Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 158,807 comments
  • 52,566,528 views
View attachment 1535278


@Masscot could you change the hack-and-slay shifting animation to something more appropriate, please?
This is about the best one I can apply. It's too high, but a more natural movement.
But for the love of God, somebody please fix the shaders, flickering textures and light leakage in the cockpit, and apply some AO. It's like the materials are back-lit.
Or, even better, drop the wonderful cockpit from Tidy's GT7 port in there and kill this existing one with fire. It's one fugly place to sit in VR at the moment.
 

Attachments

This is about the best one I can apply. It's too high, but a more natural movement.
But for the love of God, somebody please fix the shaders, flickering textures and light leakage in the cockpit, and apply some AO. It's like the materials are back-lit.
Or, even better, drop the wonderful cockpit from Tidy's GT7 port in there and kill this existing one with fire. It's one fugly place to sit in VR at the moment.
Hi. Its not vr ready because base mod is very dated. Which shaders need fixing, body? Cockpit? Any other? Did not notice flickering textures. And can You show some pics where light is leaking, please?
 
Hi. Its not vr ready because base mod is very dated. Which shaders need fixing, body? Cockpit? Any other? Did not notice flickering textures. And can You show some pics where light is leaking, please?
Not at my gaming rig atm but from memory:
  • for light leakage, look up to the sun visors on the headliner
  • for flickering textures, the passenger door lining
  • there's a rogue triangle on the base of the passenger a-pillar
  • seems to be a total lack of AO in the cockpit, a total lack of any self-shadowing
  • seats, headliner, door cars etc seem to glow as if lit from within

Hope that helps!
 
Hi. Its not vr ready because base mod is very dated. Which shaders need fixing, body? Cockpit? Any other? Did not notice flickering textures. And can You show some pics where light is leaking, please?
I think the mod is so low-quality, especially the interior, that it's not worth the time to fix it... the exterior looks decent. I'm keeping it because there's currently nothing better for this specific model; it falls into the barely acceptable category.
 
I think the mod is so low-quality, especially the interior, that it's not worth the time to fix it... the exterior looks decent. I'm keeping it because there's currently nothing better for this specific model; it falls into the barely acceptable category.
Yeah, it's garbage. Typical ExMods *****.
 
It is dated low quality, but there is very little chance that there will be any other versions of this car. To me its acceptable as non vr user, but things Mascot mentioned needs fixing.
 
Not at my gaming rig atm but from memory:
  • for light leakage, look up to the sun visors on the headliner
  • for flickering textures, the passenger door lining
  • there's a rogue triangle on the base of the passenger a-pillar
  • seems to be a total lack of AO in the cockpit, a total lack of any self-shadowing
  • seats, headliner, door cars etc seem to glow as if lit from within

Hope that helps!
Thanks.
OP link was updated with fixes for light leakage and glowing shader problem.
Other things like odd triangles and flickering require model meshes adjustment in 3d software, which will not bring it to gt7 level of detail anyway, so its better left untouched.
Screenshot_rtm_mclaren_f1_gt_ddm_gts_tsukuba_9-4-126-21-47-49.webp
 
I solved the problem that affected the front glass of the Lamborghini Urus from Binary Motors and TGN, practically the black edge of the front glass was transparent....


Screenshot_bm_lamborghini_urus_imola_1986_9-4-126-21-39-28.webp
Screenshot_bm_lamborghini_urus_imola_1986_9-4-126-21-39-18.webp
Screenshot_bm_lamborghini_urus_imola_1986_9-4-126-21-39-8.webp

before



Link kn5:
 

Attachments

  • Screenshot_bm_lamborghini_urus_imola_1986_9-4-126-22-31-22.webp
    Screenshot_bm_lamborghini_urus_imola_1986_9-4-126-22-31-22.webp
    98.5 KB · Views: 11
  • Screenshot_bm_lamborghini_urus_imola_1986_9-4-126-22-31-9.webp
    Screenshot_bm_lamborghini_urus_imola_1986_9-4-126-22-31-9.webp
    113.1 KB · Views: 8
  • Screenshot_bm_lamborghini_urus_imola_1986_9-4-126-22-31-16.webp
    Screenshot_bm_lamborghini_urus_imola_1986_9-4-126-22-31-16.webp
    120.7 KB · Views: 10
Thanks.
OP link was updated with fixes for light leakage and glowing shader problem.
Other things like odd triangles and flickering require model meshes adjustment in 3d software, which will not bring it to gt7 level of detail anyway, so its better left untouched.
View attachment 1535760
Hi, I noticed that on your Assetto Workshop page it’s not possible to navigate to pages 2, 3, etc. When clicking on the different page numbers, it always shows page 1 with the most recent mods. I’m not sure if it’s a bug on my browser side or an issue with the website. thx :-)
 

Attachments

Beauty of the decrypting tool is that i can now release my mods i've make over the last few years. Now i dont have to worry about people using them and encrypting them on patreon etc, I can releae knowing that everyone is in the same situation. Far from ruining AC modding, i think this might just if anything improve it.
 
Beauty of the decrypting tool is that i can now release my mods i've make over the last few years. Now i dont have to worry about people using them and encrypting them on patreon etc, I can releae knowing that everyone is in the same situation. Far from ruining AC modding, i think this might just if anything improve it.
It's a double-edged sword, really. On one hand it screws over the modders modelling stuff from scratch but on the other hands it screws over other the modders encrypting absolutely horrendous mods and that's a comeuppance long overdue.

I've used it mainly to decrypt mods from Russian (amongst others but they're almost always the biggest culprits) modders that love to use 4k textures for everything and use the same copy pasted fiziks lol
 
Last edited:
I'd like some clarification regarding the ext_config.ini file. In theory, AC is based on a hierarchical system, so by respecting this hierarchy, you can overwrite everything situated at lower levels, right? For example, you overwrite the original kn5 texture with a dedicated one at a higher level (the skin folder).

Now, returning to the initial discussion.. I was working on the Ferrari 312/64, while trying to figure out how to use additional kn5s without having strange rotations or offsets. On this car a lot of scripts don't work, even though the material is ready and prepared for scripting. Specifically, I can apply scripts to the wheels and bodywork, but not the exhausts, engine, etc... they remain the same. This forces me to export meshes that theoretically don't require exporting, resulting in the aforementioned problems (offset and rotation). Tbh I don't want to export 3/4 of the original kn5. I believe something is interfering, but I've never had this problem before (even with the CM downloadable configs).

I don't understand what's going on 😣
 
I'd like some clarification regarding the ext_config.ini file. In theory, AC is based on a hierarchical system, so by respecting this hierarchy, you can overwrite everything situated at lower levels, right? For example, you overwrite the original kn5 texture with a dedicated one at a higher level (the skin folder).

Now, returning to the initial discussion.. I was working on the Ferrari 312/64, while trying to figure out how to use additional kn5s without having strange rotations or offsets. On this car a lot of scripts don't work, even though the material is ready and prepared for scripting. Specifically, I can apply scripts to the wheels and bodywork, but not the exhausts, engine, etc... they remain the same. This forces me to export meshes that theoretically don't require exporting, resulting in the aforementioned problems (offset and rotation). Tbh I don't want to export 3/4 of the original kn5. I believe something is interfering, but I've never had this problem before (even with the CM downloadable configs).

I don't understand what's going on 😣
I discovered something recently. If You don't want to find values for how much new part is needed to offset or rotate. You check hierarchy in 3d soft You are using and use previous part name in ext model replacement block.
INSERT_IN = previous part name
INSERT_AFTER = previous part name
 
I discovered something recently. If You don't want to find values for how much new part is needed to offset or rotate. You check hierarchy in 3d soft You are using and use previous part name in ext model replacement block.
INSERT_IN = previous part name
INSERT_AFTER = previous part name
Thanks mate, I'll let you know if it works :D
 
umb
Hi, I noticed that on your Assetto Workshop page it’s not possible to navigate to pages 2, 3, etc. When clicking on the different page numbers, it always shows page 1 with the most recent mods. I’m not sure if it’s a bug on my browser side or an issue with the website. thx :-)
Hi. Not only You there was some weird bug on AW navigation, its fixed now, thanks for reporting.

New light update for F1 GT from @k_p available for download from OP.
Screenshot_rtm_mclaren_f1_gt_ddm_gts_tsukuba_10-4-126-17-33-36.webp
Screenshot_rtm_mclaren_f1_gt_ddm_gts_tsukuba_10-4-126-17-34-18.webp
 
Last edited:
I'd like some clarification regarding the ext_config.ini file. In theory, AC is based on a hierarchical system, so by respecting this hierarchy, you can overwrite everything situated at lower levels, right? For example, you overwrite the original kn5 texture with a dedicated one at a higher level (the skin folder).

I don't understand what's going on 😣
afiak ext_config.ini is hierarchical, meaning you can "overwrite" a setting after an initial setting if a change comes after that affects a mesh/material. I dont know if scripts are read hierarchicaly
 
afiak ext_config.ini is hierarchical, meaning you can "overwrite" a setting after an initial setting if a change comes after that affects a mesh/material. I dont know if scripts are read hierarchicaly
I didn't think about it.. Is there a way to change the name of the material assigned to an object via ext_config? This should stop active scripts from working. As mentioned previously, I'm happy to create an additional KN5 with the meshes that require a new material/shader, but I'd like to limit myself to adding only those. Otherwise, for example, with 312/64 I'd basically have to create a new LOD A.

I hope I didn't ask a silly question, unfortunately I'm not that expert in how scripting works
 
Last edited:
I have received word that all Forza Horizon 6 (RAW) car models are available unencrypted and easily convertible. I would love to see 1990 Alfa Romeo SE 048SP, 2017 Ferrari J50, Lamborghini Centenario LP 770-4, 1986 Porsche 959 Prodrive Rally Raid #185....
 
I have received word that all Forza Horizon 6 (RAW) car models are available unencrypted and easily convertible. I would love to see 1990 Alfa Romeo SE 048SP, 2017 Ferrari J50, Lamborghini Centenario LP 770-4, 1986 Porsche 959 Prodrive Rally Raid #185....
Not so easily as PGG changed the carbin/modelbin encryption so the Blender script nor the Doliman method for 3DSIMED work
 
WIP (Soonish)

You've begged, I've fired up Blender again.

Size wont be absolutely perfect, but nearly.

Release? As soon as I've figured out some minor visual and "extensional" issues. ;) And a way to create LODs again, has been a while. On the other hand I could just release it and wait for someone to make an update. I guess it shouldnt take that long. :lol:

Left side: Latest release of DaWallace and myself
Right side: Next release

@Masscot : Wanna create a new driver and shifting model? If yes, I'll send you the current work. :cheers:

bmw_m1_procar_.webp
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back