Assetto Corsa PC Mods General DiscussionPC

[Stupornaut]

maybe u fix/change the assettocorsa root folder inside cm

Nope, that's not it. I was able to view folders through CM earlier today, and then, without changing anything I could notice, it just stopped working. It actually shows the folder in its actual location before the window closes again, so I don't know if it's a filepath issue. I do know it started happening in tandem with a memory error I forgot to write down, and I can still do most other things in CM (launching a race, renaming/tagging cars and tracks, etc.), it's just this one thing that's bugged out.

EDIT: things seem to be working again after a reboot so I'll keep an eye open for anything specific that happens to cause this error again.

 

[SpeedStar2000]

Surprised the VRC A4 is FWD, though I guess maybe the quattro version didn't race that long....

Also since thats the final one I guess that means the full Supertourer grid will be the VRC + pm3dm Nissan/Volvo, which are not that hard to BoP....

the Quattro only raced in 1996 and 1997 only (in BTCC) and the rest of the season was the A4 only.

so VRC from the file is 1998 so it's the regular A4 and not the Quattro.

edit: @JK1977 did the Quattro same as Cyril. This is the first regular A4 FWD for the Supertouring cars in AC.

 

[sml44]

Is it possible to make the new Tourer VRC compatible with older versions of CSP? I know a non-CSP version is included, but my non-CSP versions don't perform well on the track.

What I'm trying to ask here is what can be disabled in newer cars to make them work with CSP 0.2.8, like the Gojia (CSP version), for example.

 

[Nuttyboy812]

Not having the cool headlights on the FSR/iHT Acura bothered me. It's "for" the FSR one but all you need to do is rename the kn5 to match the iHT one and it works. If you want it as an extension only, I'm working on that so I can upload it to Overtake, I just wanted to get this working at the very least, consider it a beta. [Link]

 

[andrevr]

Were to find that new kn5 loader? Did use the search but it did not find any in CM menu.
Btw I’m using the 2.12

It was in General. Might have been absorbed to be on by default, in a later version?

PS. Still there in 0.2.11

 

[Jezza819]

New at VRC:
View attachment 1511431

That BMW is very easy to spin. At least for me it is.

 

[RacingManiac]

Pretty exciting to drive actually, but so far I am like 2 sec faster in the Audi than the BMW around Donington Park....

 

[Carpocalypse]

are you using 0.2.7 or 0.2.7p1? because 0.2.7p1 is not 0.2.7 public.

I don't know, I've upgraded to 0.2.11, if P1 is the optional paid upgrade that enables rainFX, then yes, I was running 0.2.7p1.

On a sidenote, has anyone else encountered problems with the CSP physics on the RSS Formula Alpine 2025? Namely, the AI refusing to leave the pits? I had to switch to the non-CSP physics to fix it. I've emailed RSS about it.

 

[andrevr]

Caterham 7 Superlight R500 Public Release!!
Download: https://www.patreon.com/posts/caterham-7-r500-130032801
Converted From FH5
-AO inside and out
-Realistic Dashboard
-Physics
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal


View attachment 1511445View attachment 1511446View attachment 1511447View attachment 1511448View attachment 1511449View attachment 1511450View attachment 1511451

This car is SO much fun. Thank you, Peter

 

[fto_10]

Nope, that's not it. I was able to view folders through CM earlier today, and then, without changing anything I could notice, it just stopped working. It actually shows the folder in its actual location before the window closes again, so I don't know if it's a filepath issue. I do know it started happening in tandem with a memory error I forgot to write down, and I can still do most other things in CM (launching a race, renaming/tagging cars and tracks, etc.), it's just this one thing that's bugged out.

EDIT: things seem to be working again after a reboot so I'll keep an eye open for anything specific that happens to cause this error again.

i think i have the same issue for long time now, it started as soon i upgrade my rtx card. it might has something to do with temporary memory , it started with not be able to open sometimes the folders, then open showrooms or notebooks ... once i restart the pc is all good again for a few days ... ai and a lot of searching online suggest that it might have something to do with 32 bits files instead of 64 in windows/system folders or with dll or d3d11 files , dont remember exactly ...if your issues get worst(showroom not opening ) look at this https://assettocorsamods.net/threads/can’t-start-custom-showroom-external-component-has-thrown-an-exception.3161/ ...i use the video with the https://www.dependencywalker.com/ it work for 2 months then i update the rtx and same issues came back . maybe it was just luck ... i share this just in case someone knows more and not as a fix you should follow, i also save a lot of the errors notifications i got if someone wants to have a look.

 

[Perico Lospa]

... has anyone else encountered problems with the CSP physics on the RSS Formula Alpine 2025? Namely, the AI refusing to leave the pits?...

Side note:

For better or worse, it's common to report problems with Assetto Corsa, and sometimes they only affect one or two persons, while the rest are unaffected. If it's a general problem that affects everyone, you know it will be resolved sooner or later, but those kinds of bugs that only affect few people are more frustrating...

When these problems are discussed, suspicion usually falls on a particular version or setting of CSP, CM, Windows, etc., but the affected person almost never mentions whether they have any side apps installed (AI related, mainly) that might be contributing to the malfunction. It would also be helpful to mention if we have any apps of this type installed; the more information provided, the more clues the forum experts will have to figure out what is causing the bugs... 🤔

(Thinking Out Loud Mode, Off).

 

[k_p]

Proper refraction headlights and turn signals with photoelastic shader for Aston Martin AMR1 (imsa_aston_amr1). For lighting to work you need to unpack data and replace lights.ini then repack or leave data folder and delete data.acd

 

[burk1336]

Hello, I am looking for cozy61's red bull ring 2022. the file name is called "11_austria_gp22". The gdrive is taken down so I cannot find it anywhere. Thanks in advance.

 

[Masscot]

Proper refraction headlights and turn signals with photoelastic shader for Aston Martin AMR1 (imsa_aston_amr1). For lighting to work you need to unpack data and replace lights.ini then repack or leave data folder and delete data.acdView attachment 1511808

Question for you (and @Fall Guy, and anyone else who's mastered refractive lights via config)... could refractive lights be added to VRC's super tourers? I love these cars but when chasing down a pack of them the rear lights of the cars in front look pretty awful by modern modding standards. Some rear lights on the super tourers are very flat and dull, and don't look much better than NASCAR fake-light decals. Refractive lights would be the icing on the cake for this otherwise wonderful pack.

 

[Fall Guy]

Proper refraction headlights and turn signals with photoelastic shader for Aston Martin AMR1 (imsa_aston_amr1). For lighting to work you need to unpack data and replace lights.ini then repack or leave data folder and delete data.acdView attachment 1511808

Nice one. Seems there is a new expert in our club, so feel welcome here.

 

[Carter_1975]

Hey guys need some help I'm getting weird artifacts on the rims with 3.0-preview212 ,I tried with 2.11 and the artifacts are gone.
First photo is CSP 3.0-preview212
View attachment 1509217View attachment 1509218

I'm not sure if this has been answered, but I had a similar issue, but it wasn't just on the rims - I read somewhere it might be something to do with these Extra FX settings:

Changing to Hi-Z (new) and increasing the number of steps seems to have reduced it somewhat on my setup. You can change it live to see if it improves the visuals. However, setting the steps too high had a negative affect on my FPS.

 

[Carter_1975]

On the subject of strange visuals, does anybody know what causes this effect on the hill going up to Eau Rouge/Radillon or how to fix it? This is Spa66, but it's also noticeable on some other tracks. The effect seems to vanish the closer I get to the uphill section.

 

[ancient_3]

On the subject of strange visuals, does anybody know what causes this effect on the hill going up to Eau Rouge/Radillon or how to fix it? This is Spa66, but it's also noticeable on some other tracks. The effect seems to vanish the closer I get to the uphill section.
View attachment 1511845

I had the same bug and solved it in some way by modifying the ext-config.ini, check this post :

PC Post in thread 'Assetto Corsa PC Mods General Discussion'

Oct 12, 2025

Hi friends,

I'm currently reviewing all tracks > 7km in my track list

While testing Spa66 from Reboot Team updated by racing joe013 1.06 , I found a mirroring effect seen at Raidillon from Eau Rouge that I do not like .

I was able to disable it by making a wild shader replacement with ksPerPixelMultiMap_NMDetail, that uses original values and part of the texture of the original shader (which is ksMultiLayer_fresnel_nm)

[SHADER_REPLACEMENT_...]
ACTIVE=1
DESCRIPTION= fixing mirror effect raidillon
MESHES=vis_1ROAD_1_001
MATERIALS= ROAD_TRACKMAIN01_WET
SHADER =...

• ancient_3

 

[k_p]

Nice one. Seems there is a new expert in our club, so feel welcome here.

Thanks, long time lurker. Modding for for several years but keep them private. IHMO refraction looks best when using selflighting or
LIGHT_EXTRA_ and separate mesh acting as bulb

Question for you (and @Fall Guy, and anyone else who's mastered refractive lights via config)... could refractive lights be added to VRC's super tourers? I love these cars but when chasing down a pack of them the rear lights of the cars in front look pretty awful by modern modding standards. Some rear lights on the super tourers are very flat and dull, and don't look much better than NASCAR fake-light decals. Refractive lights would be the icing on the cake for this otherwise wonderful pack.

I will look into it because there are things that need to be present in lights to have good refraction. I mean by that proper textures and separated meshes.

 

[RMi_wood]

On the subject of strange visuals, does anybody know what causes this effect on the hill going up to Eau Rouge/Radillon or how to fix it? This is Spa66, but it's also noticeable on some other tracks. The effect seems to vanish the closer I get to the uphill section.
View attachment 1511845

well... I thought I was going nuts but my Spa (converted from GTR2) has an issue nearly exactly like this.
It "appears" to be CSP related but I cant pin it down, but if I change the road shader to ksPerPixel it goes away.
This is the only place where it happens and nearly exactly from the same viewpoint as your screen.

It's really killing my progress in getting v2 to a release state. Any and all help wanted and needed.

 

[Quark67]

Same issue.
At far distance and with a low angle I can see the artifact.
It's seems like the textures of objects and terrain near the track blends with the track.
If I move towards the artifact, it moves further.

Here you can see the Shell billboard blending with the track (the posted image is zoomed).

Pherhaps it should be something related to CSP/Graphics/adjustments (I have extraFX disabled)

 

[ancient_3]

well... I thought I was going nuts but my Spa (converted from GTR2) has an issue nearly exactly like this.
It "appears" to be CSP related but I cant pin it down, but if I change the road shader to ksPerPixel it goes away.
This is the only place where it happens and nearly exactly from the same viewpoint as your screen.

It's really killing my progress in getting v2 to a release state. Any and all help wanted and needed.
View attachment 1511884

What about this fix I tried several months ago for the RT Spa 66? (and reposted just above )

Works here with CSP 0.3.0.p212

[SHADER_REPLACEMENT_...]
ACTIVE=1
DESCRIPTION= fixing mirror effect raidillon
MESHES=vis_1ROAD_1_001
MATERIALS= ROAD_TRACKMAIN01_WET
SHADER = ksPerPixelMultiMap_NMDetail
PROP_... = ksAmbient, 0.38
PROP_... = ksDiffuse, 0.33
PROP_...= fresnelC, 0.3
PROP_... = fresnelEXP, 6
PROP_... = fresnelMax,0.6
PROP_... = ksSpecular, 0.1
PROP_... = ksSpecularEXP, 10
RESOURCE_3= txDetail
RESOURCE_FILE_3= tarmac-detail.dds
RESOURCE_4= txNormalDetail
RESOURCE_FILE_4= tarmac-detail_NM.dds


(Yeah , just trying here to make you release a v2 )

 

[RMi_wood]

What about this fix I tried several months ago for the RT Spa 66? (and reposted just above )

Works here with CSP 0.3.0.p212

[SHADER_REPLACEMENT_...]
ACTIVE=1
DESCRIPTION= fixing mirror effect raidillon
MESHES=vis_1ROAD_1_001
MATERIALS= ROAD_TRACKMAIN01_WET
SHADER = ksPerPixelMultiMap_NMDetail
PROP_... = ksAmbient, 0.38
PROP_... = ksDiffuse, 0.33
PROP_...= fresnelC, 0.3
PROP_... = fresnelEXP, 6
PROP_... = fresnelMax,0.6
PROP_... = ksSpecular, 0.1
PROP_... = ksSpecularEXP, 10
RESOURCE_3= txDetail
RESOURCE_FILE_3= tarmac-detail.dds
RESOURCE_4= txNormalDetail
RESOURCE_FILE_4= tarmac-detail_NM.dds


(Yeah , just trying here to make you release a v2 )

are you replacing these with new files?

RESOURCE_3= txDetail
RESOURCE_FILE_3= tarmac-detail.dds <-------------?
RESOURCE_4= txNormalDetail
RESOURCE_FILE_4= tarmac-detail_NM.dds <-------------?

 

[ninezeroniner]

F302's Ferrari 365 GTB4 Competizione fictional skins

Dec 10, 2025

burn that rubber chicken

• ninezeroniner
• Skins

Skin updated, added new skin, now including oily smoke config adapted to F302's Daytona.

 

[ancient_3]

are you replacing these with new files?

RESOURCE_3= txDetail
RESOURCE_FILE_3= tarmac-detail.dds <-------------?
RESOURCE_4= txNormalDetail
RESOURCE_FILE_4= tarmac-detail_NM.dds <-------------?

No, I just used the original values and the textures of the original shader (which is ksMultiLayer_fresnel_nm in RT Spa'66 revisited by @racinjoe013 )

I was not able to make this mirroring effect disappear by changing the original values of the original ksMultiLayer_fresnel_nm shader

 

[k_p]

Question for you (and @Fall Guy, and anyone else who's mastered refractive lights via config)... could refractive lights be added to VRC's super tourers? I love these cars but when chasing down a pack of them the rear lights of the cars in front look pretty awful by modern modding standards. Some rear lights on the super tourers are very flat and dull, and don't look much better than NASCAR fake-light decals. Refractive lights would be the icing on the cake for this otherwise wonderful pack.

This is best what can be done without modifying 3d mesh and creating new textures. They aren't created with refraction in mind so they doesn't look good. For example revese light and turn signals using same mesh so one of them won't work.

When i make mod i separate for left and right and then individual functions like reverse light, brake light and turn signals.

First you need to unpack data.acd and delete light.ini or at least remove lines corresponding to rear lights in above mention file.
Based lighting on this file mess up light when you setting up refraction and selflighting. All lighting should be set in ext_config to make full use of CSP functions.

NGL the best for refraction are cars based on Gran Turismo because they have it originally

 

[Gabriele]

Custom Championship: from FIA GT '02 to FIA GT '03
Same mods (RSS GT Legend Pack + Porsche 992 GT3 GtSupreme)
Same circuit (Brno reworked https://www.assettoworld.com/track/automotodrom-brno-1 )
ONLY the skins changed
Can someone please explain to me why the game keeps crashing with this error? Everything is the same except the skins, I can't figure it out...😖🤬

"CRASH in:
OS-Version: 6.2.9200 () 0x100-0x1
WARNING: TaskBarIcon :: COULD NOT FIND TEXTURES FOR IMGUI_LUA_Stretched Grid_main_ICON
ERROR: SymGetSymFromAddr64, GetLastError: 487 (Address: 00007FFA12AA2F05)
00007FFA136686ED (DWrite): (filename not available): (function-name not available)
d:\dev\dev_pc_master_race\ksphysicsac\car.cpp (1671): Car:ollControls"

 

[sab001]

@Gabriele: If you turn off the Stretched Grid app, does it then work? Maybe just re-install the Stretched Grid app.

 

[Carter_1975]

What about this fix I tried several months ago for the RT Spa 66? (and reposted just above )

Works here with CSP 0.3.0.p212

[SHADER_REPLACEMENT_...]
ACTIVE=1
DESCRIPTION= fixing mirror effect raidillon
MESHES=vis_1ROAD_1_001
MATERIALS= ROAD_TRACKMAIN01_WET
SHADER = ksPerPixelMultiMap_NMDetail
PROP_... = ksAmbient, 0.38
PROP_... = ksDiffuse, 0.33
PROP_...= fresnelC, 0.3
PROP_... = fresnelEXP, 6
PROP_... = fresnelMax,0.6
PROP_... = ksSpecular, 0.1
PROP_... = ksSpecularEXP, 10
RESOURCE_3= txDetail
RESOURCE_FILE_3= tarmac-detail.dds
RESOURCE_4= txNormalDetail
RESOURCE_FILE_4= tarmac-detail_NM.dds


(Yeah , just trying here to make you release a v2 )

This seems to have done the trick for me. Thank you so much. I'd have never figured this out myself.

 

[Aaron Green]

How can I turn it into AWD? Which files do I need to change?

I'm actually working on a AWD2 version of it now. But so far I'm having to tweak the tyre grip and aero figures a bit due to it being massively tail happy. But it shouldn't take too long, I just used car tuner to clone the car and then edited the drivetrain file as mentioned by others. It won't be a historically accurate version as apparently the Quattro had a 50:50 diff split. I'm having to put quite a bit more drive into the front wheels to stop the tail happiness on power, but it's definitely getting there stability wise, and of course it's extremely fast off the lights 😂