Assetto Corsa PC Mods General DiscussionPC

[Mike173]

Hi gents, how to modify KPI and caster:

keep in mind the front caster is always negative (except on supermarket trolleys)
just play with the '2' point of the upper WB or/and the '2' point of the lower WB to set the CASTER. -6/-7 is an average value.
Points 1 and 3 of the upper WB have a lower position than the point 2, while points 1 and 3 of the lower WB have a upper position than the point 2, upper WB is always shorter than the Lower WB, all that combined with a good KPI makes the wheel when charged keeps a greater negative CAMBER

to set the KPI (in this case with DWB) just play with the '2' points of the upper and lower WB. Always to keep a negative CAMBER, the KPI must be positive. 13 is an average value.
Have fun, Mike

 

[marc magnela]

Sometimes when I follow mod updates, many things surprise me.For example, these👉View attachment 1426892
it's obvious, isn't it, or am I wrong?I have been observing these "protrusions" of the insides since the very first release.I see the same thing with the extension file.👉

I've just tried the original mod, there's the same problem and nobody's seen it.

 

[Fanapryde]

Waste of money going by their other mods. Sergio Loro's work updated, so why charge?

#edit, this one is free# so worth a try

Just gave it a run. Not 'perfect' but WAAAY better than the old version. Worth installing.

 

[nicktanjw]

Anyone knows what happened to Lore's Vintage Emporium? His Patreon is empty for some reason.

Wanted to download some of his mods.

 

[Perico Lospa]

... Is any mod ever 'final'..?

That is as true as none of us can escape death or taxes...

For my part, I apologize if at any time seemed that I was complaining about the development of the mod, that was not the intention... It's just that some of us are like spoiled, impatient children... 😅

 

[shi]

Nurburgring 1984 - 1985 v1.1

https://www.patreon.com/posts/nurburgring-1984-121175768

View attachment 1425271
Old layout of Nurburgring, Germany.
Conversion from F1 Challenge.

-CSP recommended
-2 layouts (Yearly billboards and building variations)
-36 pit/start
-AI, cam

Credits & Thanks;
F1 Challenge Track by dmarques
(VB and CMT's version with ugrades and optimizations to buildings and surroundings)

Terms Of Use (F1C);
Enjoy this mod to the fullest, that's all. If you want to convert or use this
as a base to create other cars, you're welcome in doing so as long as the
appropriate credit is given to the respective authors of the files you are
using. You can find all authors in this file

AC converted by @shi (shin956)
logo.png by @Fanapryde
Crowds texture by @Kniker97
background and some textures by kunos

Enjoy.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;
Fixed a problem with the lights on the home straight.

v1.02 changelog;
Fixed missing physical grassy areas and walls. (Thanks StoffelWaffle for the report.)

v1.1 changelog;
Fixed window transparency.
Fixed grass mapping in ext_config.
Imported tree textures from 1995.
Fixed objects flickering.
Some minor fixes.
- Thanks Mascot and M1GHTYM4VS for the report.

Nurburgring 1984 - 1985 v1.1
The link is in the quote.

v1.1 changelog;
Fixed window transparency.
Fixed grass mapping in ext_config.
Imported tree textures from 1995.
Fixed objects flickering.
Some minor fixes.
- Thanks Mascot and M1GHTYM4VS for the report.

 

[Masscot]

That is as true as none of us can escape death or taxes...

For my part, I apologize if at any time seemed that I was complaining about the development of the mod, that was not the intention... It's just that some of us are like spoiled, impatient children... 😅

Well, good things come to he who waits.
The danger with acting impatient and entitled (even in jest and especially with free mods) is that the modder might feel underappreciated, which might make them think twice about bothering next time, or at the very least keeping updates private so as not to attract negative attention. I've seen it happen plenty of times.

 

[Alguecool]

Yeah, seems like people are getting annoyed and impatient because a few of us are trying to make a really nice car even better. Not sure what to call that, but it's a really baffling attitude to have in a modding thread.
I guess in these attention-deficit days some people just want a steady stream of mediocre stuff that they'll drive once before moving onto the next one. Quantity, not quality.

If the few of us would also have time for just a few laps with the brand new physics data I gently proposed for MY Fairlady asking for feedback, for which NO ONE HERE answered, That would be great.

What, vexed ? Me ? Nooo

 

[Vintagedriver]

I see a lot of presettings from the CM Video, neckFX and CSP. Just a matter of click on that file and you get redirected to the CM website and the presetting will be installed or saved.
Like to know is how to publish my CM presets, so others can easily test my CSP/Video settings.

note: clicking “share” does nothing.

 

[noroardanto]

Hi gents, how to modify KPI and caster:
View attachment 1426898
keep in mind the front caster is always negative (except on supermarket trolleys)
just play with the '2' point of the upper WB or/and the '2' point of the lower WB to set the CASTER. -6/-7 is an average value.
Points 1 and 3 of the upper WB have a lower position than the point 2, while points 1 and 3 of the lower WB have a upper position than the point 2, upper WB is always shorter than the Lower WB, all that combined with a good KPI makes the wheel when charged keeps a greater negative CAMBER
View attachment 1426900
to set the KPI (in this case with DWB) just play with the '2' points of the upper and lower WB. Always to keep a negative CAMBER, the KPI must be positive. 13 is an average value.
Have fun, Mike

Many thanks! I really appreciate your explanation.

Edit: I have successfully set the caster to 6.843 while maintaining the trail at -1.54. However the KPI still 0.000. Can you let me know what's wrong?

 

[Alis_70]

Sometimes when I follow mod updates, many things surprise me.For example, these👉View attachment 1426892
it's obvious, isn't it, or am I wrong?I have been observing these "protrusions" of the insides since the very first release.I see the same thing with the extension file.👉View attachment 1426894View attachment 1426895it seems that those who do this don't really understand it

I agree with this ugly 3d issue, I don't understand some people want to improve some small things with this big modeling (or converting I think) issue next to ...
And we have the same with rollbar, when you look inside the car through the rear side window, there are missing 3d on the Roll bar (there is not complete pipes)

 

[Mike173]

hi gents,
For those who are interested I have prepared a compressed file of the files that I modified in the data folder. Make a backup of your files with the same name and drop mine in your data folder. Remove '.txt' extract and proceed as described. Done. the steering wheel is now well calibrated, the front wheels are no longer in contact with the fenders while turning. Have fun, its a very good mod.

 

[Mike173]

I have successfully set the caster to 6.843 while maintaining the trail at -1.54. However the KPI still 0.000. Can you let me know what's wrong?

Have a look on the second pic of my previous post, you have only two attach points with a number, 2 red and 2 yellow, just drag the 2 red to the left till you get 13~ for the KPI in the right window. that's done.
Have fun, Mike.

 

[MrHunt]

Some Tracks have a "Loading ai spline" text, this can takes several minutes to load, if i delete the ai and data folder it says "asynchronus loading" and again "Loading ai spline".

I don't understand why some Tracks have/use this, Kunos doesn't use it either, it's so annoying that I have to immediately delete all routes that use this AI spline, because of long loading times.

How can i get rid of the AI spline forever?


And has anyone a rainx_fx for H22 La Pampa?

 

[sDmD13]

question, i wanna combine some tracks together so i can have less tracks in the main track folder but after copying everything to the new folder i get a message with "layout "xy" is missing for track "z", how can i fix that?

 

[Den_88]

question, i wanna combine some tracks together so i can have less tracks in the main track folder but after copying everything to the new folder i get a message with "layout "xy" is missing for track "z", how can i fix that?

You must create the correct folder architecture in the main directory.

and don't forget about models.ini

all screenshots as an example

 

[sDmD13]

You must create the correct folder architecture in the main directory.View attachment 1426952View attachment 1426953and don't forget about models.iniView attachment 1426957 all screenshots as an example

before i asked i did exactly this but still buggy

 

[Quark67]

Malaysia

Based on the original Malaysia for rFactor by Cico76 Credits Original creators: *cico76/Kicker/Alain Fry * - modeling, texturing, scene Kicker/Alain Fry - former modeling, organisation Kicker/Alain Fry - textures

www.overtake.gg

I want hide 1WALL7_3_SUB1

It's a big mesh, you will hide it on allmost half the track... To solve the bump, you have to hide also the pillars, mesh 1WALL7_3_SUB4

 

[Masscot]

Some Tracks have a "Loading ai spline" text, this can takes several minutes to load, if i delete the ai and data folder it says "asynchronus loading" and again "Loading ai spline".

I don't understand why some Tracks have/use this, Kunos doesn't use it either, it's so annoying that I have to immediately delete all routes that use this AI spline, because of long loading times.

How can i get rid of the AI spline forever?


And has anyone a rainx_fx for H22 La Pampa?

I've noticed this 'loading AI spline' delay too, it seems to be another bad thing that came with one of the latest CSP updates. Funnily enough, it seems a lot worse the first time you load a track. After that it's a lot quicker. Maybe some file is being created the first time? IDK, but it's bloody annoying. Tracks previously used to load perfectly well and almost instantly prior to this.

 

[MasterFocus]

I see a lot of presettings from the CM Video, neckFX and CSP. Just a matter of click on that file and you get redirected to the CM website and the presetting will be installed or saved.
Like to know is how to publish my CM presets, so others can easily test my CSP/Video settings.

note: clicking “share” does nothing.

Clicking SHARE LINK FOR... at the bottom should get you this:

If it doesnt, could it be because you only have the free version of Content Manager?
Otherwise I cant see why it wouldnt work

 

[Perico Lospa]

... The danger with acting impatient and entitled (even in jest and especially with free mods) is that the modder might feel underappreciated, which might make them think twice about bothering next time, or at the very least keeping updates private...

I think that the regular forum members who frequent this thread are somehow getting to "know" each other, and we should know how to distinguish between those who participate willingly and those who like to strain the atmosphere...

Likewise, when an artist exposes his work to the general public, he is also exposed to receiving opinions, demands, etc of all kinds. It would also be desirable for us to be able to distinguish between constructive criticism and those who only criticize for the sake of criticizing... who should not be given the slightest attention.

Luckily I think there aren't here many toxic people of that kind... 😉

(DISCLAIMER: This opinion is highly personal and subjective and as such, subject to any type of criticism. Although if the criticism is negative, I won't pay any damn attention to it.)

Peace, Love and lots of Fun, pals.

 

[Vintagedriver]

Clicking SHARE LINK FOR... at the bottom should get you this:

View attachment 1426971View attachment 1426972View attachment 1426973

If it doesnt, could it be because you only have the free version of Content Manager?
Otherwise I cant see why it wouldnt work

I just wanting to write: all the links are going in my case directly to "Content Manger" --> "sharing" Strangely I do not have the last two CM message popping up, while I do have the payed version.

 

[sDmD13]

can someone maybe tell me for which hidden valley track this skin is?

Skins - Darwin Triple Crown (Hidden Valley) 2022 Sponsors V8 Supercars

Richard Lofthouse submitted a new resource: Darwin Triple Crown (Hidden Valley) 2022 Sponsors V8 Supercars - Darwin Triple Crown (Hidden Valley) 2022 Sponsors V8 Supercars Darwin Triple Crown Hidden Valley 2022 track Sponsors V8 Supercars Best i could do with footage from YouTube.... Read...

www.overtake.gg

 

[Tetri]

If the few of us would also have time for just a few laps with the brand new physics data I gently proposed for MY Fairlady asking for feedback, for which NO ONE HERE answered, That would be great.

What, vexed ? Me ? Nooo

there was SO MANY great stuff that came up last month i am barely done with the new WSC and GTC packs. I can't wait to try the Fairlady, and i'll let you know how much i loved it.

So, the version on GTplanet has the data.acd already updated or should i try the car first, then look for the physics update on this thread and install it, and then give you a feedback?

 

[Frank25]

can someone maybe tell me for which hidden valley track this skin is?

Skins - Darwin Triple Crown (Hidden Valley) 2022 Sponsors V8 Supercars

Richard Lofthouse submitted a new resource: Darwin Triple Crown (Hidden Valley) 2022 Sponsors V8 Supercars - Darwin Triple Crown (Hidden Valley) 2022 Sponsors V8 Supercars Darwin Triple Crown Hidden Valley 2022 track Sponsors V8 Supercars Best i could do with footage from YouTube.... Read...

www.overtake.gg

Hidden Valley Raceway

Conversion from rFactor. Hidden Valley Raceway is part of the Hidden Valley Motorsports Complex, located at 171 Hidden Valley Road, Hidden Valley, 10 km (6.2 mi) from Darwin, Northern Territory, Australia. It is 2.870 km (1.783 mi) long and has...

www.overtake.gg

 

[caanglin]

So rather than trying to help, you can just throw it in the trash.☹️

Or... you and a few others just missed a joke.

 

[Alguecool]

there was SO MANY great stuff that came up last month i am barely done with the new WSC and GTC packs. I can't wait to try the Fairlady, and i'll let you know how much i loved it.

So, the version on GTplanet has the data.acd already updated or should i try the car first, then look for the physics update on this thread and install it, and then give you a feedback?

That was just a silly joke after 3 (more?) pages full of upgrades toward one single car, no need for any excuse pal

But yeah, I'm still gathering feedbacks from here and there on the new bodged physics, no changes yet in the released download on RD. So : download on RD is old (bad!) physics and the data file I gave is the new (good?) physics, still in beta.
Shouldn't be long, tho. Probably this week-end.

 

[Tetri]

That was just a silly joke after 3 (more?) pages full of upgrades toward one single car, no need for any excuse pal

But yeah, I'm still gathering feedbacks from here and there on the new bodged physics, no changes yet in the released download on RD. So : download on RD is old (bad!) physics and the data file I gave is the new (good?) physics, still in beta.
Shouldn't be long, tho. Probably this week-end.

Ok i see why some complained about the car's behavior under heavy breaking. Personnally i'm gonna love it once i figure how to maintain the back a little straight.

So, i tried getting the data.acd. I opened it, saved it as an .acd file, and it crashes the car loading.

Think of me as a true autistic, not on the border of the spectrum, but at the center, overlapping every circles ever discovered, and tell me how to install the data.acd properly please

 

[ninezeroniner]

I think that the regular forum members who frequent this thread are somehow getting to "know" each other, and we should know how to distinguish between those who participate willingly and those who like to strain the atmosphere...

I'm just counting how many times you spelled Audi in your text.

 

[Alguecool]

Ok i see why some complained about the car's behavior under heavy breaking. Personnally i'm gonna love it once i figure how to maintain the back a little straight.

So, i tried getting the data.acd. I opened it, saved it as an .acd file, and it crashes the car loading.

Think of me as a true autistic, not on the border of the spectrum, but at the center, overlapping every circles ever discovered, and tell me how to install the data.acd properly please

I'll PM you