Assetto Corsa PC Mods General DiscussionPC

[NivekBS]

I have BOPed some 90s GT1 cars for singleplayer championship purposes, if someone is interested:

nivekBSs 90s GT1 BOP Project

This is my attempt to BOP the most known 90s GT1 cars for use in single player championship mode. I have driven several 90s GT1 championship seasons and achieved very good mixed up results with the following cars: legion_nissan_r390...

www.racedepartment.com

 

[Masscot]

Nissan Z (RZ34) GT500 2022 1.0


Full description on YouTube

Credits:
TheNuvolari - 3D model, sounds, skins, physics tweaks, porting the car to AC
XAVITHEHOBBIT - References help, testing
mhmd - 3D consultant, References help, remeshing several parts
Csaba007 - Physics
Tummie555 - Driver animations
enkay74 - Driver & crew textures
ChemFlummi, x4fab - Encryption

If you think 5 months of work is worth a donation:

Fizessen Zalán Kovács nevű ismerősének a PayPal.Me segítségével.

Lépjen a paypal.me/TheNuvolari19 oldalra és írja be az összeget. Mivel ez PayPal, ezért egyszerű és biztonságos. Még nincs PayPal-számlája? Ne aggódjon.

www.paypal.com

DOWNLOAD: https://sharemods.com/bxeryp6z9906/z_gt500_2022_1.0.zip.html
DOWNLOAD SKINNING KIT: https://sharemods.com/f1tu45a6jofg/z_gt500_skinning_kit.zip.html

If you find any bugs or want to leave feedback please don't quote me here as I'm not really active on this site anymore, you can find me on Discord (thenuvolari19)

Why is the car so small?
The cockpit is absolutely tiny, and (I'm not exaggerating for comic effect here) the driver looks to be about six years old.
In VR it's like driving a toy car.
I think something's gone very wrong with the scaling here.

Compare windscreen width and headlight separation with a standard Z400:

Here's the cars superimposed over each other (offset left-right) to better demonstrate the windscreen/a-pillar width differences:

BTW, forgot to say - thanks very much for the car!

 

[TheNuvolari]

Why is the car so small?
The cockpit is absolutely tiny, and (I'm not exaggerating for comic effect here) the driver looks to be about six years old.
In VR it's like driving a toy car.
I think something's gone wrong with the scaling here.

Blender shows correct parameters idk even after exporting with FBX units scale, idk what AC does with the model in ksEditor afterwards

Frankly I don't wish anyone to work with the interior of a Super GT car because modeling an interior from 3 pictures is quite the challenge to say the least and mediocre onboard videos from one angle don't do justice

 

[saXXXon]

Why is the car so small?
The cockpit is absolutely tiny, and (I'm not exaggerating for comic effect here) the driver looks to be about six years old.
In VR it's like driving a toy car.
I think something's gone very wrong with the scaling here.

Compare windscreen width and headlight separation with a standard Z400:

View attachment 1317584

Here's the cars superimposed over each other (offset left-right) to better demonstrate the windscreen/a-pillar width differences:

View attachment 1317591

Compared to the URDs

Looks great, but scaling seems off.
could of course be the URDs also.

 

[TheNuvolari]

I'm not sure then, I always export with FBX Units scale so

 

[Alguecool]

Blender shows correct parameters idk even after exporting with FBX units scale, idk what AC does with the model in ksEditor afterwards

Frankly I don't wish anyone to work with the interior of a Super GT car because modeling an interior from 3 pictures is quite the challenge to say the least and mediocre onboard videos from one angle don't do justice

Now try a forgotten racecar from 60 years ago. You'd be happy with 3 pictures

It's really strange because Blender is well known for mixing up scaling with FBX on a 1/100 scale, but not for a few % has it seems too. Can you do the same scaling test than mascot in blender, to be sure ?

Scaling seems to be quite a regular problem with AC's cars, really.
Future idea for x4fab : managing to get a fonctioning simple "global rescaling" tool in CM so modders don't have to redo the whole car by hand

 

[Rivanov]

The Walkaround Mode doesn't work anymore? I have enabled it in the INI file but when I press and/or hold E in Track Day mode it doesn't go into Walkmode.

Nobody?

 

[Fall Guy]

Nobody?

What Nobody?

The walkaround mode now is available under driving mode, just choose it from the dialogue menu in driving tab.

 

[oigolue]

Nissan Z (RZ34) GT500 2022 1.0


Full description on YouTube

Credits:
TheNuvolari - 3D model, sounds, skins, physics tweaks, porting the car to AC
XAVITHEHOBBIT - References help, testing
mhmd - 3D consultant, References help, remeshing several parts
Csaba007 - Physics
Tummie555 - Driver animations
enkay74 - Driver & crew textures
ChemFlummi, x4fab - Encryption

If you think 5 months of work is worth a donation:

Fizessen Zalán Kovács nevű ismerősének a PayPal.Me segítségével.

Lépjen a paypal.me/TheNuvolari19 oldalra és írja be az összeget. Mivel ez PayPal, ezért egyszerű és biztonságos. Még nincs PayPal-számlája? Ne aggódjon.

www.paypal.com

DOWNLOAD: https://sharemods.com/bxeryp6z9906/z_gt500_2022_1.0.zip.html
DOWNLOAD SKINNING KIT: https://sharemods.com/f1tu45a6jofg/z_gt500_skinning_kit.zip.html

If you find any bugs or want to leave feedback please don't quote me here as I'm not really active on this site anymore, you can find me on Discord (thenuvolari19)

Wow, this looks incredible! Thank you so much for bringing this car to AC, i'm not a circuit racer guy but i have been dreaming of it! And all my support for your loss, there are few things that i love more than my little fur buddy, hope you can get through it the better you can.

 

[jac0]

And I've vanished again for quite a bit....
Countach 25th Anniversary progress.
View attachment 1317554
The car is now ready to be imported into AC since I've sorted out all of the mesh issues... And I've managed to reduce the polycount from 1150k polys to around 890k. I've still yet to decide if the car should have a HD variant (This one) and a performance friendly version with 250k-to 400k polygons...
AO baking and other improvements shouldn't take long.
This took longer than expected for a Kunos Countach reskin...
Polyphony really found a way to torture modders with the tessellation method they use for models.
And some meshes were either damaged or incomplete (meshes that you need to boolean and or fix yourself).

can't wait...
preferably only release 1 version, as optimized as possible so not to have a bad performance, but still with enough polys (to not make it have ugly none-rounded parts)
I noticed for some reason some cars w for example +1500K polys give my cpu less stress then others w for example 800K.
So the number of polys is prob the most important, but not the only thing that needs to be considered for a car being optimized... (don't ask me what the other things are , cause I don't know )

But anyway I think keeping 2 cars updated is more a pita for u ...

 

[Masscot]

I'm not sure then, I always export with FBX Units scale so

The car does seem too small by quite a margin, which then begs the obvious question (if true): will it be rescaled? It'd be a crime if all your hard work was wasted.

 

[GT3Masters97]

Blender shows correct parameters idk even after exporting with FBX units scale, idk what AC does with the model in ksEditor afterwards

Frankly I don't wish anyone to work with the interior of a Super GT car because modeling an interior from 3 pictures is quite the challenge to say the least and mediocre onboard videos from one angle don't do justice

Try to measure the car in blender and see if it respects the actual dimensions. Unfortunately I also had a similar problem

 

[andrevr]

Nobody?

I'm on CSP 0.2.3-preview1. Definitely not working here. Don't even get the prompt on the screen in-game.

 

[Velocitaaa]

How did some cars look?in the "50 years of the Brazilian Grand Prix"
Surtees TS14A - Brabham BT37 - Tyrrell 005 - Lotus 72D
SURTEES

BRABHAM

TYRRELL

LOTUS ( From mod 1973 )

Scumdream?

 

[Cote Dazur]

I'm not sure then, I always export with FBX Units scale so

First, thank you so much for bringing this great car to AC.
As @Masscot mentioned, driving it in VR, the scale is off. The driver hands and everything else in that cockpit is too small.
I hope it will not be too hard to fix, as it is great to have that car available in AC.

 

[Pez94]

Finding any technical documents related to the Super GT is a PITA!
According to the official website these are the tyre dimensions for the 2023 (I think the technical regulation should have remained the same since 2021) cars are:

GT500
Front: Maximum width 336mm, maximum outer diameter 685mm
Rear: Maximum width 356mm, maximum outer diameter 712mm

技術規則 | About SUPER GT

about.supergt.net

Is it a viable option to check if the tyres are correct and then, check everything else?

 

[Jack Aqab]

To be fair, Lexus is expected to be in WEC GT class next year. I'm happy to see them both working on modern GT3 cars, because they're a mainstay of some of the biggest races for the next few years and have great variety. Just a pity they're both releasing the same one (and the split of skins between them). I guess they were in a race with each other to release and RSS has won through here.

End of the day though, enough grumbling - we've got 2x fantastic new scratch made GT3 cars! And that's much better than having 0.

I doubt there's enough detail about the not-yet-homologated Ford and Corvette, but I'm sure one or the other will be working on the 296 this year. LP Design is working on a Ford also, though that's obviously not quite the same (would be great if he'd create a 'normal' store).

Unfortunately, LP Design Ford Mustang 2024 is useless, cause is encrypted. I can't change fuel consumption for my WEC / IMSA grids in data.acd file... Does Anyone have another one?

 

[MrB00]

Why is the car so small?
The cockpit is absolutely tiny, and (I'm not exaggerating for comic effect here) the driver looks to be about six years old.
In VR it's like driving a toy car.
I think something's gone very wrong with the scaling here.

Compare windscreen width and headlight separation with a standard Z400:

View attachment 1317584

Here's the cars superimposed over each other (offset left-right) to better demonstrate the windscreen/a-pillar width differences:

View attachment 1317591

You do know how race cars that are built to a series work don't you? They share the road car name and similar looking body but that's as far as it goes. Dimensions aren't usually shared with the road car so you comparing it to the road car is wrong.

@TheNuvolari I'm sure you already know this but you have done everything correct.
I was just discussing this with someone who has created mods using Blender (outside of the GTP AC thread)
And she has said the following
"exporting with fbx units scale is the way
and if length and width are correct in blender, so should it be correct in AC too"

 

[Masscot]

You do know how race cars that are built to a series work don't you? They share the road car name and similar looking body but that's as far as it goes. Dimensions aren't usually shared with the road car so you comparing it to the road car is wrong.

Of course there will be discrepancies, but that seemed like an appropriate car to compare it to for demonstration purposes. And race cars aren't normally this much smaller than the production car.
Do you have VR? If so, hop in and you'll hopefully see the problem.
Regardless, I think it's now been established that the Nissan Z (RZ34) GT500 2022 1.0 might be scaled incorrectly, which was the only point of my post.
I'm surprised it wasn't noticed by the testers listed TBH, especially whoever scaled the driver to fit the cockpit. The first steer.ksanim used must have been bursting through the bodywork, although the driver does seem to have been scaled down a LOT to fit the steering wheel dimensions rather than a more appropriate steer.ksanim being used. This probably exaggerates the small feel to the cockpit scale even further, but I can't believe the tiny driver is the only thing making the car seem too small. Hopefully I'm wrong?

A further thought: if the export from Blender is indeed scaled correctly, then maybe the original doner model was too small to begin with?

 

[twobegreen]

Nobody?

 

[Raymond_Racer]

Of course there will be discrepancies, but that seemed like an appropriate car to compare it to for demonstration purposes. And race cars aren't normally this much smaller than the production car.
Do you have VR? If so, hop in and you'll hopefully see the problem.
Regardless, I think it's now been established that the Nissan Z (RZ34) GT500 2022 1.0 is scaled incorrectly, which was the only point of my post.
I'm surprised it wasn't noticed by the testers listed TBH, especially whoever scaled the driver to fit the cockpit. The first steer.ksanim used must have been bursting through the bodywork.

A further thought: if the export from Blender is indeed scaled correctly, then maybe the original doner model was too small to begin with?

According to the video description, TheNuvolari made the model of the Z from scratch

 

[andrevr]

GTP forum-er and creator of very cool tracks, @carTOON, got a nice write-up on RaceDepartment for his work on the 1936 Népliget Park circuit. 👏 👏

Népliget Park: The First Hungarian Grand Prix Track in Assetto Corsa

The Hungarian Grand Prix's first home was not the Hungaroring - instead, engines were roaring in Budapest's Népliget Park in 1936 already. The circuit is now available for Assetto Corsa.

www.racedepartment.com

 

[Masscot]

According to the video description, TheNuvolari made the model of the Z from scratch

Ah, OK - I've not watched any videos. I'm out of ideas then.
Hope it all gets resolved without being too much of a pain as the car itself seems great. Just small.

 

[Juanmy72]

Unfortunately, LP Design Ford Mustang 2024 is useless, cause is encrypted. I can't change fuel consumption for my WEC / IMSA grids in data.acd file... Does Anyone have another one?

 

[carTOON]

GTP forum-er and creator of very cool tracks, @carTOON, got a nice write-up on RaceDepartment for his work on the 1936 Népliget Park circuit. 👏 👏

Népliget Park: The First Hungarian Grand Prix Track in Assetto Corsa

The Hungarian Grand Prix's first home was not the Hungaroring - instead, engines were roaring in Budapest's Népliget Park in 1936 already. The circuit is now available for Assetto Corsa.

www.racedepartment.com

Ohh man, that surprised me...I'm about to read it. Thanks for the information!

 

[Rivanov]

View attachment 1317666

Thanks!

 

[MrHunt]

@TheNuvolari

Wow, no question, the mod is really awesome, I love this car.

Sure, the car has a small problem with the size, (5%-10%) but it's nothing earth-shattering, by any means, and VR isn't the standard anyway.


Really, thank you for your hard and good work!

 

[Vintagedriver]

Ohh man, that surprised me...I'm about to read it. Thanks for the information!

it’s a magnificent piece of work you did made.
Thanks for creating.

 

[carTOON]

it’s a magnificent piece of work you did made.
Thanks for creating.

Let's keep it real, I'm not a pro, but I'm happy if you like it, cheers mate!

 

[EanorFlint]

Hello Everyone,

I write here because i have a little problem in race with RSS Formula Hybrid 2023. Last day i try to do a race of 40 laps and with last CSP preview, some AI start in C5 compound (i dont know why but with the last CSP AI choose their compound in race - it was not the case before).
But after 15-16 laps, when their tyres was completely done, they never go to pits anyway. They just continue to race, driving slowly and slowly. At the end of the race, they crashed everywhere.
Did someone know how to fix this ? I try to find if an option in CSP caused this but i did'nt find.

Thank you