Assetto Corsa PC Mods General DiscussionPC

[kakauiyt]

we take the names of objects from here
View attachment 1369415

yeah but i mean if i named the disc object DISC_LF can I just use that name in the file? Because if not and that I have to change the disc name for all cars it'll be a big pain

 

[alexlockout]

Because if not and that I have to change the disc name for all cars it'll be a big pain

Naturally, there is no need to change the names of objects in kn5! we just take the names of the objects of each disk (shown in the screenshot) and write them in brakes.ini
to lines
DISC_LF=
DISC_RF=
DISC_LR=
DISC_RR=

 

[kakauiyt]

Naturally, there is no need to change the names of objects in kn5! we just take the names of the objects of each disk (shown in the screenshot) and write them in brakes.ini
to lines
DISC_LF=
DISC_RF=
DISC_LR=
DISC_RR=

no i don't think you understand.

The name of the disc is DISC_LF

so DISC_LF=DISC_LF ?

 

[X90]

You know which GT tracks to AC would be cool ? Cape Ring / Circuito de la Sierra / Circuito de Madrid / Circuito di Roma / London / Matterhorn.

The often forgotten tracks. But that's just wishful thinking

Sardegna.

 

[racinjoe013]

This can happen if there is an incorrect value in car.ini in the line
STEER_RATIO=
For some cars, positive STEER_RATIO values are relevant, for others - negative. in other words, if there is a problem, simply add a minus (-) in front of the given value, or vice versa, remove it.

Thanks. Will give that a try.

 

[alexlockout]

so DISC_LF=DISC_LF ?

I understand everything, yes, enter DISC_LF if this is your object name for the disk.
here is an example with Lotus from my screenshot from the first post, there is the name of the object DISCBRAKE_LF_mesh, this is the name we write in DISC_LF=
[DISCS_GRAPHICS]
DISC_LF=DISCBRAKE_LF_mesh
DISC_RF=DISCBRAKE_RF_mesh
DISC_LR=DISCBRAKE_LR_mesh
DISC_RR=DISCBRAKE_RR_mesh

 

[Gregz0r]

You know which GT tracks to AC would be cool ? Cape Ring / Circuito de la Sierra / Circuito de Madrid / Circuito di Roma / London / Matterhorn.

The often forgotten tracks. But that's just wishful thinking

Being a Londoner, having an accurate version of that Piccadilly Circus/Shaftesbury Avenue/Charing Cross Road/Trafalgar Square/Haymarket area has been a dream of mine for many years.
The Grid versions are very fictional.

I think there's a conversion of Eiger Nordwand out there. I already have Tsukuba and Tokyo R246 GT Sport conversions.

 

[StoffelWaffle]

Sardegna.

That one too ! But I'd like to see tracks I can't race on since my PS3 died years ago lol.

 

[alexmpoland]

You have to disable "Dynamic shadows" in "Lighting FX"

You have to disable "Dynamic shadows" in "Lighting FX"

You're right, well it "helped", but at the same time it took away one (dynamic shadows) of the things that make this game so realistic. Sad

 

[GT3Masters97]

no i don't think you understand.

The name of the disc is DISC_LF

so DISC_LF=DISC_LF ?

In theory there shouldn't be any problems, after all it's an equation. DISC_AB (generic, replace AB with any position) is the keyword that makes Assetto Corsa understand that it is a brake disc and must behave in a certain way. Anything equal to DISC_AB is valid, even DISC_AB.

So if you choose DISC_LF as the name of your left front brake disc, AC will understand that DISC_LF is the mesh relating to the left front disc to be associated with the DISC_LF keyword.

 

[alexmpoland]

I just installed the new Pure 1.40 and did a comparison to the default linear mode.
For me personally, the greenery in the defalut LCS version looks more realistic, especially the penetration of light between the leaves. Overall, for my eyes, image is more crisp. Am I the only one who notices this?
Peter, what makes this difference?

1. standard Pure + pure PP
2. linear Pure + pureLinear PP
3. default LCS + Vision Reality LCS 1.0 PP
4. default LCS + pureLinear PP

 

[Peter Boese]

I just installed the new Pure 1.40 and did a comparison to the default linear mode.
For me personally, the greenery in the defalut LCS version looks more realistic, especially the penetration of light between the leaves. Overall, for my eyes, image is more crisp. Am I the only one who notices this?
Peter, what makes this difference?

1. standard Pure + pure PP
2. linear Pure + pureLinear PP
3. default LCS + Vision Reality LCS 1.0 PP
4. default LCS + pureLinear PP

With the new Pure LCS 0.4 please just use the "pure" or "purerCandy" ppfilter! "pureLinear" is just a ppfilter for Pure Gamma and will just use the standard script in Pure LCS.

Actually the default wfx has a problem. Its fog setting always produce a blue tint on the picture and this mixes with the sunlight to green. So if you like this you can adjust the "distant fog exponent" to 0.5 in Pure Config app "Fog" tab.

But i don't think this is right and why should there be a green overall tint. I calibrated Pure Gamma and Pure LCS to produce neutral pictures with a histogram and thats my attempt to build a very precise and neutral base for modders. If someone like a tint or overall behavior, he can build a ppfilter mod which does this.

this is the default wfx:

This is Pure LCS

Both with the same filter

 

[kakauiyt]

In theory there shouldn't be any problems, after all it's an equation. DISC_AB (generic, replace AB with any position) is the keyword that makes Assetto Corsa understand that it is a brake disc and must behave in a certain way. Anything equal to DISC_AB is valid, even DISC_AB.

So if you choose DISC_LF as the name of your left front brake disc, AC will understand that DISC_LF is the mesh relating to the left front disc to be associated with the DISC_LF keyword.

well i guess it doesn't because it's not glowing under heavy braking. I'll try with another name

 

[RMi_wood]

That one too ! But I'd like to see tracks I can't race on since my PS3 died years ago lol.

Works great...

RPCS3 - The PlayStation 3 Emulator

RPCS3 is a multi-platform open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows, Linux, macOS and FreeBSD made possible with the power of reverse engineering.

rpcs3.net

 

[JK1977]

W.I.P. 2002 Nissan Silvia Spec-R AERO Touring Car (GT6 model)

 

[skyline gt-r34]

hi, i have a questin, i will simulate the 1998 or 1999 lemans 24h, i see a video with grid preset, but the AI it's very stupid in some corner and the BoP it's wrong, exist a mod with this bug fix?? thanks!

 

[Masscot]

Hi, I'm pleased to announce the public release of my 2nd track, Grand Valley Speedway for Assetto Corsa.
36 pits, Decent AI, Grass and Rain fx, 4 layouts (complete, east and their respective backs)
You can download it right now for free on my patreon (pinned post), link in the video description.
By the way, next Sunday I'll be doing an online track day, I haven't decided the time but I'll soon announce it on patreon along with the details (obviously free post), so if you want to participate stay tuned.
If you like what I do and want to support me you can subscribe to some of the levels and get benefits like early access to tracks in development, voting on the next track, or billboards with your names/logos.
Finally here is the video:

Awesome job!
I added a few things to your preview version to add a bit of life which should also work on v1.1.
From memory: new crowd textures, animated flag-waving spectators (with GT-themed flags), animated blimp, helicopters, GT-themed balloons, crowd/pits audio, fence/tree configs.
I can post it if you want and you can grab anything you might want for v1.1?

Sardegna.

Indeed.
Plus Alsace and Kyoto.
All three done to the same standard as Lago Maggiore and St Croix would be very worthwhile additions.

Gran Turismo Sport Tracks List

www.gran-turismo.com

 

[Xavithehobbit]

I would like to see Tokyo expressway in ac. I know existed shuto but I would love to see another track in the Tokyo highway.

 

[Alguecool]

no i don't think you understand.

The name of the disc is DISC_LF

so DISC_LF=DISC_LF ?

That shouldn't make any trouble, you could read it as DISC_LF.null and DISC_LF.mesh, even if the name is the same, the "extension" and purpose is not, so the software doesn't read it in the same way.
Maybe try to change the mesh's name for just one car first and see if that does change something, for exemple with the same reference name as Kunos (doesn't remember what is it, probably somewhere in the car guideline)

Upper/lower case is important, also. Already did this mistake myself too. My worst one was brakedisc_LF instead of brakedisk_LF. Felt veeery stupid for a minute.

 

[X90]

Indeed.
Plus Alsace and Kyoto.
All three done to the same standard as Lago Maggiore and St Croix would be very worthwhile additions.

Gran Turismo Sport Tracks List

www.gran-turismo.com

Ah, Kyoto Park.

Wheel-to-wheel on the chicanes meant instant death if you were below B license.

Memories.

 

[LordBolton]

Need some help troubleshooting a problem with the V8SCorsa mustang: a flickering shadow on the inside of the windscreen decal.



I've tried toggling various shadow categories in CSP settings without any luck, however since I don't get this problem with any other car I suspect its a problem with the mod rather than my settings.

Posting for posterity if anyone else is looking for the solution:

From the Content Manager preview, move the camera inside the car and click the windscreen banner decal, toggle transparent to YES & save.

 

[racinjoe013]

Couple of people asked me about Istanbul Park so I threw some stuff together quickly just to see what was possible. Don't judge too harshly, it's just a start. Things I tried so far were a new grass texture setup, a vao patch to help with the look of the trees and tree shadows and I added some trees on the outskirts to get rid of that dead space look. Still a long way to go because the track has a number of small problems that need looked at.

Sorry for the poor quality pics. I'm not good at resizing images without losing quality.

Before:

After:

 

[Tarquini111]

I'm having the same problem and I've tried everything to try and get the app to work. I've uninstalled it and redownloaded, manual install, CSP 2.4 preview, CSP 2.3, different types of cars, different types of tracks, enabled all extended physics in CSP settings and the extended physics on the race now screen in CM. I even tried old versions of the app, from 2.6, 2.7 and 2.8. Also tried starting the AI on different compounds, pitting them on different laps, ect. Nothing I do seems to work for me.

The problem is that for the first time since the start of the year Nuzzi seems out of the project... it's been nearly a month since his last post and he also doesn't answer to my private message on Patreon... let's hope he's on a holiday and that he will comeback 'cause this app is one of the best thing ever happened to this game, it can't be left like this

 

[SoulMaTriX]

Dumb question... Where in CM is LCS located? I just went line by line and cannot see it. Running 0.2.3. I saw it before, but my eyes cannot see it now!

Edit: Because I had the Pure LCS under weather style selected, the LCS option disappears. It shows under the default weather style when selected.

 

[alfredwayne]

Posting for posterity if anyone else is looking for the solution:

From the Content Manager preview, move the camera inside the car and click the windscreen banner decal, toggle transparent to YES & save.

Funny you should mention that pack and window issues. For as long as I've had them, the interior windows for the Falcon are all pixelated. Tried doing things like you posted (dirt FX off, hiding layers, transparency toggled), before and just again now, but can't seem to hide the layer obscuring the windows (different issue and car than you were facing). Just the Falcon too. Maybe someone has a fix for this issue? If you zoom in on the photos you can see the pixelation pattern.

 

[chas1723]

I made some camtool cams for Fenryr's version of Red Bull Ring.

https://www.patreon.com/posts/camtool-cams-for-107363242

 

[axydraul]

I would like to see Tokyo expressway in ac. I know existed shuto but I would love to see another track in the Tokyo highway. View attachment 1369476

This one? https://www.assettoworld.com/track/tokyo-r246

 

[X90]

Had a chance to try the new Pure LCS tonight and for those with a similar use case to mine, I'd recommend sticking to Gamma for now (latest version is fine).





EDIT: I am an idiot, and didn't read the first page of the Pure Config app. FidelityFX CAS is incompatible with Linear Color Space. Disabling it, either through CSP settings or the Pure Config page, will fix the washed-out image.

Cheers to Peter for calling me out.

 

[Peter Boese]

Had a chance to try the new Pure LCS tonight and for those with a similar use case to mine, I'd recommend sticking to Gamma for now (latest version is fine).

I'm on an HDR10 panel (LG OLED) and LCS produces a very washed out image at the moment. I have all the HDR bells and whistles enabled in the DXGI panel of CSP, and enabled Pure LCS in WeatherFX. I think Peter mentioned somewhere above that only Pure and Pure Candy PPFs are currently supported with 0.4, but I tried both of those as well as AEGIS and PureHDR and pretty much everything looks unnaturally bright and strange. Going back to Pure Gamma in the Weather Controller fixed everything right up (with AEGIS or PureHDR) and had the proper HDR tone mapping again.

So I'm sticking with this version of Gamma for the immediate and medium-term future, and I'd recommend all others on true HDR10 panels do the same. Very interested to check in on LCS as time passes, but it looks like for my specific use case it's a no go for now.

No worries, I've read the documentation and understand its advantages, and further understand the annoying undertaking a Pure re-write for it is. Thanks again to Peter for this essential graphics mod.

One more note/question on this post - I've tried for a while to force Pure lighting on in online races, whether hosted by myself or in leagues or pubs. It always either defaults to an ancient version of Sol or nothing at all. Is the controller for Pure server side, and if so, how can I enable it in AC Server Manager? Cheers to anyone who may know.

Something is not properly set then! It should look like in Pure Gamma! Could you make a screenshot in HDR with opened Pure Config app "PP" tab and activate the tonemapping curve debug:

This is the "pure" ppfilter in automatic HDR mode

Did you play with the photorealistic slider already?
You can also try to lower the Scene brightness in the Scene tab.

Dumb question... Where in CM is LCS located? I just went line by line and cannot see it. Running 0.2.3. I saw it before, but my eyes cannot see it now!

Edit: Because I had the Pure LCS under weather style selected, the LCS option disappears. It shows under the default weather style when selected.

With the new Pure 1.40 you don't have an option to set LCS. Pure Gamma 1.0 only uses the Gamma shaders and Pure LCS 0.4 only uses the LCS shaders. Both weather styles set the needed CSP shaders automatically in the background.

 

[X90]

Something is not properly set then! It should look like in Pure Gamma! Could you make a screenshot in HDR with opened Pure Config app "PP" tab and activate the tonemapping curve debug:

This is the "pure" ppfilter in automatic HDR mode
View attachment 1369554
Did you play with the photorealistic slider already?

I was fairly thorough, but I'll have a look and get back to you.

Something is not properly set then! It should look like in Pure Gamma! Could you make a screenshot in HDR with opened Pure Config app "PP" tab and activate the tonemapping curve debug:

This is the "pure" ppfilter in automatic HDR mode
View attachment 1369554
Did you play with the photorealistic slider already?
You can also try to lower the Scene brightness in the Scene tab.

And you are correct! I have besmirched your good name!


In my initial rush to go to the PP filter settings and sliders that you mentioned in your previous post, I merely skimmed the first page of Pure Config. If I had read it fully like I just did, I would have discovered that it says that FidelityFX CAS (which I use a bit of to clean up my image) is incompatible with LCS.

I've disabled it, and everything seems to work now - the differences are far more subtle between LCS and Gamma. I'll play around with the sliders to try and achieve a photorealistic image. At the moment, my debug graph does indeed look much like yours.

Sorry for the trouble! I've edited my first post to state my error.