Assetto Corsa PC Mods General DiscussionPC

[racinjoe013]

I was watching a GT race at Monza from 2013 looking for sponsors back then and thought this was interesting. The wall setup leading into the first chicane looks like it does in 2025 for the most part. There are a couple of sections way off in the distance that are not the same.

So this leads me to a couple of questions.

1.) Are these walls temporary and only used for races or are they permanent? If permanent, when did they change them from how Kunos made the track look? Obviously they were there in 2013.

2.) What year is the Kunos version based on? I always thought it was 2013 (since that was roughly when the game was released), but it must be from before 2013 since they didn't make the track look like this.

 

[Jeroen V]

This must have been asked for and also answered on a couple of times before I guess, but cannot find it here (this quickly), Apologies for asking again. Is there a simple way in renaming cars such that they do show in CM with (for instance) "LMDh - Ferrari 499P" instead of only 499P? Same goes for "GT3" followed by actual car name in CM, etc. Would make searching in CM a lot more easy for me when setting up a race. Thanks in advance and have the best of day.

 

[Fall Guy]

This must have been asked for and also answered on a couple of times before I guess, but cannot find it here (this quickly), Apologies for asking again. Is there a simple way in renaming cars such that they do show in CM with (for instance) "LMDh - Ferrari 499P" instead of only 499P? Same goes for "GT3" followed by actual car name in CM, etc. Would make searching in CM a lot more easy for me when setting up a race. Thanks in advance and have the best of day.

Sorry maybe I don´t understand your question but you just rename the cars here?

 

[peppemuratore]

@Young78

EDIT: Solved with 7zip 😀

Hi, [...] thanks for your wonderful mods!

What is the difference between the two versions of F50GT?

 

[CrisT86]

I was watching a GT race at Monza from 2013 looking for sponsors back then and thought this was interesting. The wall setup leading into the first chicane looks like it does in 2025 for the most part. There are a couple of sections way off in the distance that are not the same.

View attachment 1509909


So this leads me to a couple of questions.

1.) Are these walls temporary and only used for races or are they permanent? If permanent, when did they change them from how Kunos made the track look? Obviously they were there in 2013.

2.) What year is the Kunos version based on? I always thought it was 2013 (since that was roughly when the game was released), but it must be from before 2013 since they didn't make the track look like this.

1.) These are permanent walls. Added in 2012.
2.) KS Monza is based on the 2011 version

 

[Vintagedriver]

Hi, you've never seen this message before: what does it mean?😅

Think it’s Italian, the translation seems to be:

Indice oltre i limiti della matrice. = index beyond matrix limits.

Somewhere in CM there is an language adjustment to change it to English so you do not have to translate it.

😅😂🤣


Now Seriously, I can not help you but now the translation is published, a member maybe can help you further. Remember this is an English forum as most members can not read this beautiful Italian language.

 

[andrevr]

Hi, you've never seen this message before: what does it mean?😅

In English in programming parlance, "Index out of bounds"
Objects in an array (competitor cars in a race, for example ) might be numbered (indexed) in a group (array).
The error refers to "I have an object claiming to be #11 in array(1..9)"

That said, the error gives us no clue as to the specifics, so a general explainer is all I have ¯\(ツ)/¯

 

[StoffelWaffle]

This must have been asked for and also answered on a couple of times before I guess, but cannot find it here (this quickly), Apologies for asking again. Is there a simple way in renaming cars such that they do show in CM with (for instance) "LMDh - Ferrari 499P" instead of only 499P? Same goes for "GT3" followed by actual car name in CM, etc. Would make searching in CM a lot more easy for me when setting up a race. Thanks in advance and have the best of day.

Just copy and paste the category name each time and save ? It's not that tedious lol

 

[Fall Guy]

Just copy and paste the category name each time and save ? It's not that tedious lol

@Jeroen V I would rather recommend to use tags, like "GT3" for all your GT3 cars and then just search in CM with the correct string.

 

[24H]

anyone knows if there´s a way to set tags for multiple cars at the same time?

 

[Jeroen V]

@Jeroen V I would rather recommend to use tags, like "GT3" for all your GT3 cars and then just search in CM with the correct string.
View attachment 1509938

Thanks. Will test some options. Yours does seem my prefered method.

Also:

 

[Gabriele]

Think it’s Italian, the translation seems to be:

Indice oltre i limiti della matrice. = index beyond matrix limits.

Somewhere in CM there is an language adjustment to change it to English so you do not have to translate it.

😅😂🤣


Now Seriously, I can not help you but now the translation is published, a member maybe can help you further. Remember this is an English forum as most members can not read this beautiful Italian language.

You're right, sorry. I didn't think to change the language before publishing. Thanks for the reply.

In English in programming parlance, "Index out of bounds"
Objects in an array (competitor cars in a race, for example ) might be numbered (indexed) in a group (array).
The error refers to "I have an object claiming to be #11 in array(1..9)"

That said, the error gives us no clue as to the specifics, so a general explainer is all I have ¯\(ツ)/¯

I restarted CM and the error seems to be gone. Thanks a lot.

 

[leBluem]

anyone knows if there´s a way to set tags for multiple cars at the same time?

you need MS Excel, this tool can do can do it then (update with "how to")

edit: adding a tag in CM is quite easy too: Ctrl+Click to select multiple cars, then at the bottom, select "UI" > "Add Tag":

 

[MARKDENNY]

Just had this pop up on loading game this am (found 1 update for mods OULTON PARK (6) any ideas what it is about what the update is ?

Regards

Mark

 

[leBluem]

rt Oulton Park v1.8
-smoothed road

DL on google drive or on mediafire or via CUP in ContentManager

 

[Bob Jackson]

Doran JE4 1.1 should be this one

Ford Doran JE4 | Assetto World

Download, install and enjoy this Ford Doran JE4 Assetto Corsa mod instantly for free. ford_doran_je4

www.assettoworld.com

Release of the CSP preview settings 01-2026

Preset: https://acstuff.club/s/loda
Showroom: https://www.mediafire.com/file/ot02bbw1z0dsitu/tav_moderna.7z/file

Please do a backup if you already have the TAV Moderna showroom
Extract to your assetto corsa showroom folder: Steam\steamapps\common\assettocorsa\content\showroom

View attachment 1509849View attachment 1509850View attachment 1509851View attachment 1509852

whats wrong with mine? and what pp filter did you use?

when i look inside the showroom folder your is build like a track structure, all others have only 2 or 3 files

 

[asennamm]

whats wrong with mine? and what pp filter did you use?

I get the same result...

 

[Fall Guy]

Hillman Imp - refracting headlights

Create a new folder "extension" and put the file into it, remove the .txt.

Mod from Bazza / Dr. Doomslab

 

[Timeway Shark]

Luca959, if you see this message, please reply. I would like to reply to the direct message you sent me, but I am unable to do so due to an error in gtplanet.

 

[fleskebacon]

@_Bazza_
think there is a little mistake on the shadow of the Porsche 911 - SWB
View attachment 1505802View attachment 1505803

Any fix for this yet? Lovely car.

 

[Luca959]

Luca959, if you see this message, please reply. I would like to reply to the direct message you sent me, but I am unable to do so due to an error in gtplanet.

Hi, do you have a download to replace the original Ford Doran collider with yours? I'm not very familiar with replacing files.
Thank you for your kind reply

 

[Timeway Shark]

I was unable to reply due to an error on gtplanet, so we will respond from here.

I recommend making a backup in case it doesn't turn out the way you want it to.

This is my car's collider.
It may not work with your version of the car as it is compatible with other modifications. please note.
I'm not sure if my explanation is sufficient, but all you have to do is put this collider in the "data" folder of the relevant car.

Go to the Content tab in Content Manager.

Find Doran JE4 in Content Manager.

Click on "Folder (located next to Reload)" displayed under the car.

Drag and drop the downloaded "collider.ini" into the "data" folder in the displayed folder and replace it.

Alternatively, you can change the collider of your car directly without downloading.
I simply made the height of the collider thinner than the original (it doesn't matter how many 0s you add lol).

Click on the "data" folder in the car folder to open it.

Find "collider.ini" and click to open it (select an app to open it in, such as Notepad).

Delete all the text in the ini file and copy and paste the following string.

[HEADER]
COLLIDERS=1

[COLLIDER_0]
CENTRE=0 ,-0.27 ,0.40
SIZE=1.2 ,0.00000001 ,4.20
GROUND_ENABLE=1

Save your changes and close.

 

[andrevr]

Doran JE4 1.1 should be this one

Ford Doran JE4 | Assetto World

Download, install and enjoy this Ford Doran JE4 Assetto Corsa mod instantly for free. ford_doran_je4

www.assettoworld.com

Release of the CSP preview settings 01-2026

Preset: https://acstuff.club/s/loda
Showroom: https://www.mediafire.com/file/ot02bbw1z0dsitu/tav_moderna.7z/file

Please do a backup if you already have the TAV Moderna showroom
Extract to your assetto corsa showroom folder: Steam\steamapps\common\assettocorsa\content\showroom

View attachment 1509849View attachment 1509850View attachment 1509851View attachment 1509852

Thanks for sharing. These look great. The clear seperation of background and floor, but with much less texture than the previous release.
Yes please.

@Bob Jackson Just go ahead and generate the preview, sir. The finished render doesn't look like that.

 

[leBluem]

Azure Coast + Cote d'Azure v1.1
-fixed grass part near highway/train crossing
mediafire or google drive

GT Sainte Croix v1.3
-fixed detail textures for electric poles
-fixed some vehicle shadow issues (via CSP config only)
-made some white lines in corners smoother
-updated crowd textures
-updated 2 pine tree textures
-more detailed/colorfull/shiny vehicle textures
-shinier water
-added some crew stuff in pits
-added more groove in pits
-added timing tower, showing top 12 of leader board
mediafire or google drive

or via CM in the next couple days

 

[Alx Hill]

whats wrong with mine? and what pp filter did you use?

when i look inside the showroom folder your is build like a track structure, all others have only 2 or 3 files

I get the same result...

Settings/ Content Manager/ Custom Showroom & uncheck the box "Use CSP for final previews render".

Doran JE4 1.1 should be this one

Ford Doran JE4 | Assetto World

Download, install and enjoy this Ford Doran JE4 Assetto Corsa mod instantly for free. ford_doran_je4

www.assettoworld.com

Release of the CSP preview settings 01-2026

Preset: https://acstuff.club/s/loda
Showroom: https://www.mediafire.com/file/ot02bbw1z0dsitu/tav_moderna.7z/file

Please do a backup if you already have the TAV Moderna showroom
Extract to your assetto corsa showroom folder: Steam\steamapps\common\assettocorsa\content\showroom

View attachment 1509849View attachment 1509850View attachment 1509851View attachment 1509852

Beautiful previews & works as intended, no problems on my side!
Thanks for sharing!
Is it possible to have this in a dark theme (background)? Since you were working on this it might be easy for you.

 

[Bob Jackson]

Thanks for sharing. These look great. The clear seperation of background and floor, but with much less texture than the previous release.
Yes please.

@Bob Jackson Just go ahead and generate the preview, sir. The finished render doesn't look like that.

yes they did, but now i have checked the use csp for final previews render and now its very good looking

 

[Rodger Davies]

Any fix for this yet? Lovely car.

Thought it was in the 1.3.1 patch - do you have that? If missed then will make sure it's in the next one.

 

[protoss]

Any thoughts on this thread that appeared in Assetto's subreddit? From how they're describing it, it's a major security flaw in CSP.

Link:

 

[fleskebacon]

Thought it was in the 1.3.1 patch - do you have that? If missed then will make sure it's in the next one.

I have the 1.3.1 patch, still the same. Isn't mentioned in the changelog either.

 

[Bob Jackson]

Settings/ Content Manager/ Custom Showroom & uncheck the box "Use CSP for final previews render".


Beautiful previews & works as intended, no problems on my side!
Thanks for sharing!
Is it possible to have this in a dark theme (background)? Since you were working on this it might be easy for you.

what csp version do u use? i have alot of errors on the latest one and when i use the recomended one the car in the preview is very smal and nothing like the pictures showed above