Assetto Corsa PC Mods General DiscussionPC

[LaChub]

In the west layout, these two tire walls located after the Turn 8 sign and before the start/finish straight (left side of the track) do not have a collision, as can be seen in the images...


View attachment 1535466

View attachment 1535467

... and at the pit entrance there is also a group of tires that are not collidable. Thanks.

Thank you! It will be fixed.

 

[timetoo22]

Yepp, and as usual they are going after people that make scratch made content.
This image has never been more accurate lol.
View attachment 1535473

I go on a GTR2 mod site and they are proper Nazi about people 'stealing' their GTR2 mods for AC..... irony of course being the thread about converting AC mods into GTR2.
Its a load of balony IMO, these idiotic folks who put some legal jargon about prosecution if people dare to convert it... laughable.
People are litterally walking into shops in the UK and walking out with stuff with no one allowed to tackle them, i doubt anyone really gives two ***** about some ripped mod getting converted from GTR2 to AC..

 

[Pilot3331]

Another bug was discovered and fixed for F1 GT:
Weird internal windscreen shadows in sun set conditions. internal windscreen texture and shader parameters were changed.
For those who like riding in sun set conditions, just redownload from OP.

 

[FrustratedUse]

I go on a GTR2 mod site and they are proper Nazi about people 'stealing' their GTR2 mods for AC..... irony of course being the thread about converting AC mods into GTR2.
Its a load of balony IMO, these idiotic folks who put some legal jargon about prosecution if people dare to convert it... laughable.
People are litterally walking into shops in the UK and walking out with stuff with no one allowed to tackle them, i doubt anyone really gives two ***** about some ripped mod getting converted from GTR2 to AC..

Yeah it's really funny seeing GTR2 modders act as if todays AC community is using their garbage. All because GT Supreme & SimDream ported a bunch of their trash 40 years ago.

Shoutout to ChaosZero! The amount of AC mods i have seen him port over to GTR2 is hilarious. All because GT Supreme yoinked their **** decades ago that no one cars about anymore lol.

Just check the FRM discord lmfao. They still hold an grudge against GT Supreme decades later for porting their low effort low quality 3D models that no one uses anymore. Using that as an justification to go to the AC community, Decrypt our stuff and then backport them to GTR2. The amount of GT3 mods from AC that get backported to that game is hilarious, Even more funnier when the same said community is actively decrypting work by RSS, VRC and URD and using the "wElL tHeY StOlE oUr MoDs 10 YeArS aGo!!"

Absolute idiots. That discord isn't even any better, Just elitist thieves that barely do their own work.

 

[Gabriele]

Hi, do these rims (the rear rims in the picture) exist in Assetto Corsa for the Lancia Delta HF 16v?

 

[ManuR94]

Helpme T78 Mustang, dont charge wheels.
and...

Finished fix mod, I couldn’t get the AO done, but it’s usable for now. There are still a few things that need fixing, but enjoy it 🙂

https://mega.nz/file/0xxjRYjQ#-Zi1vGbnvI3ro3XkQOSFj9RrWcZH7MnFp8S_kDFGyPs
Turismo Argentum

 

[shi]

Nurburgring 1995 - 2001 v1.3

https://www.patreon.com/posts/nurburgring-1995-118346467

View attachment 1414093
Old layout of Nurburgring, Germany.
Conversion from F1 Challenge.

-CSP recommended
-10 layouts (Yearly billboards and building variations) (F1, DTM, ITC)
-36 pit/start
-AI, cam

Known Issues;
At the start of the race, the four cars from the last row move to the pits.
unchecking:
CSP Settings→General Patch Settings→Physics experiments→Fix missing or misplaced spawn points

Credits & Thanks;
F1 Challenge Track by dmarques
(VB and CMT's version with ugrades and optimizations to buildings and surroundings)

Terms Of Use; (F1C)
Enjoy this mod to the fullest, that's all. If you want to convert or use this
as a base to create other cars, you're welcome in doing so as long as the
appropriate credit is given to the respective authors of the files you are
using. You can find all authors in this file

AC converted by @shi (shin956)
Pit tent from F1-S-R's 1994 Track Pack
AI and sidelines by IMEAN
logo.png and sections.ini by @Fanapryde
Crowds texture by @Kniker97
background, cone and some textures by kunos
Test and Feedback by @Breathe

Enjoy.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;
Fixed missing tree walls (ext_config.ini).
Changed pine trees textures. (Thanks Mascot)

v1.1 changelog;
Fixed grass mapping in ext_config.
Fixed objects flickering.
Some minor fixes.
- Thanks Mascot for the report.
Set up tire wall in Kuzanbindung.
- Thanks M1GHTYM4VS for the report.

v1.2 changelog;
Even when CSP settings → General Patch Settings → CPU optimizations → Chunks optimizations are set to Advanced, ground objects are no longer hidden. (Tested with CSP 0.2.12-preview1.)
Fixed a missing mesh in the stand.
Added ITC 1996, DTM2000, and DTM 2001 layouts.

v1.3 changelog;
Fixed the flickering objects.
Fixed the stretched/flattened image on the video screens.
- Thanks Mascot for the report.
Fixed the floating object.
Replaced some tree textures.

Nurburgring 1995 - 2001 v1.3

v1.3 changelog;
Fixed the flickering objects.
Fixed the stretched/flattened image on the video screens.
- Thanks @Masscot for the report.
Fixed the floating object.
Replaced some tree textures.

 

[LaChub]

Calabogie Motorsports Park (LilSki) 0.95​

Addon Layout for Calabogie Motorsports Park (LilSki) - Updates

www.gtplanet.net

fixed missed collision
Thanks Perico Lospa

 

[andrevr]

its cheating.

100% correct. But that's the answer to a different question 😊
Q1: "Why do they do it?"
Q2: "Is it right to do it?"

 

[Masscot]

View attachment 1535278


@Masscot could you change the hack-and-slay shifting animation to something more appropriate, please?

This is about the best one I can apply. It's too high, but a more natural movement.
But for the love of God, somebody please fix the shaders, flickering textures and light leakage in the cockpit, and apply some AO. It's like the materials are back-lit.
Or, even better, drop the wonderful cockpit from Tidy's GT7 port in there and kill this existing one with fire. It's one fugly place to sit in VR at the moment.

 

[Vintagedriver]

I came across this YT channel, with some nice tips on AC. Think this video can be interesting for VR users who are lacking any correcting skills

 

[Pilot3331]

This is about the best one I can apply. It's too high, but a more natural movement.
But for the love of God, somebody please fix the shaders, flickering textures and light leakage in the cockpit, and apply some AO. It's like the materials are back-lit.
Or, even better, drop the wonderful cockpit from Tidy's GT7 port in there and kill this existing one with fire. It's one fugly place to sit in VR at the moment.

Hi. Its not vr ready because base mod is very dated. Which shaders need fixing, body? Cockpit? Any other? Did not notice flickering textures. And can You show some pics where light is leaking, please?

 

[Masscot]

Hi. Its not vr ready because base mod is very dated. Which shaders need fixing, body? Cockpit? Any other? Did not notice flickering textures. And can You show some pics where light is leaking, please?

Not at my gaming rig atm but from memory:

• for light leakage, look up to the sun visors on the headliner
• for flickering textures, the passenger door lining
• there's a rogue triangle on the base of the passenger a-pillar
• seems to be a total lack of AO in the cockpit, a total lack of any self-shadowing
• seats, headliner, door cars etc seem to glow as if lit from within

Hope that helps!

 

[Kwara]

Hi. Its not vr ready because base mod is very dated. Which shaders need fixing, body? Cockpit? Any other? Did not notice flickering textures. And can You show some pics where light is leaking, please?

I think the mod is so low-quality, especially the interior, that it's not worth the time to fix it... the exterior looks decent. I'm keeping it because there's currently nothing better for this specific model; it falls into the barely acceptable category.

 

[Masscot]

I think the mod is so low-quality, especially the interior, that it's not worth the time to fix it... the exterior looks decent. I'm keeping it because there's currently nothing better for this specific model; it falls into the barely acceptable category.

Yeah, it's garbage. Typical ExMods *****.

 

[Pilot3331]

It is dated low quality, but there is very little chance that there will be any other versions of this car. To me its acceptable as non vr user, but things Mascot mentioned needs fixing.

 

[Pilot3331]

Not at my gaming rig atm but from memory:

• for light leakage, look up to the sun visors on the headliner
• for flickering textures, the passenger door lining
• there's a rogue triangle on the base of the passenger a-pillar
• seems to be a total lack of AO in the cockpit, a total lack of any self-shadowing
• seats, headliner, door cars etc seem to glow as if lit from within

Hope that helps!

Thanks.
OP link was updated with fixes for light leakage and glowing shader problem.
Other things like odd triangles and flickering require model meshes adjustment in 3d software, which will not bring it to gt7 level of detail anyway, so its better left untouched.

 

[Kwara]

I solved the problem that affected the front glass of the Lamborghini Urus from Binary Motors and TGN, practically the black edge of the front glass was transparent....

before



Link kn5:

 

[MasterFocus]

Anyone got refraction file for the Tatra 603-2?
Last update is from 2020, it need a little sparkle to it!!

https://www.overtake.gg/downloads/tatra-603-2-b5-marathon.32702/

 

[timetoo22]

The decrypting mod works i can confirm.... from a friend who tried it.... even tracks.

 

[PedroBLR]

 

[umb]

Thanks.
OP link was updated with fixes for light leakage and glowing shader problem.
Other things like odd triangles and flickering require model meshes adjustment in 3d software, which will not bring it to gt7 level of detail anyway, so its better left untouched.
View attachment 1535760

Hi, I noticed that on your Assetto Workshop page it’s not possible to navigate to pages 2, 3, etc. When clicking on the different page numbers, it always shows page 1 with the most recent mods. I’m not sure if it’s a bug on my browser side or an issue with the website. thx :-)

 

[k_p]

Anyone got refraction file for the Tatra 603-2?
Last update is from 2020, it need a little sparkle to it!!

https://www.overtake.gg/downloads/tatra-603-2-b5-marathon.32702/

View attachment 1535828

Light rework for Tatra 603-2

Two ext_config in zip, for gamma and for lcs, because lcs have for whatever reason 10x stronger emissives.

Copy files from zip and choose ext_config. By default is gamma.

 

[timetoo22]

Beauty of the decrypting tool is that i can now release my mods i've make over the last few years. Now i dont have to worry about people using them and encrypting them on patreon etc, I can releae knowing that everyone is in the same situation. Far from ruining AC modding, i think this might just if anything improve it.

 

[StoffelWaffle]

Beauty of the decrypting tool is that i can now release my mods i've make over the last few years. Now i dont have to worry about people using them and encrypting them on patreon etc, I can releae knowing that everyone is in the same situation. Far from ruining AC modding, i think this might just if anything improve it.

It's a double-edged sword, really. On one hand it screws over the modders modelling stuff from scratch but on the other hands it screws over other the modders encrypting absolutely horrendous mods and that's a comeuppance long overdue.

I've used it mainly to decrypt mods from Russian (amongst others but they're almost always the biggest culprits) modders that love to use 4k textures for everything and use the same copy pasted fiziks lol

 

[GT3Masters97]

I'd like some clarification regarding the ext_config.ini file. In theory, AC is based on a hierarchical system, so by respecting this hierarchy, you can overwrite everything situated at lower levels, right? For example, you overwrite the original kn5 texture with a dedicated one at a higher level (the skin folder).

Now, returning to the initial discussion.. I was working on the Ferrari 312/64, while trying to figure out how to use additional kn5s without having strange rotations or offsets. On this car a lot of scripts don't work, even though the material is ready and prepared for scripting. Specifically, I can apply scripts to the wheels and bodywork, but not the exhausts, engine, etc... they remain the same. This forces me to export meshes that theoretically don't require exporting, resulting in the aforementioned problems (offset and rotation). Tbh I don't want to export 3/4 of the original kn5. I believe something is interfering, but I've never had this problem before (even with the CM downloadable configs).

I don't understand what's going on 😣

 

[Pilot3331]

I'd like some clarification regarding the ext_config.ini file. In theory, AC is based on a hierarchical system, so by respecting this hierarchy, you can overwrite everything situated at lower levels, right? For example, you overwrite the original kn5 texture with a dedicated one at a higher level (the skin folder).

Now, returning to the initial discussion.. I was working on the Ferrari 312/64, while trying to figure out how to use additional kn5s without having strange rotations or offsets. On this car a lot of scripts don't work, even though the material is ready and prepared for scripting. Specifically, I can apply scripts to the wheels and bodywork, but not the exhausts, engine, etc... they remain the same. This forces me to export meshes that theoretically don't require exporting, resulting in the aforementioned problems (offset and rotation). Tbh I don't want to export 3/4 of the original kn5. I believe something is interfering, but I've never had this problem before (even with the CM downloadable configs).

I don't understand what's going on 😣

I discovered something recently. If You don't want to find values for how much new part is needed to offset or rotate. You check hierarchy in 3d soft You are using and use previous part name in ext model replacement block.
INSERT_IN = previous part name
INSERT_AFTER = previous part name

 

[GT3Masters97]

I discovered something recently. If You don't want to find values for how much new part is needed to offset or rotate. You check hierarchy in 3d soft You are using and use previous part name in ext model replacement block.
INSERT_IN = previous part name
INSERT_AFTER = previous part name

Thanks mate, I'll let you know if it works

 

[Pilot3331]

Hi, I noticed that on your Assetto Workshop page it’s not possible to navigate to pages 2, 3, etc. When clicking on the different page numbers, it always shows page 1 with the most recent mods. I’m not sure if it’s a bug on my browser side or an issue with the website. thx :-)

Hi. Not only You there was some weird bug on AW navigation, its fixed now, thanks for reporting.

New light update for F1 GT from @k_p available for download from OP.

 

[MasterFocus]

Light rework for Tatra 603-2

Two ext_config in zip, for gamma and for lcs, because lcs have for whatever reason 10x stronger emissives.

Copy files from zip and choose ext_config. By default is gamma.

View attachment 1535947
View attachment 1535949View attachment 1535946View attachment 1535948View attachment 1535951View attachment 1535950

Thanks man, very much appreciated!!
And as usual, top notch work!!