Assetto Corsa PC Mods General DiscussionPC

[Perico Lospa]

The car is available for download.

For users who missed my previous posts, car have placeholder physic data which need to be rework. Other than that it is fully working.

View attachment 1532074View attachment 1532075

K

Alfa Romeo 75 Turbo Evoluzione

Apr 24, 2026

WTCC 1987 homologation special

• k_p
• Cars

I think I have a gremlin inside my computer; lately I've been experiencing a lot of strange behavior with some new mods.

With this Alfa (which looks great graphically, by the way), when is loading, the screen freezes black for a moment, there's a clap of thunder and when the image starts to appear, it renders like in layers: first black shadows, then storm clouds appear that quickly transform into a sky with few clouds (which is how I have the session set up), the AI cars start leaving the pits, with the image moving jerkily, and finally everything seems to stabilize... although the AI cars stops a few meters away in the middle of the track...

I don't know if anyone else is experiencing something similar... If not, I think I'm going to have to perform an exorcism on my PC...

 

[Pilot3331]

Hi.
BOP update for M3 GT3 to make it a bit more competitive.
New factory color skin thanks to @demankz.
Download.

 

[Perico Lospa]

I think it is loaded every time you start because you set it in CM to be loaded automatically?
View attachment 1531668

... I think yes, I do have set the car configs to load automatically; I'll try to take a look and test as soon as I can...

Well, out of scientific curiosity, I finally tried disabling the automatic config installation, deleting the corresponding file from the "loaded" folder, and reinstalling the @GT3Masters97 extension. And although the exterior looks gorgeous... the car still appears missing half its parts, as if it had been left parked in a dodgy neighborhood. That's why I tried the suggestion of @Pilot3331...

Hi. So mystery is solved by looking at those lines:
View attachment 1531750this tells csp to hide and replace some cockpit elements. but replacement file misc.kn5 is not provided. So if You want to replace things include kn5 file too. If You don't have it and not intending to replace anything set ''active = 0''

...which has solved the problem of the missing parts and allows to enjoy the excellent new shading...🙂 although another of my recurring problems has reappeared, which is that the reflection of the brake lights of the cars in front of me appears about half a meter lower than where they should be, almost on the ground...☹️

I think in this case, I'm going to cowardly surrender...😒

 

[ancient_3]

Hi friends,

Here are the two March 881 for MP 4/4 syncmaster version

Resource icon

MP 4/4 Syncmaster March Skin

Apr 24, 2026

Skin MP 4/4 1988 F1 March

• ancient_3
• Skins

The available grid F1 1988 for this MP 4/4 version:

already available:
Lotus ( Piquet + Nakajima)
Tyrrell ( Palmer + Bailey)
Williams (Mansell + Patrese)
Mclaren ( Prost + Senna)
Ligier (Arnoux + Johansson)
Ferrari (Alboreto + Berger)

and added :
Benetton (Nannini + Boutsen)
Leyton House / March (Gugelmin + Capelli)

With the two Benetton skins, that was quite an adventure for a n00b in skins like me, can't say that I'll do it again (****ing Gugelmin helmet lol) but learned a bunch of things with Blender + GIMP for AC modding, will get back one day to Rouen-les-Essarts track with this new knowledge :-)

 

[GT3Masters97]

Well, out of scientific curiosity, I finally tried disabling the automatic config installation, deleting the corresponding file from the "loaded" folder, and reinstalling the @GT3Masters97 extension. And although the exterior looks gorgeous... the car still appears missing half its parts, as if it had been left parked in a dodgy neighborhood. That's why I tried the suggestion of @Pilot3331...

...which has solved the problem of the missing parts and allows to enjoy the excellent new shading...🙂 although another of my recurring problems has reappeared, which is that the reflection of the brake lights of the cars in front of me appears about half a meter lower than where they should be, almost on the ground...☹️

I think in this case, I'm going to cowardly surrender...😒

Can you post a screenshot? We can't surrender!

 

[Pilot3331]

Well, out of scientific curiosity, I finally tried disabling the automatic config installation, deleting the corresponding file from the "loaded" folder, and reinstalling the @GT3Masters97 extension. And although the exterior looks gorgeous... the car still appears missing half its parts, as if it had been left parked in a dodgy neighborhood. That's why I tried the suggestion of @Pilot3331...

...which has solved the problem of the missing parts and allows to enjoy the excellent new shading...🙂 although another of my recurring problems has reappeared, which is that the reflection of the brake lights of the cars in front of me appears about half a meter lower than where they should be, almost on the ground...☹️

I think in this case, I'm going to cowardly surrender...😒

I had brake disk glow problem, but slightly different. It was glowing to much and to big, like You can see from huge distance car in front had brake disc glow. This turned out to be csp bug and it fixed itself with more recent versions.

 

[Nuttyboy812]

@Nuttyboy812 would you consider sharing your updated version of this mod?

I'll be uploading it as a whole mod once I finish improving it across the board (with whatever that entails, if and when I finish) but the optimized kn5 I have uploaded here. It's still almost 160mb because as I recall there's some textures in there that are too big and shouldn't be, but I haven't gotten to that part yet. The optimized mesh is based on my UV "fix" and as I recall all your skins were made with that fix in mind, so you won't have to bother flipping anything back around. If anybody has ideas for more improvements to this car I can look into, feel free to ask, or if you want to contribute something, let me know.

DOWNLOAD LINK

 

[Masscot]

Thanks for that, man! 3 ACE cars within one week.

What are the other two?

 

[petercrill]

Dodge Viper SRT10 ACR-X 2010 Public Release!!

Download: https://www.mediafire.com/file/x0m4ionuvaohckl/viper_acrx_2010_101creative.rar/file
Converted From FH1
-AO inside and out
-Realistic Dashboard
-Realistic Physics
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal

 

[Perico Lospa]

Can you post a screenshot? We can't surrender!...

Yep! Sorry for the images quality...

I had brake disk glow problem, but slightly different. It was glowing to much and to big, like You can see from huge distance car in front had brake disc glow. This turned out to be csp bug and it fixed itself with more recent versions.

I have too...

I'm still on version 0.3.0 p342... Do you mean that with the latest updates, the brake disc fireball no longer appears?

 

[Kwara]

Pellicole adesive originali per la splendida Alfa Romeo 75 Evoluzione:

 

[Pilot3331]

Yep! Sorry for the images quality...

View attachment 1532193

I have too...

View attachment 1532183

I'm still on version 0.3.0 p342... Do you mean that with the latest updates, the brake disc fireball no longer appears?

Im on p361 version, i don't see those fireballs anymore. But i thought they disappeared for me even on few versions before that. So now im unsure maybe i changed some csp setting and that's fixed it for me. Anyway try to update for latest version it definitely fixed preview problems and i don't notice any new bugs compare to p342.

 

[GT3Masters97]

Ferrari 250 GTO has been Gran Turismo‑ified!

I believe this will be the last single update, in the future I'll create packs in order to create fewer posts As always, throw the extension folder in the 250 GTO main folder (hopefully no problems this time LOL). In this case you'll find the ext_config.ini file and a .kn5 file, I had to modify and separate some parts in order to implement shaders and lights correctly.

@Perico Lospa try switching to another csp version.. It's plausible that the intensity of some effects is out of whack for everyone's configurations, everyone has their own settings. I can't think of any other solutions right now. Let me know if this solves the problem mate

EDIT: the lights doesn't work in LODS, I tried to fix it but no luck (there's always a problem😣 )

EDIT 2: fixed, I didn't noticed Kunos renamed differently the body mesh in the lods

 

[Sun Solaris]

Well I fixed my AC loading issue and now I have another one, this one I've tried tweaking several settings for and still having issues here. No idea what to do here does anyone have any suggestions please?

 

[Fall Guy]

What are the other two?

The Alfa GTAm and the Alpine 110S made by @blackbolt2017

 

[Masscot]

The car is available for download.

For users who missed my previous posts, car have placeholder physic data which need to be rework. Other than that it is fully working.

View attachment 1532074View attachment 1532075

K

Alfa Romeo 75 Turbo Evoluzione

Apr 24, 2026

WTCC 1987 homologation special

• k_p
• Cars

Thanks for this. Great car, looking forward to the new physics. I did a couple of tweaks if you want to test them. Might mainly be good for VR users or if you drive pancake in first person with the driver visible.

1. Attached is a new shift animation (no more exaggerated loop, and closer to the gearknob) and driver rescale/reposition to get his hands on the steering wheel rim when turning. Remove the .txt extensions and place in the 'animations' folder.
Disclaimer: Kunos driver postures don't like high t-bar steering wheel designs like the one in this Alfa, so the thumbs clip through this a little. But it's a necessary compromise to get the hands on the rim when turning, which is much more important (in VR, anyway).
Important: change LOCK to =320 in data/driver3d.ini to also synch the hands better with the rim rotation.

2. There's a lot of daylight leakage around mesh seams on the dashboard, door cards and A-pillars, so add this to the config to fix that:

;stop sun ingress around cockpit mesh seams, into footwells etc
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = EXT_PLASTIC_BLACK, EXT_BODY;external bodywork, trim, pillars, dashboard etc
CULL_MODE = DOUBLESIDED
CAST_SHADOWS = 1
DOUBLE_FACE_SHADOW_BIASED = 1

One more observation: for me (latest CSP, latest Pure LCS, Pure PPF) the dashboard instrument emissive glow seems overly bright. is anyone else getting this?
This is in daylight - at night of course, it's even brighter:

Anyway, hope that helps. Feel free to ignore.

 

[JK1977]

Irmscher Skin (WiP)

 

[Fall Guy]

Thanks for this. Great car, looking forward to the new physics. I did a couple of tweaks if you want to test them. Might mainly be good for VR users or if you drive pancake in first person with the driver visible.

1. Attached is a new shift animation (no more exaggerated loop, and closer to the gearknob) and driver rescale/reposition to get his hands on the steering wheel rim when turning. Remove the .txt extensions and place in the 'animations' folder.
Disclaimer: Kunos driver postures don't like high t-bar steering wheel designs like the one in this Alfa, so the thumbs clip through this a little. But it's a necessary compromise to get the hands on the rim when turning, which is much more important (in VR, anyway).
Important: change LOCK to =320 in data/driver3d.ini to also synch the hands better with the rim rotation.

2. There's a lot of daylight leakage around mesh seams on the dashboard, door cards and A-pillars, so add this to the config to fix that:

;stop sun ingress around cockpit mesh seams, into footwells etc
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS = EXT_PLASTIC_BLACK, EXT_BODY;external bodywork, trim, pillars, dashboard etc
CULL_MODE = DOUBLESIDED
CAST_SHADOWS = 1
DOUBLE_FACE_SHADOW_BIASED = 1

One more observation: for me (latest CSP, latest Pure LCS, Pure PPF) the dashboard instrument emissive glow seems overly bright. is anyone else getting this?
This is in daylight - at night of course, it's even brighter:

View attachment 1532216

Anyway, hope that helps. Feel free to ignore.

Have you tried the alternative lcs extension he brought with the car? I think gamma is the default one.

 

[Perico Lospa]

... now im unsure maybe i changed some csp setting and that's fixed it for me. Anyway try to update for latest version it definitely fixed preview problems and i don't notice any new bugs compare to p342.

... try switching to another csp version.. It's plausible that the intensity of some effects is out of whack for everyone's configurations, everyone has their own settings. I can't think of any other solutions right now. Let me know if this solves the problem mate...

Thanks for your suggestions, guys. I've always suspected that the cause of those glows is some CSP setting; although I've tweaked them a little on ocassion, I think I let pretty much as they are by default... I'll do some more testing and see what happens.

Thanks again! 😉

 

[Masscot]

Have you tried the alternative lcs extension he brought with the car? I think gamma is the default one.

Yep, emissives looked the same.

AC HONDA NSX CONCEPT-GT 2016 - Svyatoslav Gridin

Convert from gt sport/7 Physics/modelling/csp - vityaz Some help with acquiring model - F302 Sound - Neko Taisen

boosty.to

nsx is out yippie yippie happy happy

Can't download it without handing over personal info.
Got a direct download link please?

 

[Gabriele]

So you need to either ask somebody to do a UV map or move on to the next car. I have never seen a car without a wire frame but that does not mean they do no exist.

Have you pressed "view mapping?". forget about "calculate AO" what about view mapping? what does that show you?

I might be wrong but since you work with paint.net open the file and then at adjustment menu find invert Alpha and click it. Also you can choose "save as" the png file and save it as dds file

@Gabriele If you have a plain black image, click on the arrow on either side of the screen. this should bring up the basic AO to begin making a template for a skin. If there is no save button on this screen, what I've done is take a snippit of the image and copy it to your Paint.net, crop it and save it as whatever you want, usually the top layer of a template as 'multiply' properties and everything else on layers below with basic paint as the bottom layer.

I managed to make the skin: it's not perfect, but it's fine for my personal use.😁
But now I have another problem...😅😅
Lancia D24 Sport from "Legion" (I think it's an updated version of the Velo mod): if I race alone in a test session, the mod works, but if I try to use it in a race with other cars, the game crashes. Csp 0.3.0p338

 

[MrHunt]

Yep, emissives looked the same.


Can't download it without handing over personal info.
Got a direct download link please?

View attachment 1532235

Delete the ext_config.ini and rename the ext_config_lcs.ini to ext_config.ini, thats it all fine for me.

 

[Apocalypse211]

Hi friends,

Here are the two March 881 for MP 4/4 syncmaster version

Resource icon

MP 4/4 Syncmaster March Skin

Apr 24, 2026

Skin MP 4/4 1988 F1 March

• ancient_3
• Skins

The available grid F1 1988 for this MP 4/4 version:

already available:
Lotus ( Piquet + Nakajima)
Tyrrell ( Palmer + Bailey)
Williams (Mansell + Patrese)
Mclaren ( Prost + Senna)
Ligier (Arnoux + Johansson)
Ferrari (Alboreto + Berger)

and added :
Benetton (Nannini + Boutsen)
Leyton House / March (Gugelmin + Capelli)

With the two Benetton skins, that was quite an adventure for a n00b in skins like me, can't say that I'll do it again (****ing Gugelmin helmet lol) but learned a bunch of things with Blender + GIMP for AC modding, will get back one day to Rouen-les-Essarts track with this new knowledge :-)

View attachment 1532177


View attachment 1532178

Nice. But what is "Syncmaster version"? Are these for SD 1988 cars?

 

[Masscot]

Delete the ext_config.ini and rename the ext_config_lcs.ini to ext_config.ini, thats it all fine for me.

Yep, that was the first thing I tried, but emissives are still as bright as in the image I posted. Weird.
I've noticed some cars (not all) now have very bright rev LEDs, brake lights etc, when they were normal before recent CSP/Pure updates. Anyone else?

 

[Perico Lospa]

... I've noticed some cars (not all) now have very bright rev LEDs, brake lights etc, when they were normal before recent CSP/Pure updates. Anyone else?

... and odometer display digits slightly brighter than convenient, in my case, but I´m on Pure Gamma.

... Anyway try to update for latest version it definitely fixed preview problems and i don't notice any new bugs compare to p342.

Updated to the latest CSP version and nothing changed; in certain mods, misplaced brake light fireballs and brake light reflections still appear... 🙄

 

[greunix]

Thanks for your suggestions, guys. I've always suspected that the cause of those glows is some CSP setting; although I've tweaked them a little on ocassion, I think I let pretty much as they are by default... I'll do some more testing and see what happens.

Thanks again! 😉

Hi,
disable "Distant lights glare" fixed it for me (or update to latest CSP).

 

[VR Sim Racer]

Yep, that was the first thing I tried, but emissives are still as bright as in the image I posted. Weird.
I've noticed some cars (not all) now have very bright rev LEDs, brake lights etc, when they were normal before recent CSP/Pure updates. Anyone else?

I had the same, I talked to Peter and he told me to turn down the Glare on the Settings-Assetto Corsa-Video screen. I found in VR that setting it to Medium reduces the glow but I still had to go into the Pure app Lights tab and scroll down to the Emmisive setting and lower it from 1 to 0.05.

 

[Fall Guy]

Yep, that was the first thing I tried, but emissives are still as bright as in the image I posted. Weird.
I've noticed some cars (not all) now have very bright rev LEDs, brake lights etc, when they were normal before recent CSP/Pure updates. Anyone else?

Go in pure config app, press reset to defaults. What happens then?

 

[Masscot]

Go in pure config app, press reset to defaults. What happens then?

I'll try that if the suggestion above doesn't work. Ta!

 

[Quark67]

Hi. So mystery is solved by looking at those lines:
View attachment 1531750this tells csp to hide and replace some cockpit elements. but replacement file misc.kn5 is not provided. So if You want to replace things include kn5 file too. If You don't have it and not intending to replace anything set ''active = 0''

DETHLESS had done a fix and update for Alfa Romeo 4C which included that file. Unfortunately is not available anymore on RaceDepartment (but I have a backup 😁)

And this was the description:

• Recreated wiper animation cause old one was laggy and jittery & added wiper trace config
• Reworked gauge texture. Removed all noise, recreated some parts cause the quality was overall low
• Added second screen to main gauge. It comes with a working Gmeter.

Accent colors switch from red to yellow like irl.
The animation is binded to tc level 3/3 and turned off tc. (Picture 5)

• Fixed hole in right gauge mesh + remapped it (Picture 2)
• Water & oil temperature bars on main gauge are also working now
• Added display to center console. (Picture 3)

It shows a simple digital clock.
The plastic surround it is now glossy like irl
- Added a second screen to center console. (Picture 4)
It works as boot screen and appears only on start for some seconds

• Remapped license plate light mesh & added light config for them (They were just black before)
• Added main & trip odometer
• Added warning lights via texture & customemissivemult. 16 warning lights for:

-ABS off
-TC off
-TC in action
-Airbag
-Passenger airbag
-Seatbelt
-Headlights
-Highbeam
-Handbrake
-Indicators for left and right turn signal
-Speedlimiter (active in pit)
-Frost warning (ambient temp. below 3 degree)
-Low tyre pressure
-Open driver door (if you open it with csp debug app and automatically triggered at every game start)
-Oil pressure

• Added internal glass to rear glass (engine cover, picture 1)
• Added shaking exhaust & exhaust smoke
• Added pbr materials to aluminium, plastic, carpet, leather, glass & carbon
• Binnacle and part of center console are now in carbon
• Added missing LEDs to center console. 2 of them are binded to custom inputs:

-Red LED for enabled rear fog light
-Red LED for locked doors (turns off if you open the driver door with the csp debug app)

• Added turn signals to rear, front and sides with custom glows
• Added lights to interior decals with working hazard decal & gear Indicators on center console (R, N & gear 1 light up white if triggered)
• Added more csp features like brakediscfx, wobbly wipers, deforming hood, emergency brake lights etc.
• Fixed turbo bar. 1 bar wasn't working and always visible
• Added arrow next to gear digit on main gauge which work as "gear up" indicator
• Added rear fog light (mesh + glow, binded to extra key A)
• Some shader adjustments and other minor things

INSTALLATION:
1. Move files from the zip to your assetto corsa root folder and replace if asked.
You can still use the car online!

Known bugs:
Clock on center screen doesn't work sometimes
Highbeam indicator is overexposed increase your FOV to fix it)

In case you are facing very bright interior parts, try to rename the vao patch located in assettocorsa>extension>vao-patches-cars from "ks_alfa_romeo_4c.vao-patch"
to
"ks_alfa_romeo_4c.1vao-patch".