Assetto Corsa PC Mods General DiscussionPC

[wRobelele]

My first post here so hi to everyone

I have a question about VRC Peugeot, is it normal that FFB is so strong in this car? I had to turn down FFB strenght from 100 to like 15-20 for this car, in higher values wheel is so stiff that its almost impossible to turn it, even @ low speed corners. Its only a thing with this car, every other car is ok with my ingame FFB settings and 100 ffb (with small adjustments to specific cars form about 75-125), other VRC, RSS and URD cars are also ok. With Peugeot lowering FFB to 15 and steering stiffness is comparable to other prototypes, but the road feeling on straights is missing with such low FFB. So is it normal with this car or am I missing something? I always have extended physisc on but I tried turn it off and its the same. Thanks!

 

[vwcharger69]

My first post here so hi to everyone

I have a question about VRC Peugeot, is it normal that FFB is so strong in this car? I had to turn down FFB strenght from 100 to like 15-20 for this car, in higher values wheel is so stiff that its almost impossible to turn it, even @ low speed corners. Its only a thing with this car, every other car is ok with my ingame FFB settings and 100 ffb (with small adjustments to specific cars form about 75-125), other VRC, RSS and URD cars are also ok. With Peugeot lowering FFB to 15 and steering stifness is comparable to other prototypes, but the road feeling on straights is missing with such low FFB. So is it normal with this car or Im missing something? I always have extended physisc on but I tried turn it off and its the same. Thanks!

Which car: the tourer or the 9t8?

 

[OooAhh Cantona]

My bad, got it today 15:02 on my other mail address.
already downloaded and installed, now adding my collected info and skins...

Hi Fana,

What is your "collected info"? Other than the real names for UI, is there anything else? It has been some time since I last added anything to these cars, and I've forgotten any important add-ons.

 

[wRobelele]

Which car: the tourer or the 9t8?

Sorry, 9x8

 

[Moor1804]

Hi Fana,

What is your "collected info"? Other than the real names for UI, is there anything else? It has been some time since I last added anything to these cars, and I've forgotten any important add-ons.

Sounds - Ford capri zakspeed DRM Revival

SRgod submitted a new resource: Ford capri zakspeed DRM Revival - Ford capri zakspeed sound mod assettocorsa Hey, I made this sound mod for the Ford Capri zakspeed (drm aero) of the DRM revival pack. Let me know if you like it or not. Also be sure to check my channel, new sounds will be...

www.racedepartment.com

Sounds - Bmw 320 turbo DRM Revival

SRgod submitted a new resource: Bmw 320 turbo DRM Revival - Bmw 320 turbo sound mod assetto corsa Bmw 320 turbo (DRM 121 3) This car was much worse than the capri and I was really struggling to find good exterior samples so I reused some of the interior samples to get a pretty decent version...

www.racedepartment.com

Sounds - Lancia beta montecarlo turbo DRM Revival

SRgod submitted a new resource: Lancia beta montecarlo turbo DRM Revival - Lancia beta montecarlo turbo sound mod assettocorsa Lancia beta montecarlo turbo (Or DRM monastir) There are few onboard recordings of this car, and they have very bad quality, so I had to use delta s4 samples...

www.racedepartment.com

 

[vwcharger69]

Sorry, 9x8

I drive with a TS-XW racer. I've experienced a much stronger FFB. But as explicit in some review, it's a consequence of the hybrid engine on the front wheel.

 

[NivekBS]

new DRM mod update just dropped

Hope the skins are still working with newest Version

 

[MrHunt]

Hope the skins are still working with newest Version

They work, i tried it

 

[andrevr]

My first post here so hi to everyone

I have a question about VRC Peugeot, is it normal that FFB is so strong in this car? I had to turn down FFB strenght from 100 to like 15-20 for this car, in higher values wheel is so stiff that its almost impossible to turn it, even @ low speed corners. Its only a thing with this car, every other car is ok with my ingame FFB settings and 100 ffb (with small adjustments to specific cars form about 75-125), other VRC, RSS and URD cars are also ok. With Peugeot lowering FFB to 15 and steering stiffness is comparable to other prototypes, but the road feeling on straights is missing with such low FFB. So is it normal with this car or am I missing something? I always have extended physisc on but I tried turn it off and its the same. Thanks!

Hi and welcome

Short answer: No, it's not normal. The VRC wingless Pug has been almost universally received in the community as quite possible the best driving mod, in ever. So.

Longer answer: Since it's almost certainly something in your (like our) teeetering jenga tower of Windows, AC, CSP, Pure, mods, ppfilters, yada-yada, whoever helps you is either going to be blind guessing, or they'd have to Anydesk and work through every single layer one by one with you. Either way, for the guessers, it'd probably help if you detailed your setup a bit more fully? So that the experts who have similar bits and bobs can shoot from their own experience?

Or, you could drink from the tap?

Discord - Group Chat That’s All Fun & Games

Discord is great for playing games and chilling with friends, or even building a worldwide community. Customize your own space to talk, play, and hang out.

discord.gg

 

[wRobelele]

I drive with a TS-XW racer. I've experienced a much stronger FFB. But as explicit in some review, it's a consequence of the hybrid engine on the front wheel.

Im on Fana CSL DD 5nm, ok, so its normal thanks

Hi and welcome

Short answer: No, it's not normal. The VRC wingless Pug has been almost universally received in the community as quite possible the best driving mod, in ever. So.

Longer answer: Since it's almost certainly something in your (like our) teeetering jenga tower of Windows, AC, CSP, Pure, mods, ppfilters, yada-yada, whoever helps you is either going to be blind guessing, or they'd have to Anydesk and work through every single layer one by one with you. Either way, for the guessers, it'd probably help if you detailed your setup a bit more fully? So that the experts who have similar bits and bobs can shoot from their own experience?

Or, you could drink from the tap?

Discord - Group Chat That’s All Fun & Games

Discord is great for playing games and chilling with friends, or even building a worldwide community. Customize your own space to talk, play, and hang out.

discord.gg

Im on Fana CSL DD 5nm, in game FFB: Gain 70, Filter and Min Force 0. I have extendent physisc in CM on and in CM FFB Tweaks:

Basic: Active
More physically acurate gyro: Active
Output steering forces to wheel: Acitve and peak torque to 5nm
Rest is on deafult setting.

Like I said, its the issue only with this car, some cars are also to loose/stiff on 100 but its like up to 25 up or down (75-125 ffb strenght), only in this car to make it driveable I must turn it down to like 15 FFB strenght.

Thanks for help

Edit: sorry for double post, thought it would merge.

Edit 2:

Ohh, and wheel settings:

FFB - 100
FFS - Peak
NDP - OFF
NFR - OFF
NIN - OFF
INT - 4
FEI - 80
FOR - 100
SPR - 100
DPR - OFF

 

[kakauiyt]

Hi, are you releasing the 2010 today? I hope so :-)

wait a few days, ferrari virtual academy is finally cracked and I am currently spending endless hours on it rn

 

[Moor1804]

wait a few days, ferrari virtual academy is finally cracked and I am currently spending endless hours on it rn

OK thank you very much

 

[JK1977]

some new progress screenshots of the Mosler MT900 GT3 🙂
View attachment 1327060View attachment 1327061View attachment 1327062View attachment 1327063View attachment 1327064View attachment 1327065View attachment 1327066

Top Work

 

[Juppek]

OK thank you very much

What does that mean?

wait a few days, ferrari virtual academy is finally cracked and I am currently spending endless hours on it rn

What does that mean??

 

[Moor1804]

What does that mean?

 

[maximeerkat]

Tvr Sagaris Britcar 24hr 2010 loose replica (2-4k)

To install: choose which res you want then drop the "content" folder into CM

I have included a kn5 file only due to having to change 2 shader values on the wheels and windscreen. nothing else has been touched.


based on a real car on a real event but due to very few pictures and the ones i could find being very low quality, I have used a few different pictures to work from each pic slightly different variation of the same livery. There was only 1 picture with the same body the rest were fairly different. Had to make a few exceptions due to mapping but overall I'm happy

if anyone knows how to make the rim blur correct on this please do let me know, no matter what i do i cannot get them to blur white. the spokes always have a black blur to them. If you blur the wheels in CM it brings up a different .png file which i thought was what i was looking for but like i say no matter what i do it wont work.

Tvr Sagaris Britcar 24hr loose replica 2k/4k

I have included a kn5 file only due to having to change 2 shader values on the wheels and windscreen. nothing else has been touched. based on a real car on a real event but due to very few pictures and the ones i could find being very low...

www.gtplanet.net

 

[Haunebu52]

Quick question - Anyone have any idea why my Content Manager crashes so much when creating/editing/managing AI rosters? It happens way more than it should... when building a season's worth of rosters it freezes and crashes like every 3rd race. Every few minutes or so. It's been happening for awhile. Any ideas?

Edit: UPDATE - Content Manager actually just caused a FULL LOCK on my system, first time that's ever happened. Mouse froze, full system freeze. Had to restart with the power button. Happened when I clicked the "Detailed Settings" button for Opponents in CM. What's the deal?? I noticed CM updated itself today and this is the first time I've ever had CM completely boof my system.

 

[JK1977]

Tvr Sagaris Britcar 24hr 2010 loose replica (2-4k)

To install: choose which res you want then drop the "content" folder into CM

I have included a kn5 file only due to having to change 2 shader values on the wheels and windscreen. nothing else has been touched.


based on a real car on a real event but due to very few pictures and the ones i could find being very low quality, I have used a few different pictures to work from each pic slightly different variation of the same livery. There was only 1 picture with the same body the rest were fairly different. Had to make a few exceptions due to mapping but overall I'm happy

if anyone knows how to make the rim blur correct on this please do let me know, no matter what i do i cannot get them to blur white. the spokes always have a black blur to them. If you blur the wheels in CM it brings up a different .png file which i thought was what i was looking for but like i say no matter what i do it wont work.

Tvr Sagaris Britcar 24hr loose replica 2k/4k

I have included a kn5 file only due to having to change 2 shader values on the wheels and windscreen. nothing else has been touched. based on a real car on a real event but due to very few pictures and the ones i could find being very low...

www.gtplanet.net

View attachment 1327385

looks fantastic !

 

[kakauiyt]

What does that mean?


What does that mean??

nevermind, will finish it tomorrow morning

 

[Fanapryde]

Hi Fana,

What is your "collected info"? Other than the real names for UI, is there anything else? It has been some time since I last added anything to these cars, and I've forgotten any important add-ons.

I always like to have a full description of the car in the ui.
and I also had corrected/improved brakes for most of them, but forgot from who and I was stupid enough to delete the previous version with the changes, before I remembered this...
Need to find the brake improvements again... unless DRM has done that too, still need to check the changelog and test them.

 

[maximeerkat]

looks fantastic !

thanks mate, thankyou for making it . I had a bit of fun for sure!.

Do you know how to make the rims blur? i have painted the wheels white and the spokes appear black when in motion. I have used the "wheel2.png" but that doesn't seem to do much. It will be me missing something i am sure.

 

[Gabriele]

It can be activated by open the app in the side bar, think that could be your missing link.

Thanks...but it doesn't work. Procedure:
Unzip Mod
[...] apps-->lua--> copy to lua "rolling start"
In the tracks folder I modify the "surface.ini" parameters of the chosen circuit. But it doesn't work, the part always remains stationary. In Content Mnagare "rolling start mod" does not appear

 

[maximeerkat]

sorry forgot the rollcage. doh!

add the .dds file to the skin folder to apply

File on MEGA

mega.nz

 

[PJohann]

~snip

Output steering forces to wheel: Acitve and peak torque to 5nm

This. Car has necessary pieces of code to output actual full steering force. Unless you are sporting really high end gear with tons of torque, this car's FFB at 100% will easily overwhelm your steering wheel. So better keep this feature disabled.

 

[Danbowlghini]

As some of you may already know, we are distributing the Italdesign Calà Concept (Lamborghini Calà) as a beta test. It's still under development, so please play with patience.

Beta testing of ITALDESIGN Calà has started!! | Danbowlghini Modding Project

Get more from Danbowlghini Modding Project on Patreon

www.patreon.com

By the way, the next new MOD is that Knight Commander...!

 

[The-King]

Is it possible to get water splash effect to work when you drive through it on this track?



Link to car incase anyone wants it.

2016 ISMA Super Modifieds | AssettoNASCAR

Get more from AssettoNASCAR on Patreon

www.patreon.com

 

[Den_88]

Is it possible to get water splash effect to work when you drive through it on this track?



Link to car incase anyone wants it.

2016 ISMA Super Modifieds | AssettoNASCAR

Get more from AssettoNASCAR on Patreon

www.patreon.com

I would like to check how the water will behave.

 

[The-King]

I would like to check how the water will behave.

Edited link to official one

Download rmi dirt3 smelter

Download File rmi dirt3 smelter

sharemods.com

 

[noroardanto]

I have this exact same issue. Have you found a solution yet?

Please see this:
Problem solved by Masscot

 

[RMi_wood]

Is it possible to get water splash effect to work when you drive through it on this track?

I would like to check how the water will behave.

Should be this one.

DiRT3 Smelter | Download Free Track Mod - Assetto Hub

Download for Free DiRT3 Smelter track mod for Assetto Corsa. Enjoy!

www.assettohub.com

Sorry, I am not aware of how to make the water react/splash

here is the official link:

Download rmi dirt3 smelter

Download File rmi dirt3 smelter

sharemods.com