Don't worry, the feeling will hopefully pass but if it doesn't then please seek medical help. Your doctor will either prescribe a course of tablets or, in extreme cases, refer you to a psychologist. The important thing is to remain calm.
I am going to make a concerted effort not to touch this track againAnd a very nice thing it is too. Thanks again for all your upgrades, which have really brought this track into a much better state.
, if you want to do an interesting thing, find the kn5 in the folder, double click it, imediately hold down the ALT key, it will unpack the track, go to "textures" folder and copy satterrain?? something like that, and edit it in paint.net, paint the grass greener, sand sandier etc, play with saturation, then copy the editted file into the track in a subfolder called TEXTURE, which will make the track load that texture instead. the thing i never got to was finishing the painting of this track.
Thanks Mike, forgot to say, on your previous Lancer you need to set INVERT SHIFTING HANDS to '0' in data/driver3d.ini otherwise he paddleshifts with the wrong hands for up/down.
Edit: hand/wheel synch is borked on your FQ-360. Don't forget to check this, it was set at 200:
[STEER_ANIMATION]
NAME=steer.ksanim
LOCK=360
Edit 2: just a thought, is the shifting type right for each car?
The Extreme uses paddle shifting but has a normal gear stick and no paddles on the steering wheel, the FQ-360 uses manual gears but has paddles on the steering wheel and a tiptronic shifter on the transmission tunnel. Are these definitely the right way round?
Thank you Mascott, i have to pay more attention and make the good choice when two possibilities exist.Thanks Mike, forgot to say, on your previous Lancer you need to set INVERT SHIFTING HANDS to '0' in data/driver3d.ini otherwise he paddleshifts with the wrong hands for up/down.
Edit: hand/wheel synch is borked on your FQ-360. Don't forget to check this, it was set at 200:
[STEER_ANIMATION]
NAME=steer.ksanim
LOCK=360
Edit 2: just a thought, is the shifting type right for each car?
The Extreme uses paddle shifting but has a normal gear stick and no paddles on the steering wheel, the FQ-360 uses manual gears but has paddles on the steering wheel and a tiptronic shifter on the transmission tunnel. Are these definitely the right way round?
can we please have a new dl link??
From that mentioned equipment I only have the shifter left and it works fine. I had the V3 pedals and the Formula wheel and they worked too.
Ah, cool - thanks. I usually take a look at the folder when its installed to remove the backups, psd templates, wanky pink/purple skins etc.
On a related (unrelated?) note, does anyone with the Fanatec Seq Shifter v1.5 know if it's possible to combine gated shifting, paddle shifting AND sequential shifting all on the same controller profile in CM?
) I can still shift with the paddles, but the sequential box won't work unless I change to my sequential profile, which is a bit of a faff requiring a session restart.
I use JoyToKey to solve that.On a related (unrelated?) note, does anyone with the Fanatec Seq Shifter v1.5 know if it's possible to combine gated shifting, paddle shifting AND sequential shifting all on the same controller profile in CM?
At the moment I have paddle shifting and gated shifting on the same profile, so if the car supports gated shifting, that's what'll work, and ditto with paddles. No need to change profiles.
I have to change profiles to use the sequential box instead of the paddles though, which is a tad annoying. Seems like I can't map up/down on the sequental to share the profile with the paddle shifts, so if I find myself in a car that obviously uses sequential shifting (the animation is normally the giveaway
Hope that makes sense, I probably used ten times as many words than was necessary.
TLDR: help!
the ONLY game I can use all three shift type on is AC, i have a "up-down" shifter (if thats what you mean by sequential) , and h-patterns and the paddles, I use the CM interface to map the up-down one. I wish my other games could do this becaus for the v8's australia they use this, and I cannot map it in AMS. Not sure we are saying the same thing though as I suspect you mean using 3rd-4th as up down whereas in my case its seperate hardware?On a related (unrelated?) note, does anyone with the Fanatec Seq Shifter v1.5 know if it's possible to combine gated shifting, paddle shifting AND sequential shifting all on the same controller profile in CM?
At the moment I have paddle shifting and gated shifting on the same profile, so if the car supports gated shifting, that's what'll work, and ditto with paddles. No need to change profiles.
I have to change profiles to use the sequential box instead of the paddles though, which is a tad annoying. Seems like I can't map up/down on the sequental to share the profile with the paddle shifts, so if I find myself in a car that obviously uses sequential shifting (the animation is normally the giveaway
Hope that makes sense, I probably used ten times as many words than was necessary.
TLDR: help!
And a very nice thing it is too. Thanks again for all your upgrades, which have really brought this track into a much better state.
