Assetto Corsa PC Mods General DiscussionPC

[Juppek]

Hello guys I got a question... I got that F1 2002 mod but there is something bad about the tyres, they're supposed to be grooved tyres but the grooves look like they have been painted on the car and it seems like they are even slicks for a moment, is there a way to fix that model mistake for the SD 2002 cars.

I already thought taking tyres from 2001 or 2003 would work but after changing and saving the sets, the tyres looked the same.
Or is there an even easier way for this?

 

[MS6Driver]

Resources by Martinez_4313

www.overtake.gg

i hope he will update my changes soon :-)

 

[Quark67]

Very interesting, thank you!
And what values should be in surface.ini for an invisible collidable wall?

I just tried it, the car doesn't bump as much anymore, but the invisible obstacle is still there.

But this is progress for me anyway, thank you.

Perhaps there is another invisible collidable wall meshes. Which is the track you are modding?

 

[OooAhh Cantona]

Track Release: 1937 Tripoli v.90
by Historic Sim Studios & Sergio Loro
Free to the public

https://www.patreon.com/posts/121599559

 

[StoffelWaffle]

Track Release: 1937 Tripoli v.90
by Historic Sim Studios & Sergio Loro

https://www.patreon.com/posts/121599559

View attachment 1426739

I have not tested it yet. Hopefully it's good!

Hope it looks better than their other tracks, especially Tours and its rfactor looking ass scenery...

 

[Fanapryde]

Track Release: 1937 Tripoli v.90
by Historic Sim Studios & Sergio Loro

https://www.patreon.com/posts/121599559

View attachment 1426739

I have not tested it yet. Hopefully it's good!

Well, it doesn't need much to be better than the original

 

[OooAhh Cantona]

Hope it looks better than their other tracks, especially Tours and its rfactor looking ass scenery...

Was Tours released to the public? I don't recall seeing it. Or is it still in early access/patreon purgatory?

 

[Mike173]

Hi gents,
About the STC Audi A4 here is what i do after downloaded her at ACTK (dont know if its the last version)
In CMshowroom adjust these settings:
caster: 6.6~
KPI: 13.xx~ (was at 0, not good)

in car.ini: test those values, they are good enough imo
[CONTROLS]
FFMULT=1.614
STEER_ASSIST=1.000
STEER_LOCK=480
STEER_RATIO=16
LINEAR_STEER_ROD_RATIO=0.0033

In Game, adjust front TOE to -10~ and rear TOE to +10~, drive like a charm except the gear ratio too close in 2/3/4
for the gearbox, have a look there:

Audi 01E 6 Speed Dog Kits

Upgrade your Audi 01E gearbox with a 6 speed kit suited for circuit and rally racing. A variety of gear ratios are available to better suit your needs. This kit utilizes the OEM final drive. The installation of this kit requires modification to the transmission and the input shaft is a 26 spline...

drivesport.myshopify.com

PS: this car have also a problem with the 'rod_length' parameter (both front and rear) which also conditions the TOE and camber parameters

 

[FrustratedUse]

Okay it's getting to much to keep track of at this point, Can someone lmk when the F302 Audi A4 Super Touring Definitive Edition remasterd remake volume 5 is completed?

 

[caanglin]

Okay it's getting to much to keep track of at this point, Can someone lmk when the F302 Audi A4 Super Touring Definitive Edition remasterd remake volume 5 is completed?

I was thinking about waiting for the Super Power Ninja Turbo Neo Ultra Hyper Mega Multi Alpha Meta Extra Uber Prefix Combo Edition.

 

[Mike173]

So rather than trying to help, you can just throw it in the trash.☹️

 

[LaChub]

Perhaps there is another invisible collidable wall meshes. Which is the track you are modding?

Malaysia

Based on the original Malaysia for rFactor by Cico76 Credits Original creators: *cico76/Kicker/Alain Fry * - modeling, texturing, scene Kicker/Alain Fry - former modeling, organisation Kicker/Alain Fry - textures

www.overtake.gg

I want hide 1WALL7_3_SUB1

 

[Perico Lospa]

... Can someone lmk when the F302 Audi A4 Super Touring Definitive Edition remasterd remake volume 5 is completed?

 

[noroardanto]

Hi gents,
About the STC Audi A4 here is what i do after downloaded her at ACTK (dont know if its the last version)
In CMshowroom adjust these settings:
caster: 6.6~
KPI: 13.xx~ (was at 0, not good)

in car.ini: test those values, they are good enough imo
[CONTROLS]
FFMULT=1.614
STEER_ASSIST=1.000
STEER_LOCK=480
STEER_RATIO=16
LINEAR_STEER_ROD_RATIO=0.0033

In Game, adjust front TOE to -10~ and rear TOE to +10~, drive like a charm except the gear ratio too close in 2/3/4
for the gearbox, have a look there:

Audi 01E 6 Speed Dog Kits

Upgrade your Audi 01E gearbox with a 6 speed kit suited for circuit and rally racing. A variety of gear ratios are available to better suit your needs. This kit utilizes the OEM final drive. The installation of this kit requires modification to the transmission and the input shaft is a 26 spline...

drivesport.myshopify.com

PS: this car have also a problem with the 'rod_length' parameter (both front and rear) which also conditions the TOE and camber parameters

Please can you let me know how to make the caster and KPI adjustable? My CM is 0.2.6

 

[Masscot]

So rather than trying to help, you can just throw it in the trash.☹️

Yeah, seems like people are getting annoyed and impatient because a few of us are trying to make a really nice car even better. Not sure what to call that, but it's a really baffling attitude to have in a modding thread.
I guess in these attention-deficit days some people just want a steady stream of mediocre stuff that they'll drive once before moving onto the next one. Quantity, not quality.

 

[Jeroen V]

Okay it's getting to much to keep track of at this point, Can someone lmk when the F302 Audi A4 Super Touring Definitive Edition remasterd remake volume 5 is completed?

I just saw ACTK released v1.0.4 with following changes implemented. Is this the 'last' version we will see?

 

[marc magnela]

View attachment 1426862

ACTK must not have seen your message because he has just published a new version announced on his telegram.

 

[kpcart]

Track Release: 1937 Tripoli v.90
by Historic Sim Studios & Sergio Loro

https://www.patreon.com/posts/121599559

View attachment 1426739

I have not tested it yet. Hopefully it's good!

Waste of money going by their other mods. Sergio Loro's work updated, so why charge?

#edit, this one is free# so worth a try

 

[Masscot]

I just saw ACTK released v1.0.4 with following changes implemented. Is this the 'last' version we will see?

View attachment 1426888

Are you on dial-up internet or something?
How can anyone say for sure whether some other improvement might be added?
Is any mod ever 'final'..?

 

[Den_88]

ACTK must not have seen your message because he has just published a new version announced on his telegram.

Sometimes when I follow mod updates, many things surprise me.For example, these👉

it's obvious, isn't it, or am I wrong?I have been observing these "protrusions" of the insides since the very first release.I see the same thing with the extension file.👉

it seems that those who do this don't really understand it

 

[StoffelWaffle]

Bet my hands those protrusions are KW Studio's doing, seen so many things like these with isiMotor / isiMotor2 cars lol

 

[Mike173]

Hi gents, how to modify KPI and caster:

keep in mind the front caster is always negative (except on supermarket trolleys)
just play with the '2' point of the upper WB or/and the '2' point of the lower WB to set the CASTER. -6/-7 is an average value.
Points 1 and 3 of the upper WB have a lower position than the point 2, while points 1 and 3 of the lower WB have a upper position than the point 2, upper WB is always shorter than the Lower WB, all that combined with a good KPI makes the wheel when charged keeps a greater negative CAMBER

to set the KPI (in this case with DWB) just play with the '2' points of the upper and lower WB. Always to keep a negative CAMBER, the KPI must be positive. 13 is an average value.
Have fun, Mike

 

[marc magnela]

Sometimes when I follow mod updates, many things surprise me.For example, these👉View attachment 1426892
it's obvious, isn't it, or am I wrong?I have been observing these "protrusions" of the insides since the very first release.I see the same thing with the extension file.👉

I've just tried the original mod, there's the same problem and nobody's seen it.

 

[Fanapryde]

Waste of money going by their other mods. Sergio Loro's work updated, so why charge?

#edit, this one is free# so worth a try

Just gave it a run. Not 'perfect' but WAAAY better than the old version. Worth installing.

 

[nicktanjw]

Anyone knows what happened to Lore's Vintage Emporium? His Patreon is empty for some reason.

Wanted to download some of his mods.

 

[Perico Lospa]

... Is any mod ever 'final'..?

That is as true as none of us can escape death or taxes...

For my part, I apologize if at any time seemed that I was complaining about the development of the mod, that was not the intention... It's just that some of us are like spoiled, impatient children... 😅

 

[shi]

Nurburgring 1984 - 1985 v1.1

https://www.patreon.com/posts/nurburgring-1984-121175768

View attachment 1425271
Old layout of Nurburgring, Germany.
Conversion from F1 Challenge.

-CSP recommended
-2 layouts (Yearly billboards and building variations)
-36 pit/start
-AI, cam

Credits & Thanks;
F1 Challenge Track by dmarques
(VB and CMT's version with ugrades and optimizations to buildings and surroundings)

Terms Of Use (F1C);
Enjoy this mod to the fullest, that's all. If you want to convert or use this
as a base to create other cars, you're welcome in doing so as long as the
appropriate credit is given to the respective authors of the files you are
using. You can find all authors in this file

AC converted by @shi (shin956)
logo.png by @Fanapryde
Crowds texture by @Kniker97
background and some textures by kunos

Enjoy.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;
Fixed a problem with the lights on the home straight.

v1.02 changelog;
Fixed missing physical grassy areas and walls. (Thanks StoffelWaffle for the report.)

v1.1 changelog;
Fixed window transparency.
Fixed grass mapping in ext_config.
Imported tree textures from 1995.
Fixed objects flickering.
Some minor fixes.
- Thanks Mascot and M1GHTYM4VS for the report.

Nurburgring 1984 - 1985 v1.1
The link is in the quote.

v1.1 changelog;
Fixed window transparency.
Fixed grass mapping in ext_config.
Imported tree textures from 1995.
Fixed objects flickering.
Some minor fixes.
- Thanks Mascot and M1GHTYM4VS for the report.

 

[Masscot]

That is as true as none of us can escape death or taxes...

For my part, I apologize if at any time seemed that I was complaining about the development of the mod, that was not the intention... It's just that some of us are like spoiled, impatient children... 😅

Well, good things come to he who waits.
The danger with acting impatient and entitled (even in jest and especially with free mods) is that the modder might feel underappreciated, which might make them think twice about bothering next time, or at the very least keeping updates private so as not to attract negative attention. I've seen it happen plenty of times.

 

[Alguecool]

Yeah, seems like people are getting annoyed and impatient because a few of us are trying to make a really nice car even better. Not sure what to call that, but it's a really baffling attitude to have in a modding thread.
I guess in these attention-deficit days some people just want a steady stream of mediocre stuff that they'll drive once before moving onto the next one. Quantity, not quality.

If the few of us would also have time for just a few laps with the brand new physics data I gently proposed for MY Fairlady asking for feedback, for which NO ONE HERE answered, That would be great.

What, vexed ? Me ? Nooo

 

[Vintagedriver]

I see a lot of presettings from the CM Video, neckFX and CSP. Just a matter of click on that file and you get redirected to the CM website and the presetting will be installed or saved.
Like to know is how to publish my CM presets, so others can easily test my CSP/Video settings.

note: clicking “share” does nothing.