Assetto Corsa PC Mods General DiscussionPC

[StoffelWaffle]

View attachment 1541330
View attachment 1541331

AssettoNASCAR... 👀👀

If these are the same cars I think of they're squished lol , had to resize them in Blender so they'd look on par with the GT5 CoT that was released this month

(left : resized - centre : GT5 CoT - right : base model)

 

[Th3cosmic_]

no no those are the SRC cars - Totally different model from me.
Unfortunate we have to release the same car, ive been working on this for months and i bet he worked hard for it too.


I'm curious tho - where did you find the Gen 5 CoT?

 

[StoffelWaffle]

no no those are the SRC cars - Totally different model from me.
Unfortunate we have to release the same car, ive been working on this for months and i bet he worked hard for it too.


I'm curious tho - where did you find the Gen 5 CoT?

It's on Loganmanex's discord and it was ported by MacedoSTI

 

[ales100i]

Good afternoon everyone!

Does anyone have this Barrichello's Stock Car? The link is not working.

It's this one I think. The 2017 version of the car:

PC Post in thread 'Assetto Corsa PC Mods General Discussion'

Jul 10, 2020

And for the lovers of the Brazilian stock cars: Zombieboy (from F1 Classic forum) passed me the link for a car he has been doing some work on (replaced the sfx, made it a single-make series - as Stock Car Brasil was in 2017.
I have not tried it yet in its present state, but he says everybody is free to make other improvements...

https://www.mediafire.com/file/5jwnwp6qrtlt10o/ag_chevrolet_cruze_sotckcar.rar/file

• Fanapryde

Link does not work, but you can download it from here:

Chevrolet Cruze Stock Car 2017 | Assetto World

Download, install and enjoy this Chevrolet Cruze Stock Car 2017 Assetto Corsa mod instantly for free. ag_chevrolet_cruze_sotckcar

www.assettoworld.com

But i personaly like 2019 car better:

Chevrolet Cruze Stock Car Brazil 1ST RaceCar 2019 | Assetto World

Download, install and enjoy this Chevrolet Cruze Stock Car Brazil 1ST RaceCar 2019 Assetto Corsa mod instantly for free. 1st_racecar

www.assettoworld.com

 

[Th3cosmic_]

Thanks StoffelWaffle - i'll check it out

 

[machbuster]

Remove the .txt and put the file into the car´s main folder. Also, make sure the car´s folder name is not in capital letters, otherwise CM does not register any driven distance.

Hello!

Thank you so much for your help.

Thank you so much.

 

[Andrey_A]

Update on BR ENGINEERING BR1 for AC. Cockpit model is done, and some other things like Gibson exhaust, brake duct tape, few changes on high and low downforce aero kits. No textures for now, maybe i will do it in June, need a bit of rest, but i will post something in June for sure.

Higher resolution images https://flic.kr/s/aHBqjCVq13

 

[chrisracer]

I noticed someone released the 2010 Honda Fit. Can someone do the skin from my B Spec racer? 2015 and 2016 NEDiv B Spec Champion car.

 

[sDmD13]

question, can i somehow have 2 copies of ac on diffrent directories installed and then switch between both content files for content manager?
i mean i have one drive with all my current good content i have gotten over the past years and i dont delete my sorted out „bad“ content directly. i have put it on a spare drive and sometimes i wanna check if there is some gold of them which i might need for other content

 

[Jeroen V]

I've got pink wheels on all skins on LOD B ... ?

Here too unfortunately, thus seems not related to CM/CSP/PP, etc.
Someone with more knowledge will be able to fix this? (On this otherwise enjoyable car (with engine sound changed though).

 

[Andrey_A]

Update on BR ENGINEERING BR1 for AC. Cockpit model is done, and some other things like Gibson exhaust, brake duct tape, few changes on high and low downforce aero kits. No textures for now, maybe i will do it in June, need a bit of rest, but i will post something in June for sure. View attachment 1541392

Higher resolution images https://flic.kr/s/aHBqjCVq13

Noticed few mistakes i did while making those images, some parts of the car are missing, and some on the wrong side, I'll fix it.

 

[Masscot]

Bro acts like the creator couldn't fix it in no time

Really? If he is indeed capable and it really takes no time, then maybe ask Fenryr why he never fixes z-fighting on any of his extensions. All of them are littered with it, and it rather spoils the experience.
He just places new meshes and textures directly on top of existing ones, then ignores the resultant flickering.
Pyyer's track extensions all have exactly the same problem too.

 

[Quark67]

question, can i somehow have 2 copies of ac on diffrent directories installed and then switch between both content files for content manager?
i mean i have one drive with all my current good content i have gotten over the past years and i dont delete my sorted out „bad“ content directly. i have put it on a spare drive and sometimes i wanna check if there is some gold of them which i might need for other content

You can try pressing the "Change" button near the option "Assetto Corsa folder" in "CM/Settings/Content Manager/General".

 

[ManuR94]

File on MEGA

mega.nz

Hi everyone,

I'm currently working on this track, but I honestly don't know how to continue. I can't get it to work properly — it keeps throwing errors over and over again. I have the feeling that something is missing, but I can't figure out what it is.

Has anyone dealt with something similar before or knows what I might be overlooking? Any help would be greatly appreciated.

Thanks

 

[Den_88]

File on MEGA

mega.nz

Hi everyone,

I'm currently working on this track, but I honestly don't know how to continue. I can't get it to work properly — it keeps throwing errors over and over again. I have the feeling that something is missing, but I can't figure out what it is.

Has anyone dealt with something similar before or knows what I might be overlooking? Any help would be greatly appreciated.

ThanksView attachment 1541557

Of course there will be an error. After all, the "data" folder doesn't contain critically important things like surface.ini.

Besides, if there is no separate "physical" mesh for all surfaces, then the name clearly doesn't sound like 1ROAD_

 

[BruceD]

File on MEGA

mega.nz

Hi everyone,

I'm currently working on this track, but I honestly don't know how to continue. I can't get it to work properly — it keeps throwing errors over and over again. I have the feeling that something is missing, but I can't figure out what it is.

Has anyone dealt with something similar before or knows what I might be overlooking? Any help would be greatly appreciated.

ThanksView attachment 1541557

Track tutorial

Follow this tutorial and download the asset file, it'll help you out

 

[Andrey_A]

Number of dive planes will be adjustable from 0 to 2 on both high and low downforce. And two more images with fixed missing parts. https://flic.kr/s/aHBqjCVq13 Cockpit is also fixed, but it's very small things. I'll post again after some decent progress.

 

[RMi_wood]

as a funny note, you can launch a track with no sub-folders as long as the track has a AC_PIT_0 without error
and if your pit cube is on a collideable mesh, the car will load and drive.

 

[ManuR94]

Of course there will be an error. After all, the "data" folder doesn't contain critically important things like surface.ini.

View attachment 1541560

Besides, if there is no separate "physical" mesh for all surfaces, then the name clearly doesn't sound like 1ROAD_

Thanks to everyone, I was able to make it work, it changed the name of the "instance" but not the object, I continue with the conversion, I have to review how to divide the mesh, I would think that with 3d simed I can, I have some idea about blender, more info soon.

 

[RMi_wood]

big tip#383
after you are finished with 3dsim...
1. save as kn5
2. export the kn5 to fbx with CM (or kn5conv) !! do not use 3dsim to export fbx !!
3. run that fbx in ksEditor, save as kn5
4. load that kn5 bac into 3dsim and continue editing (things will now be split)
5. trust me

 

[Rivanov]

ANyone else have issues with the latest CSP and Fenryr's Nordschleife?
The track disappears momentarily on specific locations. After a few seconds it shows again.

 

[Fall Guy]

ANyone else have issues with the latest CSP and Fenryr's Nordschleife?
The track disappears momentarily on specific locations. After a few seconds it shows again.

Disable chunks optimization?

 

[Quark67]

Yesterday I decided to improve Autodromo de Antioquia by balamacab found on OT.
To install the mod, open the archive and copy the content to the track folder.

Added:

• LightsFX
• RainFX
• GrassFX
• Live displays
• crowd (by Kniker97)
• SeasonsFX (just to give it a try)

and some other fixes.

 

[Pilot3331]

Hi.
Big update for Alfa 75 IMSA.
Thank You all for feedback, it was used to make a better version of this fantastic car.
You will find it Here.

 

[vityaz]

AC PORSCHE 992 GT3 R EVO - Svyatoslav Gridin

v1.1 My favorite project so far This car combines in itself: -csp physics -rennsport model and level of detail -lcs texture features ...which wasn't possible without help form TurnOne community and in particular Ryan (The Canadian Ryan Cooper) Feel free to create skins for this mod I...

boosty.to

THE PORKCHOP IS OUT

 

[Red_Manuel]

Pilot3331
​

First thing first, thanks for the incredible work!

Some feedbacks for the car:

• The car should have one only wiper instead of two, as you can see in the attached image.
• Can we have additional headlights that can be added/removed for night runs?
• Possibly openable doors?

 

[ManuR94]

After about 3 hours of checking and tweaking things, I got it working. It counts the lap, the trees and grass have been trimmed, and I'm having trouble with pit lane. What's its real name? It counts the hotlap. More updates soon... I considered using a circuit, but the only way to learn is by failing again and again, so it's a conversion from scratch...
Does it need more work? A LOT.

56.49 MB file on MEGA

mega.nz

 

[Pilot3331]

Pilot3331​

​

First thing first, thanks for the incredible work!

Some feedbacks for the car:

• The car should have one only wiper instead of two, as you can see in the attached image.
• Can we have additional headlights that can be added/removed for night runs?
• Possibly openable doors?

Hi. No problem.
I know about wipers, it's animation rework that stopper from changing to 1 wiper.
It looks like additional lights are integrated in front bumper, this bumper model is not included with car model, and it's not possible right now to make it. So this option is off the list for now.
Wiper and doors could come in future updates.

 

[Den_88]

After about 3 hours of checking and tweaking things, I got it working. It counts the lap, the trees and grass have been trimmed, and I'm having trouble with pit lane. What's its real name? It counts the hotlap. More updates soon... I considered using a circuit, but the only way to learn is by failing again and again, so it's a conversion from scratch...
Does it need more work? A LOT.

Assetto Corsa: The Manual

I will post the updates of my book in this blog of mine. Any other mod I am currently working on will be here too!

assettocorsathemanual.blogspot.com

And again we return to what we advised you.Read the documentation on creating models in Assetto Corsa.The "data" folder should contain information about surfaces
study this

 

[fleskebacon]

Honda Fit 2010 PACK Public Release!!
Download: https://www.mediafire.com/file/2q1doms4c199z7r/10_fit_rs_honda_pack.rar/file
Converted From GT6
-AO inside and out
-Realistic Dashboard
-Physics
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal

Honda Fit 2010 PACK
STOCK
TURBO
TRACK
View attachment 1540779View attachment 1540780View attachment 1540781View attachment 1540782View attachment 1540783View attachment 1540784View attachment 1540785View attachment 1540786View attachment 1540787View attachment 1540788View attachment 1540789View attachment 1540790

I always laugh silently to myself when reminded why the Honda Fit is named Honda Jazz in Europe.

Why Honda Didn’t Call The Fit - Jazz By Its Intended Name... | Carscoops

Since we found out why by one of our readers in a comment he left on our 2008 Honda Jazz / Fit article, we thought it’d be only fair to post the comment

www.carscoops.com