Assetto Corsa PC Mods General DiscussionPC

[axydraul]

Trying to recreate the "Mille Miglia 1955" using different routes to represent the variety of the era (with what we have available).

Brescia ( TvCam )
S.Moss / D.Jenkinson - Mercedes 300 SLR


Brescia >> Ravenna ( TvCam )
U.Maglioli /L. Monteferrario - Ferrari 118 LM


Ravenna >> Rimini ( onboard )
S.Moss / D.Jenkinson - Mercedes 300 SLR

Ravenna >> Rimini ( TvCam )
S.Moss / D.Jenkinson - Mercedes 300 SLR


Just for information on how I'm trying to simulate the "Mille Miglia 1955".

I'm using 20 different cars (most of them are available for download on websites, some I adapted and others I invented).

-Ferrari 118/121 LM / Ferrari 750 Monza
-Mercedes 300 SLR / Mercedes 300 SL
-AM DB3s / AM DB2.4
-Jaguar D-Type
-Maserati A6GCS / A6GCS Coupe / 300s
-Lancia D24 / Aurelia B20
-Triumph TR2
-Austin-Healey 100s
-Gordini T24s
-Porsche 550 Spyder / 356
-Alfa Giulietta Sprint / Alfa 1900SS Zagato
-Fiat 8V


In total (62 participants).

1. Stage 1: for this route (I recorded the times of all the cars, as it was done individually), but I only recorded the main ones.
2. Stage 2: according to the numbering (starting order), I grouped them into groups of 5, 6 or 7 cars (I chose one to drive) and kept a note of the times of the "AI cars".
3. Stage 3: I did another shuffle (divided into 15 groups of 4 or 5)..still according to the starting order (the last 30 were separated into pairs).

As in the first part of the route (in the real race), the slowest cars arrived as time went by, that's how I did it.

In the other stages (routes), I will change a little more.

which tracks do you use?

 

[Rodger Davies]

which tracks do you use?

The second one is Feldbergring, the third is Fonteny reverse, both by the legend FatAlfie.

Not sure about the first one but it has prominent Simtraxx branding.

 

[Ararelyracer]

They dont seem blurred on the Image. This how used discs will look 👍🏻

If anyone hasn't responded to this, yes there is a way. This is my go to code and format in the ext_config which I kinda toyed around to have that effect.


[BRAKEDISC_FX]
ACTIVE = 1
CERAMIC = 0 ; use ceramic look
CARVED = 1 ; add a bit of carving, radial lines (fast for shader to compute)
CARVED_FREQUENCY = 12 ; increase to make more lines
ALPHA_MASK = 0.0, 0.75
LUMINOCITY_MASK = 1.0, 0.0
NORMAL_MASK = 1.0, 0.0
REFLECTION_F0= 0.44, 0.06
REFLECTION_SHARPNESS=150, 200

[BRAKEDISC_FX_FRONT]
DISC_RADIUS = 0.192
DISC_INTERNAL_RADIUS = 0.123
GLOW_OFFSET= 1.0

[BRAKEDISC_FX_REAR]
DISC_RADIUS = 0.188 ; radius of a brake disc
DISC_INTERNAL_RADIUS = 0.121 ; radius of an inside part of a brake disc
GLOW_OFFSET= 1.0

Thanks very much, will test this out!

 

[MightyL]

I am building an app for ac. anybody know why the button is not clickable? The button shows but I can't click on it...

import ac

class ButtonTestApp:
def init(self):
# Create the app window
self.app_window = ac.newApp("Button Test")
ac.setSize(self.app_window, 200, 200)

# Label to show button click status
self.label = ac.addLabel(self.app_window, "Press the button")
ac.setPosition(self.label, 10, 50)

# Button to trigger click event
self.button = ac.addButton(self.app_window, "Click Me")
ac.setPosition(self.button, 10, 100)
ac.setSize(self.button, 180, 30)
ac.addOnClickedListener(self.button, self.on_button_click)

def on_button_click(self, *args):
# Update the label when the button is clicked
ac.setText(self.label, "Button Clicked!")

button_test_app = None

def acMain(ac_version):
global button_test_app
button_test_app = ButtonTestApp()
return "Button Test"

def acUpdate(deltaT):
global button_test_app
if button_test_app:
pass

 

[ninezeroniner]

Is there a real reason why the “open wheeler” tag bs is still on?

 

[Frank25]

Thanks Frank25, I changed 20 to 16 in GRAPHICS ADJUSTMENTS and in CSP, but it didn't help. Only 4 cars for me have wheels, all others up to the first have none. Maybe a setting for the distance is wrong.

The fix is only for the cockpit view and the value under "Main" (not "Outside main") should be changed from 10 to 16 (not 20 to 16). That works for me as only 6 cars in the middle of the field have no tires. My test car is the stock Kunos Lotus 49. You should check, whether you changed other LOD settings under "GRAPHICS ADJUSTMENTS" and reset it to default.

 

[Papifix]

Thank you, now I know more. I'll try it right away

Yep, the reset helped. Strange, I hadn't changed anything in the lods.

 

[Fanapryde]

Ferrari 500 Mondial Pinin Farina Coupe(v1.0) by F40 LM Lover

It is tested in CSP 2.5 Preview1
You need CSP latest Version
View attachment 1391009View attachment 1391010View attachment 1391011View attachment 1391012
1. 3d Model
1) Based on Gran Turismo 7 by Poly Pony Digital
2) Some Parts are from Forza Horizon 4
3) Converted by F40 LM Lover
2. Features
1) Exterior Animations
-. Left Door : Extra A
-. Right Door : Extra B
-. MOTOR Hood Open : Extra C
-. Quarter Window Open : Extra D
-. Fog Lights : Extra F
2) Interior Animations
-. GAS, Brake, Clutch Pedal with Feet : Don't need Key assign
-. Trun Signal Switch with Arm & Hand : need Key Assign
-. Lighting Signal Switch with Arm & Hand : need Key Assign
-. Windows Open with Arm & Hand
-. Fog Light with Arm & hand
-. H-Pattern Shifter with Arm & Hand
-. Horn With Arm & Hand
3. Physics : F40 LM Lover
4. Sounds : Kunos' 250 GTO
5. Download Link is in the description of video.

A little annoyance:
The file name (ferrari_500_monidal_pinin_farina_coupe) is with 38 characters too long (max 32 iirc) which prevents max speed and driven distance being recorded in CM.
It also says monidal (should be mondial), but that is not important.

 

[FrustratedUse]

Don't know how many know about this car pack, I only found them recently because a group I race online with is big into the US Trans Am series, but a pack for the TA Class was released a little bit ago (another car added to the pack last week). They're actively being developed, not by me, but the creator is active on social media / discord. And unless I missed another mod I think it's the first time we get to play around with the top spec in the US Trans Am series in AC.
View attachment 1391187
Only limited time using them (no races yet), but they're a lot of fun to throw around. They're a bit different from the VRC TA2 cars if you've ever driven those, a bit more grip and power to deal with, better braking, less body roll, but still will bite hard you if you're not careful. I believe all the cars in the pack are the same under the hood power and physics wise, but you (currently) have 5 "shells" to choose from. Here is a link if anyone wanted - https://vr506.gumroad.com/l/transam_pack

Charging money for Forza models sure is a business strategy these days it seems. Should just start extracting all the Forza models and sell them on gumroad, Would make bank it appears.

 

[StoffelWaffle]

No fix here sadly, but just wanted to chime to say I've been noticing the same thing recently (most recent csp preview). Pretty much have the same settings you have there too. Was working fine previously (adds awesome detail if anyone doesn't have it on)


Don't know how many know about this car pack, I only found them recently because a group I race online with is big into the US Trans Am series, but a pack for the TA Class was released a little bit ago (another car added to the pack last week). They're actively being developed, not by me, but the creator is active on social media / discord. And unless I missed another mod I think it's the first time we get to play around with the top spec in the US Trans Am series in AC.
View attachment 1391187
Only limited time using them (no races yet), but they're a lot of fun to throw around. They're a bit different from the VRC TA2 cars if you've ever driven those, a bit more grip and power to deal with, better braking, less body roll, but still will bite hard you if you're not careful. I believe all the cars in the pack are the same under the hood power and physics wise, but you (currently) have 5 "shells" to choose from. Here is a link if anyone wanted - https://vr506.gumroad.com/l/transam_pack

Had to whip up this quick skin once I saw this livery for the Mustang in online photos

Trans Am 2023 #20 Chris Dyson - TA Ford Mustang

Here is a quick recreation of Chris Dyson's #20 Ford Mustang (image found in an article about his own racing team website launch in 2023). Link to the car (and full pack) can be found in the download (actively being developed VR506 Simulation...

www.overtake.gg

View attachment 1391186

Here's an onboard for a lap around Road Atlanta to give you an idea on how they drive

8 bucks for FM rips man that stings a bit

 

[alexfre]

Not sure if someone has answered you yet but it's the csp version, some tracks (and cars apparently) are not compatible with it for whatever reason and you'll need to downgrade to a lower version.

Thanks for the reply.
I think I'll stick with this version, maybe in the future they'll fix it.

 

[Alis_70]

@JK1977 Could you consider convert Nissan 280ZX IMSA GTX from Pcars 2 / 3 ?

 

[Schussnik]

Track has been updated to version 3.1. Use the link in the quote to get the new version.

You might want to make a backup of your existing track folder first in case you don't like the changes. I believe it is safe to drag the contents folder to the root 'assettocorsa' directory and overwrite when it asks, but I would suggest disabling and deleting any of my previous track skins first.

-- Grass texture changes. I was never very happy with how the grass looked. This version I like much better. It's the grass texture setup I made for Pittsburgh International and it looks more natural, at least on my end.

Thanks Joe.

Just one question, since there are multiple grass skin options which one is the updated one? or are they all updated? or do you mean the skins are not needed as you have updated the original/default grass?

 

[MasterFocus]

Is there a real reason why the “open wheeler” tag bs is still on?

CSP uses this flag for guessing some parameters if not set explicitly (for example, for how sparks or tyres would look, or even how car is rendered in rendering queue) by default it tries to detect this value from tags in “ui_car.json”

 

[MrLonguinha17]

The second one is Feldbergring, the third is Fonteny reverse, both by the legend FatAlfie.

Not sure about the first one but it has prominent Simtraxx branding.

Trieste

 

[les_expos]

Hi everyone, Can I install @ClimaxF1 update track patch if I add 3d trees on my tracks ?

 

[Piresdiogo]

I think it's better if you can send me your mod, because it goes from bad to worst on my side.
View attachment 1390715

Any Fix ?

EDIT : I solve

 

[dbeck49]

Is there a version of Indianapolis with the flattened curbs on the road course?

 

[Valexdrift]

Hi guys, i was surfing the net for some thew mods and i found this site that has two interesting cars, the Hipole Vento LMH and the Hipole Aria GT3, but i couldn't quite figure out how to get them, if anyone is interested to have a look here is the site:

2024 å¾é©¬æç¹æ¯HECçµç«é¦æ èµæ£å¼å¼å¯ï¼è±ªåéµå®¹å¤ç°èåèµéåï¼

åå¼ä¸å¤å§åºæ¥ï¼HEC 2024èµå£æ£å¼å¯å¨ï¼6å°Hypercarï¼7å°LMGT3å¸¦ä½ éåå¨çç»å¸èµéï¼

www.hipole.com

 

[kakauiyt]

Update day 2​

F1 2010 4.5 End of life
Fixed renault blurred rim being messed up on the rear
Fixed version number too
Fixed some carbon shaders
Fixed lotus steering wheel being completely black
Side of bridgestone tyres are more glossy juse like real life
AND
Proper cockpit, brought the cockpit model codemaster uses for F1 2011 and onward to F1 2010 cars, instead of a big black box, you have a cockpit

And Renault steering wheel has an NM map to make it look better



F1 2013 1.0 HOTFIX

Fix Mercedes and Renault engine sound being only heard on the right speaker

Fixed Lotus having the wrong driver3D.ini (so you had default kunos driver model urk)
Added ks_ferrari_F138 folder so that when you want to play with kunos F138, you have the real helmet of Alonso and Massa
Lotus green leds are DRS, to fit real life. And also it was missing a 15th led.

 

[sDmD13]

I installed some update / improvement which were shared some days ago, maybe that´s the reason for. Maybe someone else can check it too, otherwise I just delete the ext_config from your skin folder.

Edit: decreased the value of the diameter from 0.243 to 0.200 and now it´s fine.

View attachment 1389967

can u maybe share ur updated ext config with us all?

 

[racinjoe013]

Thanks Joe.

Just one question, since there are multiple grass skin options which one is the updated one? or are they all updated? or do you mean the skins are not needed as you have updated the original/default grass?

Technically, no track skin needs to be enabled. The included ones are optional for those that might like a different look. The Grass Darker one just makes the default grass slightly darker. The Grass Green one takes away the patchy grass look and makes everything lush and green.

 

[maximeerkat]

ADAC GT Master's Ford GT "TOI TOI" livery close-ish replica


!! Choose weather you want with or without AO and drag that "content" folder over to CM and install !!



I will be honest and say i have no idea what class this is i am guessing "DTM" due to the race plate but i have no idea i just skinned it. Names are not accurate i couldnt find anything online and the pictures i was skinning from were not the best quality.

this car is mapped like pee pee but its still better than the VRC Mondeo (just)

There is an ext_config in the skin folder that takes care of the brightness adjutsment so no need to mess around with shader values (i should of done this before on other uploads)

i cannot get the number 38 visible from the inside as there is no map i also cannot cover the foglights over due to mapping

Link to GT3Masters car is in the download.

ADAC GT - Master's Ford GT "TOI TOI" close (ish) replica

Car: https://mega.nz/file/T0ZGDCrC#osucHWp-fQ3d_psTFKh5hJIr3mZ3L92rmjHioAUDiK8 please install my update (if you want white headlights) after you have installed this main download first. !! Choose weather you want with or without AO and drag...

www.gtplanet.net

 

[Masscot]

@Peter Boese is there a way to rotate the sky dome and sun position to effectively correct an incorrectly-rotated track?
I know we can place the track anywhere on the planet with GPS coordinates, but is there a way to fake its orientation?
Rotating the track itself is often not practical due to things like animations getting broken, so it'd ironically be a lot easier to rotate the rest of the solar system rather than rotate the track.
If it's not currently possible, is it something that you and Ilja could consider at your next meeting of the Wizard's Guild?

EDIT: never mind, apparently it's already a feature of vanilla AC in lighting.ini the track's data folder.
SUN_PITCH_ANGLE: defines the height of the sun. 0 = top of the sky. 90 = horizon
SUN_HEADING_ANGLE: counter-clockwise rotation around the track

Thanks to @lux3y for finding this.

 

[les_expos]

Charging money for Forza models sure is a business strategy these days it seems. Should just start extracting all the Forza models and sell them on gumroad, Would make bank it appears.

Is there an easiest alternative for road car ? It very difficult to find the best mod, with the right physic and are not convert? If only there was one place with only the best mod with an easy interface ? If i want a particular car I need to go on hundred patreon, discord, telegram, reddit, facebook, assetto world, overtake. And even them I don’t know the quality.

 

[Racing Klaus]

Ford GT "TOI TOI" livery close-ish replica


!! Choose weather you want with or without AO and drag that "content" folder over to CM and install !!

I will be honest and say i have no idea what class this is i am guessing "DTM" due to the race plate but i have no idea i just skinned it. Names are not accurate i couldnt find anything online and the pictures i was skinning from were not the best quality.

this car is mapped like pee pee but its still better than the VRC Mondeo (just)

There is an ext_config in the skin folder that takes care of the brightness adjutsment so no need to mess around with shader values (i should of done this before on other uploads)

i cannot get the number 38 visible from the inside as there is no map i also cannot cover the foglights over due to mapping

Link to GT3Masters car is in the download.

ADAC GT - Master's Ford GT "TOI TOI" close (ish) replica

Car: https://mega.nz/file/T0ZGDCrC#osucHWp-fQ3d_psTFKh5hJIr3mZ3L92rmjHioAUDiK8 please install my update (if you want white headlights) after you have installed this main download first. !! Choose weather you want with or without AO and drag...

www.gtplanet.net

View attachment 1391415

View attachment 1391416

Thats ADAC GT-Masters

 

[raggetheman]

has someone edited kunos gt40 with csp lights and reflections? Ive tried myself but cant get it right

 

[maximeerkat]

Thats ADAC GT-Masters

Thanks Klaus

 

[ninezeroniner]

CSP uses this flag for guessing some parameters if not set explicitly (for example, for how sparks or tyres would look, or even how car is rendered in rendering queue) by default it tries to detect this value from tags in “ui_car.json”

I know about sparks & tyres, I just wonder what's with this thing still "tampering" normal tags behaviour when we live in the ext_config world. Just slap it there and call it GUESS_OPEN_WHEELER_JUNK: yes or no

anyway..."how car is rendered in rendering queue" now you got my curiosity, since I don't know exactly what you mean and I'm open for explanation.

 

[ClimaxF1]

Hi Guys

This should be my final update for this track.

One thing that bothered me was the track side food truck textures, have tried to update it to make them look a bit more interesting.

Have also added some more night light settings.

N.B. Deactivate skins and reactivate new skins in Content Manager for new textures to show

Update details v1.3:

• New track side food truck texture added
• Illuminated overhanging Liqui Moly banner (next to Grand Valley Speedway banner, main straight)
• Illuminated Firestone banner a bit (Pit building)
• Illiminated Gran Turismo banner a bit (Top pit building)
• Illuminated Bilstein banner and added spot lighting (track side hill)
• Updated bgr00 background loading screen as per new light settings

Update details v1.2:

• Night lighting complete rework with several new settings

• Fixed fps issue on main straight at night (caused by night lighting)
• Adjusted all light colors, ranges, fade, spot, sharpness etc.
• Adjusted all flood lights
• Adjusted all pit building lights
• Adjusted all grandstand lights
• General light settings and colors adjusted, clean, crisp with balanced and good fps performance
• Added missing light shadows around the track and set
• Added missing light tetxures around the track and set
• Added missing light textures and shadows in tunnels, set too
• Illuminated all brake markes and set
• Illuminated all turn signs and set
• Illuminated all pit signs and set
• Illuminated yellow and black corner direction signs and set
• Illuminated camera man towers a bit and set
• Illuminated tunnel entry billboard/map a bit and set
• Illuminated blue bridge textures a bit and set
• Adjusted bridge lighting
• Illuminated all tents a bit and set
• Illuminated Grand Valley Speedway banner and set
• Illuminated all track overhanging banners and set
• Illuminated food trucks a bit and set
• Illuminated pit building windows a bit and set
• New Liqui Moly concrete wall texture
• Several material adjustments added and set

- More loading screens added

Grand Valley Speedway Gran Turismo Complete Texture Update

Hi Guys Here is my complete update for Grand Valley Speedway by Lean Lauri. This is my third attempt at this track, have been struggling to get the perfect tree's combination, one cannot update this track until you get the tree's right first...

www.overtake.gg