as I run saved quickdrive presets that ran fine before (without ai pitting after 1 lap) , I don't think it's starting fuel... but thanks for the tip , I will check on this later this evening...
Well, for me the star is not visible in previews, not in showroom and not in game eitherThe Mercedes star is part of an extension for the car made by Chemflummi. It's included in several skin packs for the car.
For example:
Haupt Racing Team AMGs 2021-2023
This pack contains a selection of cars run by Haupt Racing Team across 2021, 2022 and 2023 for the Race Sim Studios Mercer V8 (Mercedes-AMG GT3 EVO). At the moment, the pack includes: - 2021 DTM 4 BWT car driven by Maxi Götz - 2021 DTM 5 Bilstein...www.racedepartment.com
Yes, there is.
Hello,Well, for me the star is not visible in previews, not in showroom and not in game either
And it's really bugging me, which is why I'm using the Racing Rat version where the star shows in all the above.
View attachment 1335458
This skin doesn't even have a ext_config.ini in the folder...
So I added one with the code you mentioned: no star in game...
www.racedepartment.com
Thanks, trying to figure out what I8 need to do. I have the AMG55 anniversary skin too, it does have the ext_config.ini, but I still have no visible star in game, only some dark spots where it ids supposed to be:Hello,
I had the same problem yesterday. I've just add the haupt racing texture and the star appears.
It just even show on skins like the G55 edition:
AMG 55 annyversary edition skin
The extension config file isn't in the car folder but in "assetto corsa\extension" folder.
Just copy the "extension" directy you'll find in the Haupt livery to your assetto corsa.
Hope it will help.
if you use Pure , in Pure config app you can change the overall brightness (and I believe there is a way to save it per track , but not sure about that one... check out the Pure Config app in-game!)
here a copy for you (drag & drop in CM should work)
the skins in the mentioned skinpack do contain a ext_config.ini , and if you want the star in the other skins , you need to copy this part into a ext_config.ini file in any skin you want to have the star :Well, for me the star is not visible in previews, not in showroom and not in game either
And it's really bugging me, which is why I'm using the Racing Rat version where the star shows in all the above.
View attachment 1335458
This skin doesn't even have a ext_config.ini in the folder...
So I added one with the code you mentioned: no star in game...
sorry mate, my bad probably (I have V2 of the car installed btw), but none of the files you are showing is present in the Haupt (or other) skin file for the rss_gtm_mercer_v8 that I have.Nor did I have the ...>cars>cf>RSS mercer tree...
you can install my chameleon skin if you want ... download can be found hereThe BAC mono is awesome fun! (Thankyou Fuzo and ReBoot guys!) Does anyone know of any skins for it?
I found this very pretty one on Racedepartment:
View attachment 1335484
View attachment 1335485
Blood Rose BAC Mono Fantasy Skin 4k
BAC Monos are fun fast and furious. Here's a custom wrap made of Bloody Roses. Thanks to @blackcelica for the Senna driver gear. This prolly won't be the last Mono I make. Drive it like you stole it.
Everthing else I found seems to be for some other mod of the car
it's not in the skin file directory.
No need to edit an ext_config.ini file in the livery or in the car or the skin folder.
Who has made that?
www.gtplanet.net
Hopefully this will do the trick for you. Just slightly darker textures in attempt to make it a little more realistic without having to change your pp filter settings which would also affect the sky and cars etc.
www.gtplanet.net
London ePrix Season7 v1.01
View attachment 1335137
The Formula E London ePrix was held with two back to back races at ExCel, in July 2021 with part of the circuit running around the arena and part of the circuit in the exhibition hall itself. (Wikipedia)
Conversion from rFactor2.
-CSP recommended
-26 pit/start
-AI, cam
NOTE; If you are using Sol and the track screen is dark, rename ext_config_for_sol.ini to ext_config.ini in the extension folder.
Credits & Thanks;
rFactor2 Original Track by Garitt Gibsn and Errol Prefet
-Thank you for giving me permission
AC Converted by @shi (shin956)
Crowds texture by @Kniker97
marshall, cameraman and some textures by kunos
Download (mediafire)
Enjoy.
Converted upon request by Patreon member Leo_J and Denver Thurston.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;
-Fixed problem with guardrails not being walls.
Okay guys, I've been adjusting all Simdream 1982, 1983 and 1984 cars. I have created ai engine failures for the 1982 year, removed all other tyremodels but supersoft (because the cars weren't competitive during the races with them). I also slowed down the refueling process. Sure it's not realistic to race with QF tires but beggars can't be choosers. With race tyres those cars were SLOW, believe me. Now they're extremely competitive.
Creating seasons for all these turbo years. The cars that did not have turbos, I have removed them. I have watched those real F1 turbo era races so much that I almost remember every result of each race GP. LOL.
Here's my 1982 experiment.
Assetto Corsa PC Mods General Discussion
Interesting. I turned the options off in the new ai behaviour for "rain awareness" and "extra options for ai splines" and slowly added them back one by one and now it works with all of them on :confused: Going to give it some more testing.
1982 didn't have any wet races.
Monaco 1983 was a rain race (light rain) so there's light rain in the season. Keke Rosberg won that race with slicks with that awful Williams (one of the most incredible and underrated drives in F1 history).
Monaco 1984 was heavy rain race which Prost won because the race was red flagged. That was the race which brought Ayrton Senna to the fame. He almost won the race with a lowly Toleman but Prost was saved by the red flag. Of course I'll add that.
Season races are 20-30 laps and I have also adjusted from the car data that the max fuel amount for each car is 20-28 liters. There's variation so that the ai cars will pit during the 7-17 laps during the race. You don't need any apps or extras for that.
They WILL pit in each race and you have to pit too.
This has added a lot of challenge and excitement to these seasons.
I have perfect track collection including Long Beach, Caesars Palace, Dijon, Dallas, vintage Zolder, etc. All free tracks.
I actually have the vintage Zandvoort too but for whatever reason that track doesn't work with Simdream cars. It's a total accident mayhem if you try. LOL.
Say what you want about these cars but with some major tweaks at least the seasons become really enjoyable. Basically the physics are from Kunos Lotus98T so there's nothing to complain about.
I have no idea what is the policy. Everyone dislikes SimDream and you absolutely have to get the modded cars to play these. In their default form they're useless. Can I share them here? (These seasons aren't ready yet, lots of testing left). But they're becoming very realistic results wise. Adding mandatory pitstops really made them even better.
Check this Detroit race. I started with low fuel on purpose because I thought I could pass pole sitter Tambay on the start. Didn't work out and Piquet overtook me too... I was stuck in the 3rd position behind Tambay (Ferrari) and the eventual 1983 champ Piquet (Brabham). And since it's very difficult to overtake in Detroit I decided to pit after the 6th lap and take enough fuel to complete the race. I hesitated a little in the pitlane and despite clocking pretty good exit lap Tambay managed to come from the pits in front of me.
Adding mandatory pitstops was a real game changer for me. Now I can add 20-30 lap races to the season.
Driving with Rene Arnoux (Ferrari 1983).
Here's the rss 01 skins with the modified ext_config to show the logo: Skin 01
;/////////////You should carry these or similar settings over to any custom liveries
[INCLUDE:cf/RSS_Mercer/Mercer_Logo.ini]
; The code below tells CSP to load up the Endurance lights.
[INCLUDE: rss/rss_gtm_mercer_v8/enduro.ini]
; You can lose the headlight flash effect and use the laser light as a low beam by activating the code below
; [BASIC]
; IS_LOW_BEAM_AVAILABLE=1
; IS_HIGH_BEAM_AVAILABLE=1
; [EMISSIVE_LOWBEAM_0]
; NAME=GEO_BAR_SPECIAL_FRONT
; COLOR=70,70,60,1
; OFF_COLOR=0,0,0
; SIMULATE_HEATING = 0.3
; LAG=0.5
; LOCATION = FRONT
; ACT_AS_HEADLIGHTS = 1
; CAST_LIGHT=1
; CHANNEL = 0
; Lights
[EMISSIVE_LIGHT_...]
NAME=GEO_Door_Plates_L
COLOR=0.5,1,0.5,1
LAG=0.65
SIMULATE_HEATING=1
ACT_AS_HEADLIGHTS=0
[EMISSIVE_LIGHT_...]
NAME=GEO_Door_Plates_R
COLOR=0.5,1,0.5,1
LAG=0.65
SIMULATE_HEATING=1
ACT_AS_HEADLIGHTS=0
[EMISSIVE_LIGHT_...]
NAME=GEO_Banner_LED_A
COLOR=0,0,1,38
OFF_COLOR=0,0,0
SIMULATE_HEATING=0
LAG=0
[EMISSIVE_LIGHT_...]
NAME=GEO_ROOF_STRIP
COLOR=0,0,1,38
OFF_COLOR=0,0,0
SIMULATE_HEATING=0
LAG=0
[EMISSIVE_LIGHT_...]
NAME=GEO_BUMPER_STRIP
COLOR=0,0,1,38
OFF_COLOR=0,0,0
SIMULATE_HEATING=0
LAG=0
[EMISSIVE_LIGHT_...]
NAME=GEO_ARCHES_LED
COLOR=0,0,1,38
OFF_COLOR=0,0,0
SIMULATE_HEATING=0
LAG=0
[EMISSIVE_LIGHT_...]
NAME=GEO_BUMPER_STRIP_REAR
COLOR=0,0,1,38
OFF_COLOR=0,0,0
SIMULATE_HEATING=0
LAG=0
;Remove the comments below here to get glow to the LEDs
[EXTRA_FX_EMISSIVE_...]
MESHES=GEO_Banner_LED_A, GEO_ARCHES_LED, GEO_BUMPER_STRIP, GEO_BUMPER_STRIP_REAR
RANGE = 0.16
COLOR=0, 0, 1, 0.1 ;if using values in 0-255 range, take extra care with the 4th parameter
DIRECTED = 0
SPLIT_ELEMENTS = 1
SPLIT_THRESHOLD = 0.01
NORMAL_SHIFT = 0.01
EXTERIOR_ONLY = 0
[EXTRA_FX_EMISSIVE_...]
MESHES=GEO_ROOF_STRIP
RANGE = 0.05
COLOR=0, 0, 1, 0.05 ;if using values in 0-255 range, take extra care with the 4th parameter
DIRECTED = 0
SPLIT_ELEMENTS = 1
SPLIT_THRESHOLD = 0.01
NORMAL_SHIFT = 0.01
EXTERIOR_ONLY = 0
[EXTRA_FX_EMISSIVE_...]
MESHES=GEO_BAR_SPECIAL_FRONT
RANGE = 0.09
COLOR=0, 0, 1, 0.06 ;if using values in 0-255 range, take extra care with the 4th parameter
DIRECTED = -1
SPLIT_ELEMENTS = 1
SPLIT_THRESHOLD = 0.01
NORMAL_SHIFT = 0.03
EXTERIOR_ONLY = 0
[EXTRA_FX_EMISSIVE_...]
MESHES = GEO_DISPLAY_PANEL ; list of meshes
MATERIALS = LED_Display_LK ; list of materials
DIRECTED = 0.7
RANGE = 0.2
[EXTRA_FX_EMISSIVE_...]
MESHES = GEO_DISPLAY_FACE ; list of meshes
MATERIALS = INT_Display ; list of materials
DIRECTED = 0.95
RANGE = 0.15
; [EXTRA_FX_EMISSIVE_...]
; MESHES = GEO_text_display ; list of meshes
; MATERIALS = Display_Icon ; list of materials
; DIRECTED = 0
; RANGE = 0.01
;Emissive Dash button glow and external
[EMISSIVE_LIGHT_...]
NAME=GEO_DASH_GLOW
COLOR=1,1,1,1
OFF_COLOR=0,0,0
[EXTRA_FX_EMISSIVE_...]
MESHES = GEO_DASH_GLOW ; list of meshes
MATERIALS = DASH_GLOW ; list of materials
DIRECTED = 0
RANGE = 0.01
The usual purveyors of low effort, unauthorised and overpriced GPL/rFactor/GTR2 mod conversions. You're better off painting a Mini red than downloading that one IMO
One of my favourite ever mods - chuffed to see these updates - it sits so much better now!
