Assetto Corsa PC Mods General DiscussionPC

[Rainmaker87]

UPDATE Potrero de los Funes

v2.4
-new edits by CrisT86
-gained 15 FPS more at night races

Potrero de los Funes big update RELEASED | Rainmaker Sim Racing Mods

Get more from Rainmaker Sim Racing Mods on Patreon

www.patreon.com

 

[StoffelWaffle]

Did you check the @Breathe track listings because there are a few Jerez circuit alternatives, if I well remember.
There is also a improvement for this AlexMeyer version at:

Tracks - jerez - PRM (exits) - 3dtrees - VAO - visual improvements

ludwig6666 submitted a new resource: jerez - PRM (exits) - 3dtrees - VAO - visual improvements - prm, 3dtrees Read more about this resource...

www.overtake.gg

Jerez 1997 Sponsors

This track skin is for "jerez" track mod. Preview and screenshots Installation: copy the content folder to "assettocorsa" folder. For content creators: If you are uploading a video with one of my sound mods or trackskin please mention me as...

www.overtake.gg

Tracks - Adding spectators to Circuito de Jerez

juanabolche submitted a new resource: Adding spectators to Circuito de Jerez - Circuito de Jerez Hi everyone. Personally, I don't like circuits without audiences, it takes away a lot of atmosphere. Therefore, I share a little mod for the Circuito de Jerez-Ángel Nieto, that adds spectators to...

www.overtake.gg

Yeah, I did. And it still looks terrible. Not matter how much you polish it, a turd is a turd lol

The AC Jerez is extremely dated and quite inaccurate. And that's me being diplomatic.

I've found that AMS2 is the place to go for a good version.

Shame AMS2 is so bloody big, 100 gigs and I use at most 15 cars lol

 

[carTOON]

Yeah, I did. And it still looks terrible. Not matter how much you polish it, a turd is a turd lol

Man, I recommend a lot of free time, a lot of practice and then you can make your own flawless version...

 

[Greg_ST]

The second livery skin from the (rare skin pack 2.0) "my version"

 

[Zoonsky]

and again preview settings


View attachment 1350848

View attachment 1350849

would you mind sharing? looks incredible

 

[Sebasje]

wich person or group making the best quality gt3 cars ,can somebody give me a direction

 

[RetroBX]

Check the RSS cars. They are perfect.

GT-M Championship - Phase 1

Cars are available individually or as a pack!Initial release - 2019-2023 This is the GT-M group of cars by Race Sim Studio, a fine and highly detailed representation of the modern GT and Endurance racing cars. Make a car or pack selection with the selection box on this page. Cars available

racesimstudio.sellfy.store

 

[Gregz0r]

The AC Jerez is extremely dated and quite inaccurate. And that's me being diplomatic.

I've found that AMS2 is the place to go for a good version.

Yeah, it’s a shame the tracks specifically from AMS2 can’t be converted, as their historic versions of Interlagos, Silverstone & Barcelona ‘91, Jerez ‘88, Spa & Monza ‘93 are outstanding.

 

[Vintagedriver]

Man, I recommend a lot of free time, a lot of practice and then you can make your own flawless version...

you are absolutely right on this, but keep in also your mind some simmers prefer to race in their limited spare time.

 

[JK1977]

MB SL63 AMG (The Crew2 Touringcar) Track Test

 

[Zoonsky]

Does anyone know to which driver model these textures belong? I have tried every ASR driver model I have installed but it fits none of them, except for the face and suit.

 

[lorelord]

View attachment 1350952
Does anyone know to which driver model these textures belong? I have tried every ASR driver model I have installed but it fits none of them, except for the face and suit.

unpack data and check the driver3d.ini - should tell you the name of the driver model the car in question is using

 

[TonySSS]

MB SL63 AMG (The Crew2 Touringcar) Track Test
View attachment 1350980View attachment 1350981View attachment 1350982View attachment 1350983View attachment 1350984View attachment 1350985View attachment 1350987

Only Mercedes-Benz logo is missing in front and rear bumpers and it's perfect

 

[Fuzo]

Clio Cup Gen 5 Phase 2 incomming this summer

 

[Zoonsky]

unpack data and check the driver3d.ini - should tell you the name of the driver model the car in question is using

Of course, forgot to include that information, thank you.

Does anyone have the driver model "asr-driver-1995"?

 

[StoffelWaffle]

Man, I recommend a lot of free time, a lot of practice and then you can make your own flawless version...

The good old 'if you don't do it you can't criticise it', yeah you're right I'll stick with cars and car skins - can't do it all eh ?

I recommend you learn how to use grassfx and rainfx as well, but I'm not arrogant enough for that - after all I can't mod tracks so it's not my place to comment on such matter

 

[RFO2002]

Braga - v1.0

View attachment 1350363
View attachment 1350364

"Circuit of Braga (formal name: Circuito de Velocidade Vasco Sameiro) is a permanent circuit, north of Braga, Portugal.
Braga presents some of the most fun and flowing circuit action you can think of, taste it once and you will never stop eating!"
- m.wood 2024

features:

• 18 pit/grid w/AI
• 4 layouts: featuring the 2 historic chicane treatments and 2 fantasy treatments
• 2 cameras per layout
• AllTheDamnFX™ (requires CSP)
• extended physics for semi-realistic tire barrier action

credits:

• original 3d model by @LuisB
• converted with pemission by @RMi_wood
• crowd-facing spectators by @LuisB
• sections files by @Fanapryde
• additional input by @pugsang
• beta testing by @Breathe, @LuisB, @Fanapryde

:: DOWNLOAD ::

hello @RMi_wood The track is very good, and I think for me, the course bumps and sausage curbs are very good. For me, loading and exit the track takes a very long time. The rest, with more work if possible, is a very nice track for a race or track day.

 

[henrik7000]

Is there anyone who knows about Riley & Scott Mk III Autoexe LMP99 is being made

 

[Josuracer]

Braga - v1.0

View attachment 1350363
View attachment 1350364

"Circuit of Braga (formal name: Circuito de Velocidade Vasco Sameiro) is a permanent circuit, north of Braga, Portugal.
Braga presents some of the most fun and flowing circuit action you can think of, taste it once and you will never stop eating!"
- m.wood 2024

features:

• 18 pit/grid w/AI
• 4 layouts: featuring the 2 historic chicane treatments and 2 fantasy treatments
• 2 cameras per layout
• AllTheDamnFX™ (requires CSP)
• extended physics for semi-realistic tire barrier action

credits:

• original 3d model by @LuisB
• converted with pemission by @RMi_wood
• crowd-facing spectators by @LuisB
• sections files by @Fanapryde
• additional input by @pugsang
• beta testing by @Breathe, @LuisB, @Fanapryde

:: DOWNLOAD ::

great track, I like it, just one thing, for some reason when I want to race against other cars, the cars dont start the race, just remain still, is there some setting to change? (running with CSP0.2.2) thank you in advance

 

[giorgos_nes]

great track, I like it, just one thing, for some reason when I want to race against other cars, the cars dont start the race, just remain still, is there some setting to change? (running with CSP0.2.2) thank you in advance

Did you restart the race? It happens often in many tracks, but most of the times the problem is solved after you ve restarted the session.

 

[RacingManiac]

So my VIR problem seems to be resolved if I check this box:

...not sure if its placebo or not...

 

[Josuracer]

Did you restart the race? It happens often in many tracks, but most of the times the problem is solved after you ve restarted the session.

I just try it, yes after restart the race it works, but is the first time this happened to me, thank you

Request for info, I drive in the Anneau du Rhin track by Rainmaker, and noticed a low fps section, please see pictures, is there some way to improve the track for best FPS? or any update? thank you

 

[puerk0spin]

I found an invisible step in the middle of the road in the JCRR stage "Muracciole-Vezzani", that collides with the front of the car (at least with Ford Focus WRC 2004 and Ford Escort Cosworth Gr.A "Malbrun" from kronos).
It happens to me since I updated the CSP some time ago. I would like to know if there's someone else that has experienced this too and if there's a known solution.

 

[alexlockout]

Lotus Type 23 Cosworth Mk XII



Configuration:
Engine - Ford Cosworth 116E Mk XII.
Displacement - 1,594 cc.
Power - 140 bhp @ 6,500 rpm.
Gearbox - Hewland Mk III 5-speed.
Max speed - 240 km/h.
Power to weight - 0.30 hp/kg.
Wheelbase - 2,296 mm.
Weight distribution - 42/58.
Track - 1,308 mm, 1,273 mm.
Tires - 127/528 mm, 165/584 mm.
Weight - 467 kg.

Specifications: https://www.ultimatecarpage.com/spec/1472/Lotus-23-Cosworth.html .

Download v1.0 (clean install): https://mega.nz/file/OsFmAIRI#p1YB0BMgqN2RcaCmeTtInk4cTG9f5mqIOUhW33M7MmM .

---------------------------------------------------------------------------------------------

Question and Answer​

To avoid confusion; should we understand that this superb mod is the real-data-based improvement of your equally superb "lotus_23_cosworth" originally marked (or at least, that's how I have it on my hard drive) as version 1.6, from 1962 and with the sound borrowed from the Lotus 25?​

A little clarity. Yes, everything is very confusing with my Lotus 23 models/versions, I'll try to clarify the situation.
Initially, I made exactly the model/version from today's post, although it was then called the Lotus Type 23 Cosworth (now it's the Lotus Type 23 Cosworth Mk XII)

Initially, it was the only car I focused on, and I tried to make it as close as possible to the specifications presented on the website. Then I saw a video on YouTube about a version with a modern aero package for hill climbing, so I made one. Then a version with a less powerful engine (than the main version) appeared, and then one with a more powerful one. But honestly, they didn't receive all the attention from me, and their main purpose was to serve as grid fillers for various car packs/sets.
Ultimately, the main car is the Lotus Type 23 Cosworth Mk XII (which was originally there, though it had a slightly different name). The other versions were, so to speak, grid fillers, and I ultimately abandoned them. Naturally, you can use any models and versions you like. But I would recommend you use the latest Lotus Type 23 Cosworth Mk XII. In my opinion, it's a significant improvement in the car's handling on the track compared to previous versions.
P.S. Just don't enable advanced physics for this car.


Thanks:
Legion: https://perendinator.blogspot.com/2024/04/lotus-type-23-23c-versions-20240410.html .
1Redhottopic: https://www.overtake.gg/downloads/lotus-23.61286/ .
TomLehockySVK: https://www.overtake.gg/downloads/lotus-23-various-liveries.61120/ .

​

​

 

[ninezeroniner]

Man, I recommend a lot of free time, a lot of practice and then you can make your own flawless version...

You seem EXTREMELY touchy on the subject so maybe you qualify to tell us how to review tracks.

 

[RacingManiac]

Physics Experiments introduced in the last preview

View attachment 1350839

Actually which version is this? Most of those new option I am not seeing in the Preview 211?

EDIT NVM, looks like I need to reload CM when I install new version of CSP or somehow some options don't show...

 

[KevinK2]

Here's some fixes to get vn_motorland aragon fully functional. Looks to be an RFactor 2 conversion. I was trying to find a way to contact @neil shaw but it seems like his messaging link here is blocked. If he or anyone has a problem with this, I will take it down.

-fictional drs
-ai for gp, motogp, speed reworked
-new ai hints (or removed), sidelines, and pitlanes
-basic rainfx
-UI outlines, maps, geotags
-ideal_line.ai added
-simple cameras reworked
-crew flipped sides
-condensed vao files

It was pointed out to me that there is a hole to the left of pit entry, but that's beyond my paygrade to fix. I also had a problem with previous versions of CSP with the Speed layout pit, but it seems resolved with latest. It could use graphical work, but I think it's fun to drive.

I suggest a clean install to avoid conflicts with ai and vao files.

vn_motorland_aragon_complex reworks:

335.86 MB file on MEGA

mega.nz

 

[X90]

Yeah, I did. And it still looks terrible. Not matter how much you polish it, a turd is a turd lol


Shame AMS2 is so bloody big, 100 gigs and I use at most 15 cars lol

And it's constantly a moving target with regards to physics and car feel. I can confirm, though, that the upcoming 1.6 preview for the tyre model (just the Stock Car Brasil 2024 and F1 car for now) does make a noticeable difference in the right direction. Still a ton of bugs, though.

 

[graveltrap]

Does anyone have a nice semi slick tyre texture for smaller diameter wheels? Something Yokohama or Dunlop would be ideal...

 

[CrisT86]

Here's some fixes to get vn_motorland aragon fully functional. Looks to be an RFactor 2 conversion. I was trying to find a way to contact @neil shaw but it seems like his messaging link here is blocked. If he or anyone has a problem with this, I will take it down.

-fictional drs
-ai for gp, motogp, speed reworked
-new ai hints (or removed), sidelines, and pitlanes
-basic rainfx
-UI outlines, maps, geotags
-ideal_line.ai added
-simple cameras reworked
-crew flipped sides
-condensed vao files

It was pointed out to me that there is a hole to the left of pit entry, but that's beyond my paygrade to fix. I also had a problem with previous versions of CSP with the Speed layout pit, but it seems resolved with latest. It could use graphical work, but I think it's fun to drive.

I suggest a clean install to avoid conflicts with ai and vao files.

vn_motorland_aragon_complex reworks:

335.86 MB file on MEGA

mega.nz

back in time, in 2021, i've completely reworked it. Did you changed and removed some variants of the track? The one i have in my archive are different than the one in your package.

yours

mine

Thanks