Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 155,303 comments
  • 49,234,481 views
No plan to fix some textures used for multiple adverts and objects resulting in distorted visuals ? I tried to make a 1998 skin for it (because why the hell not) but geez...

View attachment 1457044
View attachment 1457045
View attachment 1457046
View attachment 1457047
If you want to do a decent skin, you can't simply replace the textures of the skin. You have to assign different textures to each mesh via ext_config.ini.
For example on the DrPepper bridge you can assign a texture to the meshes of the side columns (sign895_roada352401_001_001...) and another one to horizontal billboard meshes (sign891_roada352401_001_001...)

[SHADER_REPLACEMENT_...]
MESHES= sign895_roada352401_001_001...
RESOURCE_0= txDiffuse
RESOURCE_FILE_0= side.dds

[SHADER_REPLACEMENT_...]
MESHES= sign891_roada352401_001_001...
RESOURCE_0= txDiffuse
RESOURCE_FILE_0= billboard.dds
 
Yes you can. Just export that mesh and use what you need in the extension.kn5 and hide the original in the skin ext_config.
I did this to the RSS 550 without touching the original model kn5.
View attachment 1364667
Are there any plans on releasing this? or is this one of those things that will never see the light out day outside your harddrive & friends? Not meant to sound rude, Just asking cause i really want the front bumper option :lol:
 

Divers Trees 3d Pack For Tree Planter v1.0 here :​

https://www.gtplanet.net/forum/downloads/divers-trees-3d-pack-for-tree-planter.7147/


acacia.jpg


bamboo.jpg


beech.jpg


birch.jpg


crownbeard.jpg


curly_palm.jpg


daisy.jpg


elm.jpg


fir.jpg


juniper.jpg


maple.jpg


oak.jpg


pine.jpg


spruce.jpg


willow.jpg


wind_swept.jpg
 
help TRR Hypercar :Has anyone managed to activate the automatic transmission on this series? for example ferrari 499
Unpack car data with content manager -> Open data folder -> Open drivetrain.ini -> replace the [Auto Shifter] part with something like this:

[AUTO_SHIFTER]
UP=7850 ;gear change up
DOWN=6000 ; gear change down
SLIP_THRESHOLD=1 ;
GAS_CUTOFF_TIME=0.05

If it still doesn't work, lower the "UP" Rev, if it works but then on 2-3-4 gear it doesn't change again, lower the "DOWN" Rev

After that, Save the file -> Delete data.acd -> Pack the data using content manager and it should work.
 
More Work on the Reynard 01Q and 2kQ models (Work on the rear wings and front dive planes to make it as close to real life as possible for me)

Separate the rear wing into multiple objects and fuse them back together

Changelog

-Update front Diveplanes on all models, previous front diveplanes were too long forward
-Lowered the rear wing for the 2KQ Mopar and 2KQ Judd Lemans
-Lowered the rear wing for the 2003 Nasamax Reynard 01Q Lemans Aero Package
-Thicker and higher rear wing for the 2000 Renyard 2kQ ALMS Judd
-Higher rear wing for the 2003 Nasamax Reynard 01Q ALMS Aero Package
-More accurate rear wing placement for all models



Before
View attachment 1456670

After (updates)
View attachment 1456677

Before
View attachment 1456671

After(updates)
View attachment 1456678

Before
View attachment 1456674

After(updates)
View attachment 1456679

Before
View attachment 1456675

After(updates)
View attachment 1456680

Before
View attachment 1456672

After(updates)
View attachment 1456681

Before
View attachment 1456673

After(updates)
View attachment 1456682

Before
View attachment 1456684

After(updates)
View attachment 1456683
More Updates to the Pack

Changelog

-Update to Reynard 01Q Judd Models, update front splitter, front dive plane, and rear wing
-Adding Noel Del Bello Reynard 2 KQ-Lehmann LMP675 and LMP900 cars
-Updated Aero for 01Q Judd Models and 2KQ Lehman LMP675 and LMP900
-Updated drivetrain for the 2KQ Lehmann LMP675 and LMP900

To do

-Update front tyres to the color blue for the 2KQ-Lehmann cars

preview.jpg


preview.jpg


preview.jpg


preview.jpg


preview.jpg
 
Maybe I'll do more skins, but may I ask why ?
Its the way these cars are made/mapped. I noticed that the window trim is all painted on as that is how it is (alot are like this especially older mods) and for me i just couldnt get it looking good enough. Other things which annoyed me were the headlights being flipped so 1 logo is always upside down and then probably the biggest issue for me is whenever you give this an AO the moulding changes on the front wing and moves and to me it looks like hot garbage i have never seen this before its like 1 moulding is fuzzy and duoubled up on 1 side its really odd. The other issue is PM3DM version is available and its not like its utter garabge there are plus sides and down sides to each but i ended up chucking the f302 version in the bin and sticking with PM3DM version with the FSR interior.

overall the f302 version is a better model with better texturing e.t.c but its just a little rough around the edges that i care about.


Have a look at the pic below and see what i mean by the moulding on the front wing moving up with an AO and the moulding on the door looks wierd aswell

to me this raceroom model ain't all that

also i was only going to do skins from pm3dm version and i'm sat there going "these skins are already done on this car is it really worth my time messing around with f302 version when those things are niggling away at me with the model?" thats basically where my thoughts were.

thanks for the tempolate it is golden its just the car i aint keen on and its all stuff i cannot change


Screenshot (915).png
Screenshot (914).png
 
Last edited:
!!RELEASE!!

NPanic & Team WSC Legends are proud to release the "Montagne M2-10" (Alpine A210) for Assetto Corsa. This is the first ever high quality historic WSC Alpine to be represented properly in a modern sim! You can buy the car here: https://www.patreon.com/posts/monta...paign=postshare_creator&utm_content=join_link
And download the 40 historical liveries & Alpine branding pack here: https://www.overtake.gg/downloads/a...ing-patch-montagne-m2-10-by-nps-garage.77798/

View attachment 1456916
$11? will have to skip this one.
 
Vara Raceway v1.0

Screenshot_ks_audi_r8_plus_vara_raceway_13-5-125-18-58-23.jpg
Screenshot_ks_audi_r8_plus_vara_raceway_13-5-125-18-59-41.jpg

Fictional street circuit in Sweden.
Conversion from rFactor2.

-CSP recommended
-30 pit/start
-AI, cam

Credits & Thanks;
RACE07 Track by SimBin Studios
rFactor2 converted by Andrea1968
-Thank you for giving me permission (Andrea1968)

AC converted by @shi (shin956)
Sections file by @Fanapryde
RainFX config by @Quikslvr
Crowds texture by @Kniker97
some objects and textures by Kunos

Enjoy.
 
Lemans Hypercar has me hyped up for the weekend, everyone else watching? Those going, keep us updated and let us know how best to do it - planning to get there next year.
 
shi
Vara Raceway v1.0

View attachment 1457323View attachment 1457324
Fictional street circuit in Sweden.
Conversion from rFactor2.

-CSP recommended
-30 pit/start
-AI, cam

Credits & Thanks;
RACE07 Track by SimBin Studios
rFactor2 converted by Andrea1968
-Thank you for giving me permission (Andrea1968)

AC converted by @shi (shin956)
Sections file by @Fanapryde
RainFX config by @Quikslvr
Crowds texture by @Kniker97
some objects and textures by Kunos

Enjoy.

These rfactor2 tracks are very detailed, looking forward to more of them! Thanks for the conversions shin
 
Unpack car data with content manager -> Open data folder -> Open drivetrain.ini -> replace the [Auto Shifter] part with something like this:

[AUTO_SHIFTER]
UP=7850 ;gear change up
DOWN=6000 ; gear change down
SLIP_THRESHOLD=1 ;
GAS_CUTOFF_TIME=0.05

If it still doesn't work, lower the "UP" Rev, if it works but then on 2-3-4 gear it doesn't change again, lower the "DOWN" Rev

After that, Save the file -> Delete data.acd -> Pack the data using content manager and it should work.
thk,with fer 499, I found these parameters 7800 up down 5555, I had to raise the limiter in engine.iniin ills Metropark I went down to 1.09.141 but it's difficult to keep it in the curve
 
Hi, I have an issue of pink texture of car Peugeot 908 HDI 2011 from this free Le Mans 2011 pack ().



Any idea how to resolve it (I am not the only to face it)? Thanks, multi
 

Attachments

  • Assetto corsa2.jpg
    Assetto corsa2.jpg
    155.7 KB · Views: 16
  • Assetto corsa.jpg
    Assetto corsa.jpg
    102.6 KB · Views: 18
Last edited:
Hi, I have an issue of pink texture of car Peugeot 908 HDI 2011 from this free Le Mans 2011 pack ().



Any idea how to resolve it (I am not the only to face it)? Thanks, multi

Holy missing textures Batman

Easy fix would be to slap any carbon textures with 3Dsimed
 
Wondering if anyone can figure out what's new (or unreleased) on this picture?

(I'm thinking of releasing something and gauging a bit here if people find it interesting enough.)
Aight, thank you all for the guesses. 😛

It's the TV camera itself. 😊

20250611193004_1.jpg

Screenshot 2025-06-11 211154.jpg


Full Nordschleife is completed, modelled (most of the cams) on the N24 2024 event. It's not perfect (trees grown a lot!), but like 99% accurate. I've found that I can (not say "easily", but) do TV camera sets that model the real broadcasts more accurately than most AC track mods out there.

The above example is actually one of the least accurate cams in the set (that's because there's a tree interfering on the Kunos track where the 100% correct spot is, a little further up and back). But it's a historic camera spot, used since the 1970s, and quite rare -

...So it's a good example still, because I've also found A TON of archive youtube footage where the middle part of the track is also camera'd up trackside! (Instead of heli, as nowadays) That's from where the last trackside cam currently loses the cars at Aremberg exit all the way to where they pick them up again on the example above, the entry to the Karussell. All pro shot! (except a small part on Kesselchen and Mutkurve)

I'm thinking of releasing the Nordschleife layout (and the Tourist, cause it's almost the same) for free on RaceDepartment, and create a Patreon for the full package, as well as the other tracks I've done, or nearly completed. I feel like it's worth it for their unique level of accuracy. I'll post the RD link (not the paid link) closer to release.

Here are some more shots:

1 ks_nordschleife Flugplatz.jpg

This is the Flugplatz angle used until they graded the track after Mardenborough's crash in 2015, and it beautifully shows the cars getting light there. On the current, graded version, they don't do that anymore and the track, realising this, moved to a full head-on cam nowadays that focuses on the general steepness of the hill instead. (ks track is a 2014 scan, so it still has the jump, and I thought the old angle is more representative for this one!)

2 ks_nordschleife Foxhole.jpg

I've found this angle from the DTM 1993 race at the full Nurburgring; they had this dramatic camera angle for the Foxhole exit kerb ride. This shot gets more dramatic on replay, the heavier you throw the car in!

4 ks_nordschleife Pflanzgarten_1.jpg

This is the standard N24 2024 camera for the Pflanzgarten 1 jump, nothing to comment here - besides the accuracy! :P About 80% of all cams are from the N24 2024/2023 event. Full list of events & year for each camera # will be in the Readme.txt file.

5 ks_nordschleife Tiergarten.jpg

Finally, this Tiergarten angle is from WTCC's 2016 race on the full Nurburgring - it's a bit lower than the angle they use nowadays, and so the small increase in drop towards the very end of the downhill, just before the compression, is more pronounced. The current higher cams hit the entire drop from the same angle, so the increase in steepness is less noticeable.
 
Last edited:
Aight, thank you all for the guesses. 😛

It's the TV camera itself. 😊

View attachment 1457439
View attachment 1457434

Full Nordschleife is completed, modelled (most of the cams) on the N24 2024 event. It's not perfect (trees grown a lot!), but like 99% accurate. I've found that I can (not say "easily", but) do TV camera sets that model the real broadcasts more accurately than most AC track mods out there.

The above example is actually one of the least accurate cams in the set (that's because there's a tree interfering on the Kunos track where the 100% correct spot is, a little further up and back). But it's a historic camera spot, used since the 1970s, and quite rare -

...So it's a good example still, because I've also found A TON of archive youtube footage where the middle part of the track is also camera'd up trackside! (Instead of heli, as nowadays) That's from where the last trackside cam currently loses the cars at Aremberg exit all the way to where they pick them up again on the example above, the entry to the Karussell. All pro shot! (except a small part on Kesselchen and Mutkurve)

I'm thinking of releasing the Nordschleife layout (and the Tourist, cause it's almost the same) for free on RaceDepartment, and create a Patreon for the full package, as well as the other tracks I've done, or nearly completed. I feel like it's worth it for their unique level of accuracy. I'll post the RD link (not the paid link) closer to release.

Here are some more shots:

View attachment 1457435
This is the Flugplatz angle used until they graded the track after Mardenborough's crash in 2015, and it beautifully shows the cars getting light there. On the current, graded version, they don't do that anymore and the track, realising this, moved to a full head-on cam nowadays that focuses on the general steepness of the hill instead. (ks track is a 2014 scan, so it still has the jump, and I thought the old angle is more representative for this one!)

View attachment 1457436
I've found this angle from the DTM 1993 race at the full Nurburgring; they had this dramatic camera angle for the Foxhole exit kerb ride. This shot gets more dramatic on replay, the heavier you throw the car in!

View attachment 1457437
This is the standard N24 2024 camera for the Pflanzgarten 1 jump, nothing to comment here - besides the accuracy! :P About 80% of all cams are from the N24 2024/2023 event. Full list of events & year for each camera # will be in the Readme.txt file.

View attachment 1457438
Finally, this Tiergarten angle is from WTCC's 2016 race on the full Nurburgring - it's a bit lower than the angle they use nowadays, and so the small increase in drop towards the very end of the downhill, just before the compression, is more pronounced. The current higher cams hit the entire drop from the same angle, so the increase in steepness is less noticeable.
I NEED IT NOW!!
 
Azure Circuit 2019(Monaco) launched.
Because there is already a mod called monaco_2019, so it is named as azure_2019(region of France near Monaco).
View attachment 1356913
View attachment 1356914

View attachment 1356915
View attachment 1356917
View attachment 1356918
View attachment 1356919
View attachment 1356920
LINK:https://mega.nz/folder/z8Il0KCK#sWqQ4VdeEDJGOVOJmhyJ8w
Aruze Circuit 2019 updated to V2
Texture, mesh, tree and ai are all updated, let it may be the most beautiful monaco in AC.
Screenshot_reiza_formula_extreme_azure_2019_9-5-125-23-20-28.png

Screenshot_l26_a110_2017_azure_2019_v2_14-5-125-14-23-40.jpg

Screenshot_l26_a110_2017_azure_2019_v2_14-5-125-14-26-6.jpg

Screenshot_l26_a110_2017_azure_2019_v2_14-5-125-14-26-19.jpg

Flie:Azure_2019_v2
Download link:https://mega.nz/folder/z8Il0KCK#sWqQ4VdeEDJGOVOJmhyJ8w
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back