Assetto Corsa PC Mods General DiscussionPC

[maximeerkat]

Fun car to drive, I love seeing/feeling the inside rear wheel lifting... 👍

yeh i have had great fun with this car also. Had it for a fair while now easily 4-5 months i only noticed the missing panels a week ago while i was hiding things in the interior, took me a while to figure out it wasn't something i done accidentally. I'm not sure who did the physics but like i say I've had a blast even if it's only on a controller. Glad you are enjoying it

A VR problem with this car has always been the sundial speedo and tachos. Those needles could poke your eye out if you're not careful.
Any chance these could be aligned parallel to the faces of the dials?

if i knew how to do this i would 100% do it right now for you no question. But i haven't a clue im affraid. Unfortunately my skill level is very narrow at the moment

 

[gtrNL]

This is pretty good, the blurred rim looks weird in replay a bit because you can see through things, but when you take photos without the blurred rim it doesn't do that. BoP wise it seems slightly off the pace to VRC P1 cars.

Would be cool if someone can update the 2016 Audi then we would have all the latest P1 cars.

Thanks! I'll put that on the list to fix for a next version.

 

[Jezza819]

I don't know how CM works when it unzip, where it put the folders.

I always recommend to install stuff manually to be sure that folders goes in the place they should be

Yeah I know, and I've been told over and over again, "Don't use CM to install stuff, always do it manually!!" But I'm so afraid of not doing it right when doing it manually. I'm unsure where things are supposed to go, I lose track of them, etc. So if I have an option of just dragging and dropping I would rather try that first. It seems less complicated especially when I'm not that computer file savy to begin with. But I'll try another complete uninstall then do it manually to see what happens.

But when I try this, I should just manually move your your complete downloaded file into "content" then "cars" and everything should work?

 

[jaqory]

If everything works like it should, this little american car should be ready in the next month
hope you are excited and will like the Corvette
View attachment 1321490
View attachment 1321491
View attachment 1321492
View attachment 1321493
View attachment 1321494

#3,#4,#33 from ALMS 2007; #63 and #64 from 24h Le Mans and the #03 from Racedriver Grid are already included in the car Release

"5 MONTHS IS LONG ENOUGH, THAT'S IT!"

I've been waiting for chem's corvette to come out, but now that patience is gone. Introducing a new banger from the Corvette skinner himself. I'll be continuing to support F302's C6.R. Here is the link, hope you guys enjoy the pack: https://www.racedepartment.com/downloads/gold3ns-corvette-c6-r-livery-pack.67307/

Here is the link to F302's Corvette C6.R: https://www.mediafire.com/file/lq42g1g1fbdmvpd/f302_corvette_c6r_2006.zip/file

 

[Kurt Woods]

I started on these skins for the Mclaren 720 GT3 ACC by whistleblower39 as grid fillers and thought I would share them for anyone interested.

https://mega.nz/file/20xEUKpK#qQkNAFWMECSZXIT_Vu-xFb05n15kfMmL5gI59q0IIdA

 

[Breanuts]

Hey guys need help my ac started to load like this randomly and I can't seem to find a fix. Hope ya'll can help View attachment 1330964

This happened to me last week after a Windows update. I had to uninstall and reinstall AC.

 

[RacingManiac]

"5 MONTHS IS LONG ENOUGH, THAT'S IT!"


I've been waiting for chem's corvette to come out, but now that patience is gone. Introducing a new banger from the Corvette skinner himself. I'll be continuing to support F302's C6.R. Here is the link, hope you guys enjoy the pack: https://www.racedepartment.com/downloads/gold3ns-corvette-c6-r-livery-pack.67307/

Here is the link to F302's Corvette C6.R: https://www.mediafire.com/file/lq42g1g1fbdmvpd/f302_corvette_c6r_2006.zip/file

Thanks for this!

 

[Tummie555]

yeh i have had great fun with this car also. Had it for a fair while now easily 4-5 months i only noticed the missing panels a week ago while i was hiding things in the interior, took me a while to figure out it wasn't something i done accidentally. I'm not sure who did the physics but like i say I've had a blast even if it's only on a controller. Glad you are enjoying it


if i knew how to do this i would 100% do it right now for you no question. But i haven't a clue im affraid. Unfortunately my skill level is very narrow at the moment

I'll have a go at the sundials. I'll DM you the altered version.

 

[jac0]

I had noticed the same issue with some of the cars. By chance I figured out that when "Cutting" the car folder to my Desktop, and then "Copying" it back to the ac cars-folder, it solved the issue most of the times. (this creates a fresh new timestamp for the "creation/modified date" of the folder. Nothing else changed inside the folders. ) It worked for flipped mirrors, blurred mirrors and rotated mirrors.

This did the trick!!
Thanks so much , I was searching for any file that was written in assetto folder or anywhere, but couldn't find the workaround.


( I hope this will give a nudge for a fix for this in a next CSP version, so this workaround will become unneeded )

 

[Fanapryde]

Update for AKV8 Gold Coast track ,

Logo and freshly made sections file

 

[YOMISMODEMI]

Greetings to everyone, I wanted to share this JAGUAR XJ6 mod that I improved, created by Speed90 but which they abandoned some time ago...
I have improved the shaders, the skins are now paintable via CM, the skins all have original colors, the windshield wiper blades now both work, the windows are ready for rain even the rear ones, the headlights are now reflective. There is still a lot of work to do and I hope that some members will take the initiative to further improve this mod which I believe is a good starting point.
The physics have not been touched and neither has the 3D model
The author can request the removal of the mod at any timeView attachment 1331308

thanks for this!! The only thing that bugs me is that in the other version I have of the car, you can see the "spokes" of the wheel, and in yours, they seem..."hollow" (as you can see in the video). Can you fix that?

 

[Quikslvr]

I've been noticing an issue at the Grand East, Grand West, and South courses at Virginia International Raceway where the AI come into the Spiral too hot, overshoot the initial downhill left-hander, and take to the grass. SaxoKyle addressed this issue at the Grand East Course as part of his recent VIR 48-pit mod, and I've corrected it for the Grand West and South layouts. Just drop these ai_hints.ini files into their respective data folders. There are no ai_hints files for those layouts by default, so you won't be overwriting anything.

 

[Bart Bowles]

thanks for this!! The only thing that bugs me is that in the other version I have of the car, you can see the "spokes" of the wheel, and in yours, they seem..."hollow" (as you can see in the video). Can you fix that?

On my end, it happens with the original car too, once it reaches a certain speed...

 

[BruceD]

not any formula car, a 2010 one !

Quite happy to finally see professionals doing 2010 cars. That era is really underrated and i don't understand why it has been ghosted for so long until i arrive

But we have your great mods with individual shapes and physics and not kill-my-pc levels of details that I can't run a full field with.

 

[Jaba12]

On my end, it happens with the original car too, once it reaches a certain speed...

Just remove blurred_objects.ini from data folder and it's good to go

 

[Alguecool]

Thank you Carmar

De Tomaso P70 WSC spec, 3 cars skinpack, 2k+3k+4k

All my skins for the De Tomaso P70 WSC spec in one package. These skins are fictional, but have borrowings from real teams. If there are new skins and updates in the future, I will update this package. You need the De Tomaso P70 WSC car-mod from...

www.racedepartment.com

 

[Kwara]

thanks for this!! The only thing that bugs me is that in the other version I have of the car, you can see the "spokes" of the wheel, and in yours, they seem..."hollow" (as you can see in the video). Can you fix that?

I'm glad you liked it, here is the updated link with the fix, I removed blurred_objects.ini as recommended by Jaba12 and now everything is ok
Link:

 

[Nabil Gasmi]

here you go , a copy which includes some chameleon skins I did already (cause I'm addicted to it )

the "pearl" one came out esp nice I think ...
View attachment 1312087View attachment 1312089
View attachment 1312090

EDIT: and there was also an LM version included , a copy of that one can be found here

beware the digital instruments have floating texts ! (haven't gotten arround to fixing that yet)
for example:
View attachment 1312088

If someone fixed this already , please share !

Hi, everybody, can someone share this car, the link doesn't work on Racedepartment.

Please

 

[RMi_wood]

I love that they call this a Vision car when there are no side windows. That is one horrible cockpit view they've given us. Makes the car pretty useless as a car.

Of course it has no side windows... it is obviously for single-screen users only.

 

[kakauiyt]

Yeah I know, and I've been told over and over again, "Don't use CM to install stuff, always do it manually!!" But I'm so afraid of not doing it right when doing it manually. I'm unsure where things are supposed to go, I lose track of them, etc. So if I have an option of just dragging and dropping I would rather try that first. It seems less complicated especially when I'm not that computer file savy to begin with. But I'll try another complete uninstall then do it manually to see what happens.

But when I try this, I should just manually move your your complete downloaded file into "content" then "cars" and everything should work?

drag both folders content and extension inside the assetto corsa folder

 

[The-King]

Ninja edit -

Red Bull | Bahrain F1 2024 Pre-season Tests | Night​

 

[Nabil Gasmi]

De Tomaso P70

Features : - Scratch-made 3D model, with around 10% of parts adapted and modified from Kunos's original Ford GT40 and Shelby Cobra, for accurate referencing, essentially. The rest is mostly pictures based, so inaccuracies may be expected. -...

www.gtplanet.net

Thanks for your reply but it's not this car i'm looking for, it's the TRD DRW12 by iballobar13 and Jac0 made skins for it.

Btw thanks for your reply.

 

[alexlockout]

small update

Assetto Corsa PC Mods General Discussion

Question for the car modders. What could make a specific ai car completely miss a high speed turn and slide right through it like they are not even seeing the ai line. It's not the ai line because all the other cars take the turn with no issue. I'm hoping it's something in the car's data.acd...

www.gtplanet.net

 

[jac0]

Hi, everybody, can someone share this car, the link doesn't work on Racedepartment.

Please

here is a copy of that TRD DRW12 Gr.C

I fixed the digital instruments in the mean time , but there is still quite some issues , main one sticking out for me is the right side window that is too "milky" ...

Only diff I see between right and left window is this triangle count

IF someone could do a workaround for that window , it would be much more enjoyable...

 

[Nabil Gasmi]

here is a copy of that TRD DRW12 Gr.C
View attachment 1331503

I fixed the digital instruments in the mean time , but there is still quite some issues , main one sticking out for me is the right side window that is too "milky" ...

Only diff I see between right and left window is this triangle count

View attachment 1331501
View attachment 1331502

IF someone could do a workaround for that

window , it would be much more enjoyable...

Thank you very much, have a good Day.

 

[Piresdiogo]

Good morning
Anyone having problems with the virtual mirror (F11)?
Here, this is without reflection...

 

[Bob Jackson]

hey people.

my tires do not produce smoke with tire Lockup or burnout csp 2.0 all is turned on at max, tried turning off etc nothing works.
any tips?

no help guys?????????

 

[andrevr]

Just spent about an hour and a half, troubleshooting a over-loud road car, which wouldn't respond to [AUDIO_VOLUME] changes in ext_config.ini

Finally the lights came on. It's a roadster, so modder-man made the sound that the driver hears, ENGINE_EXT, instead of what I was adjusting, namely, ENGINE_INT.

How's your day going?

 

[maximeerkat]

here is a copy of that TRD DRW12 Gr.C
View attachment 1331503

I fixed the digital instruments in the mean time , but there is still quite some issues , main one sticking out for me is the right side window that is too "milky" ...

Only diff I see between right and left window is this triangle count

View attachment 1331501
View attachment 1331502

IF someone could do a workaround for that window , it would be much more enjoyable...

strange, i downloaded this car and i dont have a milky window like you. the drivers window does appear to have a bit of a tint but its not milky

the inside of the side windows do not seem to be mapped either. This is what i have, bad pic but you get the idea you can see the tint that i am talking about. Also i noticed in CM showroom the passenger window is just clear looking but on the other side it has a weird glass texture to it on the outside

 

[GT3Masters97]

I expected that. At least, my dear EASY, you could do AO skins for real. The rest was already there

For clarity, I don't want to offend him. I think I was clear when I said that just write to me for any changes etc. The mod is free, he put it on his site and amen. But it would be advisable not to write things in the changelog that are not true or that he didn't do.