Assetto Corsa PC Mods General DiscussionPC

[GrauerWolf]

Hi folks - my Ford GT GT3 from BE_modding doesn`t work as AI (no pit leaving).
Ckecked engine.ini and ai.ini files for wrong values but so far i can see everything is ok. Any ideas?...

 

[Fall Guy]

I´ve asked that also in Binary discord, but why do most of all newly released cars don´t throw a correct shadow underneath the car? It always looks like the car has been put into that image.

@petercrill ? CSP or mod bug?

 

[CrisT86]

Was the comment related to Long Beach or Montreal, i think somethings are getting mixed up ?

long beach, yes, mixed up reply, sorry

 

[Masscot]

I´ve asked that also in Binary discord, but why do most of all newly released cars don´t throw a correct shadow underneath the car? It always looks like the car has been put into that image.

@petercrill ? CSP or mod bug?

Not sure if it'll help you but have you got Fake Shadows FX active?



Shadows look OK to me.


The car in your image seems to be itself in shadow, so its own shadow won't be relatively strong.
What does it look like in direct sun?

@Fall Guy was this of any help?

 

[MrLonguinha17]

A small sample of the pack (50-53).

 

[jaqory]

Hi folks - my Ford GT GT3 from BE_modding doesn`t work as AI (no pit leaving).
Ckecked engine.ini and ai.ini files for wrong values but so far i can see everything is ok. Any ideas?...

Fixed

 

[Badgerman]

Hello all,

Has anyone ever had a car get "stuck" and refuse to accept changes to the suspension.ini file ? I've got a model that has the rear wheels protruding the fender - and have no problem changing the position of the wheels in the CM Showroom using the "align using data" button - but in the game the wheels remain in the original position. Changing the CG or wheelbase position works in the showroom, but only has a strange effect in the game; the diameter of the wheels changes a slight amount. This only started happening after I'd hit the "Update model" button in the showroom...

And it's only with this car... editing the suspension.ini for other cars works fine...

Is there a hidden file somewhere I don't know about that's been generated by CM or something ? NO data.acd to stop things from moving.

It really seems that in game, the rear wheels are fixed in a single position, yet in all the .ini files you can change away to your hearts content...

 

[Josuracer]

I´ve asked that also in Binary discord, but why do most of all newly released cars don´t throw a correct shadow underneath the car? It always looks like the car has been put into that image.

@petercrill ? CSP or mod bug?

I have not that problem, I think maybe is a CSP bug

 

[racinjoe013]

I'm going to be releasing one last update to my VIR mod in the not too distant future but i'm wondering if I should do it like some of my recent mods, as a standalone track. My past versions were all setup to be used as an addon to the original. So standalone track or addon?

I really hate to keep doing these as standalones because I feel like i'm stepping over the line. I try to make it clear on all of these that all credit for the tracks go to the original track maker, but I still feel uncomfortable about it for some reason.

 

[Short_Circut]

What file in a car's data file controls it's ffb effects? Or is it determined by something else?

general ffb in car.ini
suspension geo in suspensions.ini

and if you use cphys then SAT can be tinkered with in tyres.ini

Hello all,

Has anyone ever had a car get "stuck" and refuse to accept changes to the suspension.ini file ? I've got a model that has the rear wheels protruding the fender - and have no problem changing the position of the wheels in the CM Showroom using the "align using data" button - but in the game the wheels remain in the original position. Changing the CG or wheelbase position works in the showroom, but only has a strange effect in the game; the diameter of the wheels changes a slight amount. This only started happening after I'd hit the "Update model" button in the showroom...

And it's only with this car... editing the suspension.ini for other cars works fine...

Is there a hidden file somewhere I don't know about that's been generated by CM or something ? NO data.acd to stop things from moving.

It really seems that in game, the rear wheels are fixed in a single position, yet in all the .ini files you can change away to your hearts content...

are you editing the suspensions.ini file directly (particularly [GRAPHICS_OFFSETS]) or just using cm showroom to make the changes?

 

[Perico Lospa]

... standalone track or addon?...

Us, the lazy ones who don't want to remember to configure options manually each time we go to play, prefer that the game take care of varying the appearance of the track depending on the season of year... I've always thought how nice it would be if your skins were integrated into the tracks, and that with seasonal changes activated, they would appear automatically...

But I understand your concern...

 

[RMi_wood]

are you ready to get DiRTy ?

 

[FeherDenes]

Hi folks - my Ford GT GT3 from BE_modding doesn`t work as AI (no pit leaving).
Ckecked engine.ini and ai.ini files for wrong values but so far i can see everything is ok. Any ideas?...

1) it's an unfinished mod, of course it has issues like that
2) it's because the auto shifter which is in drivetrain.ini is set to a higher rpm than the engine can reach before the rev limiter kicks in

 

[Natan5]

guys! my red starting lights disappeared on the start .
how can i fix it and get back the lights ?
thx

 

[bestiajo]

Hi everyone!! It´s me or do you have also this problem related to the wheels...I have tried CSP 1.73, CSP 1.76 and CSP 1.80 Preview 115 and this problem still there...have to be something related to Extra FX because disappears when I deactivate it.
Kunos cars also have this issue...and my glowing brake discs has gone aswell, any ideas? Thank you.

 

[Fall Guy]

guys! my red starting lights disappeared on the start .
how can i fix it and get back the lights ?
thx

Steam integrity check.

 

[m3gt2]

anybody have working lumirank position with csp 1.80-115? for me i just got unlit numbers nomatter what i'm doing😔
maybe there si a trick or secret why i can't see it?
halp

 

[Fall Guy]

anybody have working lumirank position with csp 1.80-115? for me i just got unlit numbers nomatter what i'm doing😔
maybe there si a trick or secret why i can't see it?
halp

View attachment 1224058

P115 is a bag full of crap. I went back to 180p1. Should be working then.

 

[carTOON]

Hi everyone!! It´s me or do you have also this problem related to the wheels...I have tried CSP 1.73, CSP 1.76 and CSP 1.80 Preview 115 and this problem still there...have to be something related to Extra FX because disappears when I deactivate it.
Kunos cars also have this issue...and my glowing brake discs has gone aswell, any ideas? Thank you.

Does this problem exist even without CSP?

 

[m3gt2]

P115 is a bag full of crap. I went back to 180p1. Should be working then.

thanks! indeed just rolled back to 180-1 and got it working, but still with strange lines. do you see the same on your race?

 

[Perico Lospa]

P115 is a bag full of crap...

Well, is what usually happens with newly released versions... and then, with a little time and patience (and with the not always recognized hard work from a modder) that ugly duckling usually turns into a beautiful swan.

Respect.

 

[Badgerman]

general ffb in car.ini
suspension geo in suspensions.ini

and if you use cphys then SAT can be tinkered with in tyres.ini

are you editing the suspensions.ini file directly (particularly [GRAPHICS_OFFSETS]) or just using cm showroom to make the changes?

Thanks for the reply @Short_Circut ,

I always edit the suspensions.ini directly, making changes to the numbers, and watching the effect it has on the car in the showroom display. I normally only play with the wheelbase and CG locations. I've never touched the graphic offsets, frankly I've never had to. I'll give that a try.

Thanks again.

 

[TonySSS]

@jaqory Can you please re-upload all parts of BE MODDING car pack elsewhere since they ran out of quota when I was going to downloading part 4 such as MEGA?

 

[Rodger Davies]

I'm going to be releasing one last update to my VIR mod in the not too distant future but i'm wondering if I should do it like some of my recent mods, as a standalone track. My past versions were all setup to be used as an addon to the original. So standalone track or addon?

I really hate to keep doing these as standalones because I feel like i'm stepping over the line. I try to make it clear on all of these that all credit for the tracks go to the original track maker, but I still feel uncomfortable about it for some reason.

Ever since first posting some excellent track skins, you've been very modest and I don't think anyone would mistake that, but probably reach out to the track's author Darren Blythe on that one and check with him.

Thanks for the great looking Longford updates and the AI - that last corner causes very similar issues to Mulsanne corner at Le Mans; long straight into 90 degrees the AI either seems to stop well before or not bother braking at all. Not tried them out yet, but certainly will when I get a chance.

 

[Fall Guy]

thanks! indeed just rolled back to 180-1 and got it working, but still with strange lines. do you see the same on your race?
View attachment 1224060

Maybe try to change the lumirank to a different one, like 24hrs or WEC style? What happens then? Is that the 2019 crsh 911 GT3 R?

 

[Natan5]

Steam integrity check.

thx i will try

 

[Natan5]

great ! its working now ! many thanks Guy

 

[racinjoe013]

Not sure if it'll help you but have you got Fake Shadows FX active?

View attachment 1223946

Shadows look OK to me.

View attachment 1223947
The car in your image seems to be itself in shadow, so its own shadow won't be relatively strong.
What does it look like in direct sun?

@Fall Guy was this of any help?

Don't know if it helped @Fall Guy , but it sure helped me. That's been bugging me for so long now. The cars get about 4 car lengths ahead and all of a sudden the shadow under there car would disappear. Disabling Fake Shadows seems to have fixed it.

Ever since first posting some excellent track skins, you've been very modest and I don't think anyone would mistake that, but probably reach out to the track's author Darren Blythe on that one and check with him.

Thanks for the great looking Longford updates and the AI - that last corner causes very similar issues to Mulsanne corner at Le Mans; long straight into 90 degrees the AI either seems to stop well before or not bother braking at all. Not tried them out yet, but certainly will when I get a chance.

I tried to fix that last corner in so many ways and just couldn't get the ai to quit coming to a complete stop right there. I even tried the track's original ai and it does the same thing. I finally gave up on it for the time being and released the track with that one ai problem. I don't know why it happens. I've re-recorded the line so many times making sure I did not stop or brake hard in that area and the ai simply won't stop doing what you describe no matter what I do. Maybe there is an ai expert here who knows a way to get them to glide through that turn better.

 

[NivekBS]

Guys can you Tell me please - is the CPU or GPU More responsible for SOLs 3D clouds?

Yesterday i tried the SKY ppfilter SOL Version which comes with a SOL preset which includes 3d clouds.

Earlier i used 2d clouds.

Now with the Filter and his Settings the Game looks brilliant but my FPS are lierally killed!

I lost about 30 fps or more….

At some points only 45fps with a rtx3080 is wild (noVR)

 

[GrauerWolf]

Fixed

Oh, very helpful, thanks a lot for helping out!
What was wrong (asking to increase my learning curve)?