Assetto Corsa PC Mods General DiscussionPC

[FrustratedUse]

I was thinking about purchasing the updated URD's EGT Pack. I've already purchased some cars in the past and I would like to complete the series. Are there any good skins for the Porsche, Corvette, and Ferrari?

MrGlide / Martinez_4313 on Overtake has an good chunk of liveries for the URD Porsche, Including anything made by Milhouse1977 should work out of the box with the updated version of all the cars bar the Ferrari & Aston.

@MS6Driver has a couple of liveries made for their Ferrari iirc.

 

[X90]

I was thinking about purchasing the updated URD's EGT Pack. I've already purchased some cars in the past and I would like to complete the series. Are there any good skins for the Porsche, Corvette, and Ferrari?

Limited skins for all new modeled GTEs - which is too bad.

I've enjoyed the Ferrari - feels literally identical to the LMU one. Which is a pretty big compliment. Huge, huge upgrade over the Yezhrod, which went right in the bin. Unfortunately, that one had about a billion skins - which the new URD could really use some of. AI seems relatively reasonable as well - which I know there were some issues with in the pack, albeit with cars I haven't driven yet. Can't speak to whether it was fixed.

I'd soured a bit on URD over the last few years but I've had a good amount of fun with what I have. I only own a smattering, as I never bought them all - but from what I can tell it's not a bad buy.

My two cents.

 

[Pete82]

Yes, I know, I said a lot of owners thought it ugly (it is!) and replaced it with a sportier Cooper version, hence my DDS which can be added to any skin if so desired. Entirely optional.

@Pete82 Apologies, I just took a closer look at the rear lights and they already do have refractions (as do the front lights). I think the brightness and/or lens colour is maybe blowing out (or killing) any refractive effect, and why I initially thought they weren't refractive. It should simply be a case of adjusting various values in the config to improve the effect?

Off:
View attachment 1484625

On:
View attachment 1484626

Diffuse is very high (0.6) on the 'brake' lens materials which is why the rear lights look odd in sunlight too (eg the clear reverse light lens glows bright white in sunlight)

I’ve always used Pure with the default Pure PP. I don’t use the Candy version because in my opinion, its colors are too saturated.
I tried to match the lights to Pure and Pure PP. My skills are quite modest — someone has always helped me.
If you’d like to improve something, I’d really appreciate it.

Keep in mind that it’s difficult to achieve a consistent look for the front, side, and rear turn lights depending on the time of day.
Take a look at the video — the brake and night lights are red; the video slightly distorts the colors.

Front always look more bright when you are on car front, but in 98% cases you always see the bulbs inside the all lamps, fog also.

 

[CMonroe]

Quite an interesting starting spot in Sergio Loro's Greenwood lol

View attachment 1484713

Woah! Where can I get the Peel?

 

[Masscot]

Changed the lights again.
Hope it´s okay now?

Schau dir mal das Bild an!

20251008-223151-shfy_studio-mby_chevy_c6_z06.jpg

www.directupload.eu

Has the latest config been shared? What I thought was the download was the link to the image hosting service. Apologies if I missed it elsewhere.

 

[Masscot]

I’ve always used Pure with the default Pure PP. I don’t use the Candy version because in my opinion, its colors are too saturated.
I tried to match the lights to Pure and Pure PP. My skills are quite modest — someone has always helped me.
If you’d like to improve something, I’d really appreciate it.

Keep in mind that it’s difficult to achieve a consistent look for the front, side, and rear turn lights depending on the time of day.
Take a look at the video — the brake and night lights are red; the video slightly distorts the colors.

Front always look more bright when you are on car front, but in 98% cases you always see the bulbs inside the all lamps, fog also.

I had a go - will send the files by PM for you and @Pilot3331 to test.
One problem with the rear lights was the very high diffuse on the lenses, making them get brighter in sunlight. Transparent lenses shouldn't get affected like solid materials, so reducing diffuse really helped a lot. I also adjusted brightness of the lights to enable the refracting lens effects be more visible.

 

[StoffelWaffle]

Woah! Where can I get the Peel?

Oh believe me you don't want it. That mod is unappeeling

 

[GT3Masters97]

Limited skins for all new modeled GTEs - which is too bad.

I've enjoyed the Ferrari - feels literally identical to the LMU one. Which is a pretty big compliment. Huge, huge upgrade over the Yezhrod, which went right in the bin. Unfortunately, that one had about a billion skins - which the new URD could really use some of. AI seems relatively reasonable as well - which I know there were some issues with in the pack, albeit with cars I haven't driven yet. Can't speak to whether it was fixed.

I'd soured a bit on URD over the last few years but I've had a good amount of fun with what I have. I only own a smattering, as I never bought them all - but from what I can tell it's not a bad buy.

My two cents.

I bought the Ford GT, the Aston Martin, and the BMW, and I have to say I've always really liked them. Perhaps only the Aston Martin has always been a bit too fast, and easier to drive than the others. This new pack has made me want to get back behind the wheel.

Regarding the skins, thanks to everyone who responded. Actually, I'd like to take this opportunity to ask another question. Is there a tool to reduce the size of the skins without manually doing it one by one? Some skins are nice to look at, but while I'm racing, I don't really care if they're in 4K or not. 👀

 

[Jezza819]

Limited skins for all new modeled GTEs - which is too bad.

I've enjoyed the Ferrari - feels literally identical to the LMU one. Which is a pretty big compliment. Huge, huge upgrade over the Yezhrod, which went right in the bin. Unfortunately, that one had about a billion skins - which the new URD could really use some of. AI seems relatively reasonable as well - which I know there were some issues with in the pack, albeit with cars I haven't driven yet. Can't speak to whether it was fixed.

I'd soured a bit on URD over the last few years but I've had a good amount of fun with what I have. I only own a smattering, as I never bought them all - but from what I can tell it's not a bad buy.

My two cents.

I do not have a Porsche 992 Cup car and I noticed URD has one. Does anybody have it? Is it good or is there a better one out there?

 

[Frank25]

You should try the Porsche 992 GT3 Cup by Guerilla Mods. It has extended physics with better tyres and so you can attack the curbs much harder without the risk of spinning.

https://www.patreon.com/posts/porsche-992-gt3-66755025?l=de

You can also find many real life skins at Overtake.

2022 Porsche Carrera Cup USA

2022 Porsche Carrera Cup North America pack of skins to Porsche 992 GT3 Cup MOD by Guerilla Mods. Please read the Info.txt

www.overtake.gg

2022 Porsche Carrera Cup Brazil 1.0

2022 Porsche Carrera Cup Brazil pack of skins to Porsche 992 GT3 Cup MOD by Guerilla Mods. Please read the Info.txt

www.overtake.gg

Resources by Pedro Lemonnier-Lopes

www.overtake.gg

Resources by Richard Lofthouse

www.overtake.gg

 

[emissary935]

Quite an interesting starting spot in Sergio Loro's Greenwood lol

View attachment 1484713

Uh, probably dumb question, but what’s your PP Filter?

 

[CMonroe]

Oh believe me you don't want it. That mod is unappeeling

Hehehe! Trust me, though... it apeels to me.

 

[FrustratedUse]

I bought the Ford GT, the Aston Martin, and the BMW, and I have to say I've always really liked them. Perhaps only the Aston Martin has always been a bit too fast, and easier to drive than the others. This new pack has made me want to get back behind the wheel.

Regarding the skins, thanks to everyone who responded. Actually, I'd like to take this opportunity to ask another question. Is there a tool to reduce the size of the skins without manually doing it one by one? Some skins are nice to look at, but while I'm racing, I don't really care if they're in 4K or not. 👀

CM has an built in compression tool you can use, It should let you choose files & folders.

 

[SVRS]

You should try the Porsche 992 GT3 Cup by Guerilla Mods. It has extended physics with better tyres and so you can attack the curbs much harder without the risk of spinning.

https://www.patreon.com/posts/porsche-992-gt3-66755025?l=de

You can also find many real life skins at Overtake.

2022 Porsche Carrera Cup USA

2022 Porsche Carrera Cup North America pack of skins to Porsche 992 GT3 Cup MOD by Guerilla Mods. Please read the Info.txt

www.overtake.gg

2022 Porsche Carrera Cup Brazil 1.0

2022 Porsche Carrera Cup Brazil pack of skins to Porsche 992 GT3 Cup MOD by Guerilla Mods. Please read the Info.txt

www.overtake.gg

Resources by Pedro Lemonnier-Lopes

www.overtake.gg

Resources by Richard Lofthouse

www.overtake.gg

Thank you for the introduction. I didn't expect this 992 GT3 Cup car to be so much more comfortable than the P92 F6, just like you said: I can attack the curbs much harder without the risk of spinning!

I am preparing to give up driving the P92 F6.

 

[jus1029]

 

[X90]

I do not have a Porsche 992 Cup car and I noticed URD has one. Does anybody have it? Is it good or is there a better one out there?

The best one out there by far. The Guerilla has too much grip and is too simplistic to drive. The AI is also too slow - a recurring problem with nearly all of their cars that they don't seem to have any interest in fixing.

The URD one is bang on. Great sounds, FFB, physics and visuals. Feels like an evolution of the Kunos cup car, which is a good thing. One of my 3 favorite cars from them.

I don't hate the Guerilla car, it has its charm and it pops up in LFM, but it's not in the same league IMO.

 

[GT3Masters97]

CM has an built in compression tool you can use, It should let you choose files & folders.

yes yes I know the tool, but I mean something that reduces the resolution, not so much the file size

 

[Vintagedriver]

Woah! Where can I get the Peel?

De Piel 😏 can be found at this site https://assettoland10.wixsite.com/assettoland/other The original seems to be from Legion.

 

[StoffelWaffle]

Uh, probably dumb question, but what’s your PP Filter?

Standard Pure PP filter (and weather condition set as windy)

 

[emissary935]

Standard Pure PP filter (and weather condition set as windy)

Nice, thanks for answering. My Pure PP filter never looked that vibrant

 

[24H]

Has the latest config been shared? What I thought was the download was the link to the image hosting service. Apologies if I missed it elsewhere.

here it is

 

[Kurt Woods]

I made a little update to some of the signage and billboards for jr_road_atlanta_2022 track as a skin for the 2025 IMSA Petit Lemans.
Nothing fancy just a few images as seen in these screens. If you're an IMSA fan, you may like it.
https://mega.nz/file/C9YV0LCZ#CrCM6js5ByBqEhA34TocpU8HUn5WcXo-tPEo8VCr4YA

 

[Pilot3331]

Hi. Some news about content manager. Its tire size generator may display wrong sizes. This led me to believe mini car model size is wrong.
This bug is reported to Ilja, thanks to @Pete82. Ilja's response was: "ok, i will work on it".
While we wait for a fix i recommend not tot relay on cm for tire size calculations and do this manually from formula provided on overtake. Here is Link.

 

[Masscot]

here it is

Thanks!
Just tested it and the rear lights seem to turn off after pressing the brake a few times.
Anyone else having this issue?
Very weird!

Edit: they can turn off randomly by themselves too, no brake pedal needed. And flicker on and off. Odd!
I guess there might be conflicting instructions in the config somewhere? Maybe duplicated or something?

 

[RMi_wood]

question to fellow modders:
when modding a car or track and using photo/video references, do you ever try to rotate/pan the image like you are in a 3d program?
Yeah me neither...

 

[Perico Lospa]

... owhen modding a car or track and using photo/video references, do you ever try to rotate/pan the image like you are in a 3d program?...

I don't do mods, but I've occasionally tried inadvertently to zoom in on an image to see details by pinching it with two fingers... when reading magazines of good old-fashioned paper. 😅

And no, these weren't Playboy issues; touchscreens didn't exist back then...

 

[MaxSTDTDesign]

Hey, yep working on a B98/10, scratch made
View attachment 1481678
View attachment 1481680View attachment 1481679

Some more WIP Shots of the B98/10

 

[monyx]

The URD one is bang on. Great sounds, FFB, physics and visuals. Feels like an evolution of the Kunos cup car, which is a good thing. One of my 3 favorite cars from them.

Comparing the Protech F92 F6 it just didn't have the ability to steer on throttle and get turn-in with weight transfer like the URD. I have replicated what I could from the URD set-up to the Protech and returned expected traits & agility, my CM set-up here for the Protech F92 F6:
https://acstuff.club/s/zgBM

 

[andrevr]

I don't do mods, but I've occasionally tried inadvertently to zoom in on an image to see details by pinching it with two fingers... when reading good old-fashioned paper magazines. 😅

And no, these weren't Playboy issues; touchscreens didn't exist back then...

I've done this. Oh, the shame if you get seen doing it. Ask me how I know

 

[MasterFocus]

Hi. Some news about content manager. Its tire size generator may display wrong sizes. This led me to believe mini car model size is wrong.
This bug is reported to Ilja, thanks to @Pete82. Ilja's response was: "ok, i will work on it".
While we wait for a fix i recommend not tot relay on cm for tire size calculations and do this manually from formula provided on overtake. Here is Link.

I use this, as it uses the formula on that post:

Asseto Corsa wheel size calculator

The Wheel Size Calculator is a user-friendly tool designed to calculate the overall radius of a car wheel based on the tire dimensions provided by the user. This tool is particularly useful for Asseto Corsa and ouputs the text ready to be pasted...

www.overtake.gg