Assetto Corsa PC Mods General DiscussionPC

[pugsang]

is not my mod

and if I do what you say, I'll have the banners overlapping again.

Well no

Assetto Corsa PC Mods General Discussion

Looking hopeful - can you please share the config for the animated antenna? ACTK released version v1.0.3 this morning with the latest additions and the animated antenna, I saw it on his telegram.

www.gtplanet.net

You have to use ksPerpixel shader

 

[Alis_70]

I have suddenly stuttering (with high fps) since I have updated graphic driver. I have tried downgrade driver, restore settings (video, CSP, pure ...) without succes... Do you have any idea ?

 

[GT3Masters97]

I have suddenly stuttering (with high fps) since I have updated graphic driver. I have tried downgrade driver, restore settings (video, CSP, pure ...) without succes... Do you have any idea ?

General rule: if your AC is working well, don't touch anything, even a single fart can destabilize the cosmic balance 😂

 

[ninezeroniner]

I have suddenly stuttering (with high fps) since I have updated graphic driver. I have tried downgrade driver, restore settings (video, CSP, pure ...) without succes... Do you have any idea ?

No changes here on latest invidia driver so far, hope it helps.

 

[sab001]

Progress... (NSU 4 600, a bit manic looking)

 

[racinjoe013]

Anyone know where the vaos for RSS cars are stored or how they are created? I was fooling around with a copied version of one of them that I created in car tuner and I noticed the cockpit shadows were different. I'm trying to figure out why, but can't find any kind of reference to a vao or car shadowing anywhere.

 

[HarVee]

Quick question, how can I tell if a car has internal glass from within CM Showroom? (for CSP Rain usage?)

 

[Alis_70]

General rule: if your AC is working well, don't touch anything, even a single fart can destabilize the cosmic balance 😂

I agree but NVIDIA driver was upgraded for another game ... Not for AC.
The last time I had problems, restoring CSP settings was a solution, but here no change ...
This game make me crazy

 

[I_R_Brainiac]

Quick question, how can I tell if a car has internal glass from within CM Showroom? (for CSP Rain usage?)

Go into CMshowroom and left click on it from the inside.If you have 2 selections available(click same place multiple times) you have interior glass.If only one then it will be the outer glass.
For some stupid reason you can only select parts while on that first page.If you go into the different settings you cant select anything.Arrow back and you can select again.Annoying as hell.

 

[marc magnela]

im still learning so I have no idea how to fix this. im on 2.7p1 and have downgraded to 2.6 with same window net issue. Its completely blocking my view. Any advice? This is the ks_abarth500_assetto_corse

it comes from the .ini file automatically downloaded by CSP,
delete the file corresponding to the car in Steam\Apps\common\assettocorsa\extension\config\cars\loaded\ and deactivate the automatic download in car config (the 3 small dots)

 

[ninezeroniner]

[edit]...and deactivate the automatic download in car config (the 3 small dots)[edit]

Where would that be? TIA

 

[Fanapryde]

Where would that be? TIA

Settings > Custom Shaders Patch > cars configs (on the right hand side click the three little dots...)

 

[Perico Lospa]

it comes from the .ini file automatically downloaded by CSP,
delete the file corresponding to the car in Steam\Apps\common\assettocorsa\extension\config\cars\loaded\ and deactivate the automatic download in car config (the 3 small dots)

Settings > Custom Shaders Patch > cars configs (on the right hand side click the three little dots...)

So... I understand that they still haven't fixed the problems with those automatic updates that make elements of the tracks disappear and screw up the cars, right?

 

[marc magnela]

So... I understand that they still haven't fixed the problems with those automatic updates that make elements of the tracks disappear and screw up the cars, right?

I never activate the default download, I prefer to test it and if it doesn't work delete or edit the file.

or edit the ks_abarth500_assetto_corse.ini file and delete this:

[SIDE_NET_...]
MESHES = GEO_netSide_SUB0, GEO_netSide_SUB1
TESSELLATION = 1
CULL_MODE = NONE

 

[Fall Guy]

@marc magnela I thought 1.0.5 is the final ACTK Audi A4 update? But the windscreen issue still not solved.

 

[MrHunt]

@marc magnela I thought 1.0.5 is the final ACTK Audi A4 update? But the windscreen issue still not solved.

View attachment 1427368

I dont have this issue, 0.27p1, maybe its on your side?

 

[marc magnela]

@marc magnela I thought 1.0.5 is the final ACTK Audi A4 update? But the windscreen issue still not solved.

View attachment 1427368

for me I'm sure it comes from a CSP option, it's impossible that some have the problem and others don't, it would be a good idea to make a backup of your settings and do a complete reset of all CSP pages.

 

[Swisss]

I dont have this issue, 0.27p1, maybe its on your side?

I have the same problem with AMD and .27p1 I might even go as far as to say it looks a little worse this time but it could be me being disappointed that its still a problem after all this time.

 

[Fall Guy]

I dont have this issue, 0.27p1, maybe its on your side?

Maybe. But I don´t use too many exotic CSP settings, neither have car in my collection which has this issue, so there must be something really wrong here.

 

[marc magnela]

I have the same problem with AMD and .27p1 I might even go as far as to say it looks a little worse this time but it could be me being disappointed that its still a problem after all this time.

maybe a setting in the AMD graphics options? it seems that every time it's someone with an AMD card who has the problem
it's still one hell of a mistere

 

[marc magnela]

Maybe. But I don´t use too many exotic CSP settings, neither have car in my collection which has this issue, so there must be something really wrong here.

I've discussed this problem with ACTK, but he doesn't understand it either, for him the kspixelAT is the normal solution for trimming badges, the rest is empty with this shader as in the photo he showed me.
no reshade installed on AC? I don't use it.

 

[kakauiyt]

Hi Kakauiyt, do you have any news for updates? Thanks a lot

 

[pugsang]

At the same time kunos is using kswindscreen with alpha blend and transparent BUT who are they of course.

 

[marc magnela]

At the same time kunos is using kswindscreen with alpha blend and transparent BUT who are they of course.

it's for the inner glass that it's not for the badges it's got nothing to do with it

for cars with inside windows + separate badges, kspixelAT can be used.

take the Alfa Romeo Giulietta Veloce TCR from WSC as an example, there is the interior window in ksWindscreen and the interior badges in kspixelAT, many mods work this way.

 

[pugsang]

I rest my case. Post the final version whatever it is and anyone can set it as he prefers. This is the magic of modding

what I really do not understand is why he refuses to use the alpha blend since it is not making any problems

 

[andrea75]

@marc magnela I thought 1.0.5 is the final ACTK Audi A4 update? But the windscreen issue still not solved.

View attachment 1427368

I have the same problem here. 0.2.7 p1

 

[marc magnela]

I rest my case. Post the final version whatever it is and anyone can set it as he prefers. This is the magic of modding

what I really do not understand is why he refuses to use the alpha blend since it is not making any problems

those who have this problem can change it in CM showroom but it is not normal this shader is not normally made for that.

 

[Swisss]

those who have this problem can change it in CM showroom but it is not normal this shader is not normally made for that.

View attachment 1427396

I changed mine like in your picture and it did nothing until i edited the ext_config file in the extension folder to what is below and it cleared right up. Hope this helps everybody now with the windscreen issue

[SHADER_REPLACEMENT_...]
ACTIVE = 1
SHADER = ksPerpixel
MATERIALS = INT_WINDOWS_2
BLEND_MODE = ALPHA_BLEND
IS_TRANSPARENT = 1
CAST_SHADOWS = 0

 

[marc magnela]

So... I understand that they still haven't fixed the problems with those automatic updates that make elements of the tracks disappear and screw up the cars, right?

modifying the file solves the problem, but I've just realized that it's another CSP bug since 0.2.5, in version 0.2.4 the file works fine without modification.

one bug fixed, 10 new ones added

 

[Fanapryde]

those who have this problem can change it in CM showroom but it is not normal this shader is not normally made for that.

View attachment 1427396

ACTK/EASY released v 1.0.5:
Audi A4 Quattro STW "F302" v1.0.5 by ACTK
(Final Update)
Update ext_config.ini
Update tyres.ini
Update drivetrain.ini
Update digital_instruments.ini
Update mesh front turn signal
Update lights.ini
Fix ksWindscreen
Fix CSP wipers
Fix cast shadows
Fix collider.kn5
Add new LODs
Add Shaking Exhaust
Add animated antenna
Add reverse lights
Add refracting front and rear lights
Add main_geometry.vao-patch

No issues on my side...