senza cameraCan’t even drive the 200 layout (ai spline broken).
The 300 layout works but is nowhere near the visual quality of my good old version!
Edit: I should add it's the snetterton v1.2 by Reboot Team, Sliderman and gunnar333 I was comparing with.
Thanks to the tip from @samdale12 I was able to try the 200 layout too.
Never had any real complaints about this.Good evening, does anyone happen to know of any updates for the "Montaga di Pietra by RMI 1.30" track?
Today, resuming my simulation of the "Mille Miglie 1955," I was going to use this track for the first part (arrival in Rome)...
however, I couldn't play, even with only 5 opponents on the track (it was running at 15/20 fps) and then it would freeze completely or return to CM.
I had to use "plan B," that is, I used the "LuccaRing" track with the same 5 opponents (everything running normally).I would appreciate it if anyone has any updates (I haven't found anything...)
The only things I had installed were:Side note:
For better or worse, it's common to report problems with Assetto Corsa, and sometimes they only affect one or two persons, while the rest are unaffected. If it's a general problem that affects everyone, you know it will be resolved sooner or later, but those kinds of bugs that only affect few people are more frustrating...
When these problems are discussed, suspicion usually falls on a particular version or setting of CSP, CM, Windows, etc., but the affected person almost never mentions whether they have any side apps installed (AI related, mainly) that might be contributing to the malfunction. It would also be helpful to mention if we have any apps of this type installed; the more information provided, the more clues the forum experts will have to figure out what is causing the bugs... 🤔
(Thinking Out Loud Mode, Off).
@leBluem solved by updating to a newer CSP version, more precisely the v0.3.0-p140 since the v0.3.0-p212 causes me issue with other ext_config settings i use when i update tracks, no idea on why tho, but the track works fine now.hi @leBluem on my side, the track keeps crashing on loading
View attachment 1511550
I've tried redownload the full package but no luck. Any idea?
Thanks
Yesterday I was getting an CM update from a working Le Mans track that was after finishing the update bringing me only a failure message. Downloaded the complete updated track from the website and now it was ok. Could be your track is also been corrupted by something, like extra pits mod, a skin, AI mod etc etc.Good evening, does anyone happen to know of any updates for the "Montaga di Pietra by RMI 1.30" track?
Today, resuming my simulation of the "Mille Miglie 1955," I was going to use this track for the first part (arrival in Rome)...
however, I couldn't play, even with only 5 opponents on the track (it was running at 15/20 fps) and then it would freeze completely or return to CM.
I had to use "plan B," that is, I used the "LuccaRing" track with the same 5 opponents (everything running normally).I would appreciate it if anyone has any updates (I haven't found anything...)
3 cams for the National layout of "bam_calder_park_raceway".
Beautifull track but awfull generic cams. I hope you will like them.
Have fun
Link is dead. Would it be possible to reupload it pleaseHere's a fix to thin out/antialias the overhead cables.
![]()
WeTransfer | Send Large Files Fast
The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.we.tl
Ok, so i made for other one. As i said before they aren't created for this to work so it seems to me that it is pointless even looking into next cars and I have only 3 of them, old versions, from which last one doesn't have fully modelled taillights needed for refraction to work. Its just plain texture, so cant do anything about it. Its up to them to fix that because they take the money anyway. Imo it looks like their cars are made for pre-CSP game at least on this matter.To me that's a huge improvement over the original VRC lights, which were dull and flat. The lenses weren't even reflective on this Vorax. With your mod the lights now have depth, the lenses actually look like translucent plastic, and the light scatters convincingly as it refracts. You say the mesh construction isn't ideal and you don't sound entirely happy with the result but nevertheless, I think you've done a great job and have definitely improved this car. The loss of turn signals is a small price to pay, and who needs blinkers on a touring car anyway? Great job, and many thanks. I hope you'll eventually do the same for the rest of the VRC touring cars.
I drove the non-CSP version by mistake, and it was very easy to spin. The CSP version behaves like I would expect. Could be something there. Still easy to spin, like a rwd on stiff suspension should be, but not overly so.That BMW is very easy to spin. At least for me it is.
I haven't driven the non-CSP version, I was driving the CSP version. I seem to remember having the same trouble with it in PC2.I drove the non-CSP version by mistake, and it was very easy to spin. The CSP version behaves like I would expect. Could be something there. Still easy to spin, like a rwd on stiff suspension should be, but not overly so.
But I think the wipers are designed for Bilbo Baggins' car. Both on the BMW and the Audi, they are way too small...
Yes, they do.Do the new VRC supertourers still have a non CSP version for older CSPs included ?
On their page is only the note about must have newer version.
Just FYI, your ext_config binds the hood and door animation to extra_a resp. extra_b, which is normally the ignition and starter function. I had to re-assign the animations for the hood and door to different extra functions, otherwise the hood opens while the car is getting started.Ok, so i made for other one. As i said before they aren't created for this to work so it seems to me that it is pointless even looking into next cars and I have only 3 of them, old versions, from which last one doesn't have fully modelled taillights needed for refraction to work. Its just plain texture, so cant do anything about it. Its up to them to fix that because they take the money anyway. Imo it looks like their cars are made for pre-CSP game at least on this matter.
ext_config for vrc_erc_1999_fortix and again you need to unpack data and delete lines for rear lights from light.ini
View attachment 1512063View attachment 1512064
They can keep it to themselves and enjoy it on their own. I’m not going to install any third-party apps or link my Steam account to an external website just to use a mod. Either it’ll get leaked eventually, losing their bad idea of using this system, or it’ll just stay on their PC or on a third-party cloud like the one or this app hosting...It seems that we've reached the DRM status of mod creators. Man..
And it’s exactly what many of us feared. I just came across this listing for this 1970 BRM P153. On the surface, it looks fine it’s listed as a $0.00 (Free) resource. But look closer at the blue box on the right: "DRM Protected Mod" "This mod must be downloaded and installed through the SimVendor desktop application for DRM protection." That’s right. You now need to install a proprietary desktop application and sign in just to use a free Assetto Corsa mod.
View attachment 1512132
Thanks for the feedback. I'll try that. With just one car (it's perfect). But without stress, I'll also see if it could be something related to the "CSP" or something else...Never had any real complaints about this.
You can try to disable camera facing crowds by renaming ./data/camera_facing.ini it might help
Dw this will be bypassed soon, Someone already figured out how to copy all the files lol.It seems that we've reached the DRM status of mod creators. Man..
And it’s exactly what many of us feared. I just came across this listing for this 1970 BRM P153. On the surface, it looks fine it’s listed as a $0.00 (Free) resource. But look closer at the blue box on the right: "DRM Protected Mod" "This mod must be downloaded and installed through the SimVendor desktop application for DRM protection." That’s right. You now need to install a proprietary desktop application and sign in just to use a free Assetto Corsa mod.
View attachment 1512132
Thankyou, this prevents the mirror effect, but it creates a new problem, at least on my side:I had the same bug and solved it in some way by modifying the ext-config.ini, check this post :
Hi friends,
I'm currently reviewing all tracks > 7km in my track list
While testing Spa66 from Reboot Team updated by racing joe013 1.06 , I found a mirroring effect seen at Raidillon from Eau Rouge that I do not like .
I was able to disable it by making a wild shader replacement with ksPerPixelMultiMap_NMDetail, that uses original values and part of the texture of the original shader (which is ksMultiLayer_fresnel_nm)
[SHADER_REPLACEMENT_...]
ACTIVE=1
DESCRIPTION= fixing mirror effect raidillon
MESHES=vis_1ROAD_1_001
MATERIALS= ROAD_TRACKMAIN01_WET
SHADER =...
Thanks!
No problem. I had actk. But it may work on original sdd to.Thanks!
Original SDD or ACTK's version? Your UI seems to imply the overhaul is based on the ACTK one.
This just seems like another one of the HSS guy's silly ideas to make sure he can monetize his crappy mods. Unfortunately he has other modders who he's friendly with he manages to rope into this **** constantly. It'll fail just like his last website that tried this.It seems that we've reached the DRM status of mod creators. Man..
And it’s exactly what many of us feared. I just came across this listing for this 1970 BRM P153. On the surface, it looks fine it’s listed as a $0.00 (Free) resource. But look closer at the blue box on the right: "DRM Protected Mod" "This mod must be downloaded and installed through the SimVendor desktop application for DRM protection." That’s right. You now need to install a proprietary desktop application and sign in just to use a free Assetto Corsa mod.
Here it is. Remove the .txt extensionLink is dead. Would it be possible to reupload it please![]()