how to do?

 

[24H]

Found this link. Dont know whether its up to date

http://toms-sim-side.de/tutorials/dokumente/PIT_START.pdf

 

[MiljuDelems]

Is there a simple way to increase the starting grid with 1 or 2 extra cars.
For a 1950 championship I have exchanged the Reims Gilles75 to the much better made 23pits/grid @RMi_wood track (thanks btw for creating), but I need a 24 cars layout. According to two postings at reddit this can be simple done using CM, but they did not publish the method.
Is this true and how to do?

Not in front of pc ATM but if I recall correctly Simply under the track description increase number in the box "starting grid"

Édit: tipo

 

[Vintagedriver]

Not in front of pc ATM but if I recall correctly Simply under the track description increase number in the box "starting grid"

Édit: tipo

are you talking about the UI_track.JSON file in the UI folder.

 

[shi]

Skin and ext_config for Leipzig - Porsche Test Track

Skin and ext_config for Leipzig - Porsche Test Track | shin956

Patreon is empowering a new generation of creators. Support and engage with artists and creators as they live out their passions!

www.patreon.com

Spoiler: old look

1. Install Reworked Porsche Leipzig Track 1.0 by @DaBaeda

Assetto Corsa PC Mods General Discussion

Wonderful. Many thanks. I think the 2020 DTM mod posted there on RD today was the free one from FSR? Yes, the 2020 DTM from FSR, looking from their prefix on car's files and credits.

www.gtplanet.net

2. Install Update for Porsche Leipzig Track from @CrisT86

Assetto Corsa PC Mods General Discussion

I found another modding page on Facebook, but it's not required to join. https://www.facebook.com/ArmgarageTH EDIT: The page has a normal 2013 Mitsubishi Lancer of all things. Not an Evo X, but a normal lancer.

www.gtplanet.net

3. Install my skin and ext_config
Put the downloaded and extracted files in the db_leipzig_porsche folder.

4. Activate skin

5. Start AC

Does not overwrite files.

Update Details;
Fixed problem with normal map textures not being applied to buildings. (They were unnaturally too bright looking.)
Changed the green texture at the edge of the road to a grass texture.
Updated textures for kerbs and 150m, 100m, and 50m signs.
The flag was hidden because it was too far from the pole.
Other minor fixes have been included in ext_config.

Credits & Thanks;

Skin and ext_config by shin956
grass and kerb (edited) textures by kunos
The grass edge texture was taken from the GTR2 version of Leipzig.

Download (mediafire)

Enjoy.