Assetto Corsa PC Mods General DiscussionPC

[MS6Driver]

WEC 2025 United Autosport #95 Mclaren GT3 Evo

It´s WEC time :) lets start with the United Autosports Mclaren #95. #59 will follow the next days working illuminated numberplate correct tyres correct driver names WEC rear-wing endplates requiered car: mclaren_720s_gt3_evo_endurance...

www.overtake.gg

It´s WEC time

lets start with the United Autosports Mclaren #95.

#59 will follow the next days

working illuminated numberplate
correct tyres
correct driver names
WEC rear-wing endplates

requiered car:
- mclaren_720s_gt3_evo_endurance or
- mclaren_720s_gt3_evo_sprint by FSR
or the beta of
- mclaren_720s_gt3_evo_endu_2024 by MS6Driver


missing things:
the new position panel. - I will update the skin as soon as suitable position panels are available

 

[Ken134]

Just to let everyone who plays in Vr don’t update to the latest Nvidia driver as it screws up Vr in AC.

 

[MasterFocus]

It's not exactly an Content Manager update, but a data version update to 211. Not sure what the difference between the two is, but I would imagine less significant changes to the app itself...

Happy to help!


check for updates & update to non-tested values are both disabled on my install

Its enough to reset any setup you had with car (paint)

 

[Masscot]

Just to let everyone who plays in Vr don’t update to the latest Nvidia driver as it screws up Vr in AC.

In what way? Tanks the FR?

 

[MeltFire]

The Adaptive AI kinda have me intrigued, if it's anything like Raceroom or rFactor2 adaptive AI. (doubt it), but as a offline enjoyed, any AI update is a welcome one.

 

[The Vampire]

Just to let everyone who plays in Vr don’t update to the latest Nvidia driver as it screws up Vr in AC.

572.60? Works perfectly fine over here.

 

[TonySSS]

WEC 2025 United Autosport #95 Mclaren GT3 Evo

It´s WEC time :) lets start with the United Autosports Mclaren #95. #59 will follow the next days working illuminated numberplate correct tyres correct driver names WEC rear-wing endplates requiered car: mclaren_720s_gt3_evo_endurance...

www.overtake.gg

It´s WEC time

lets start with the United Autosports Mclaren #95.

#59 will follow the next days

working illuminated numberplate
correct tyres
correct driver names
WEC rear-wing endplates

requiered car:
- mclaren_720s_gt3_evo_endurance or
- mclaren_720s_gt3_evo_sprint by FSR
or the beta of
- mclaren_720s_gt3_evo_endu_2024 by MS6Driver


missing things:
the new position panel. - I will update the skin as soon as suitable position panels are available


View attachment 1432338

View attachment 1432332View attachment 1432333View attachment 1432335View attachment 1432334View attachment 1432337View attachment 1432336

Will your version also have the Sprint variant?

 

[ninezeroniner]

It's not exactly an Content Manager update, but a data version update to 211. Not sure what the difference between the two is, but I would imagine less significant changes to the app itself...

Happy to help!


check for updates & update to non-tested values are both disabled on my install

both options are off here too.

 

[MS6Driver]

Will your version also have the Sprint variant?

the skin itself works, because I used the AO map of the sprint version. Only the config.ini needs to be adjusted. The next update will work perfectly for booth. Maybe I will add the TRR one two.

But I’m also working on an updated version of the FSR cars. I’m not sure if Fernando will add my updates to his cars or I’m releasing my own versions.

I know he's not exactly popular here in the forum, but he's a really nice and courteous person. Working with him goes well.

 

[Gregz0r]

Just to let everyone who plays in Vr don’t update to the latest Nvidia driver as it screws up Vr in AC.

Woah. In what way?

 

[SpeedStar2000]

VRC has dropped the Isotta and a bonus: they dropped a Cadillac aswell!!

that's 3 high quality cadillacs now.

 

[Jezza819]

VRC has dropped the Isotta and a bonus: they dropped a Cadillac aswell!!

that's 3 high quality cadillacs now.

I think I saw where all of the other Hypercars/LMDh got updated also?

 

[petercrill]

Mini John Cooper Works GP 2021 Public Release!!
Download:https://www.mediafire.com/file/ad31thg9hvyr6qr/mini_jcw_gp_2021_101CREATIVE.rar/file
Converted From FH5
-AO inside and out
-Realistic Dashboard
-Physics
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal

 

[X90]

VRC has dropped the Isotta and a bonus: they dropped a Cadillac aswell!!

that's 3 high quality cadillacs now.

And still no quality DPI-VR.

😔

 

[jac0]

hi all , I thought I'd try the "NoHesi" for a first time... joined a public EU server running the map "nohesi_415" ...

I got only 35 fps on average, with a very high GPU and CPU usage, so UNPLAYABLE
Also offline this map with just 1 car on it gives me very high CPU usage , where on other maps with many cars it's all good w steady FPS and cpu and gpu only around 50%
(my specs: 32gb ddr4 3600, Ryzen-9 5950x, 4080s 16GB, Windows 10 Pro, Quest3 via Oculus Link.)

Anyone an idea what could be wrong with this "nohesi_415" map (or what trickery to do to use it normally in VR) ?

 

[Masscot]

Mini John Cooper Works GP 2021 Public Release!!
Download:https://www.mediafire.com/file/ad31thg9hvyr6qr/mini_jcw_gp_2021_101CREATIVE.rar/file
Converted From FH5
-AO inside and out
-Realistic Dashboard
-Physics
-CSP Settings
-Driver Animation
-Panoramic session Start config Daniel Nogal

View attachment 1432382View attachment 1432384View attachment 1432385View attachment 1432386View attachment 1432387View attachment 1432388View attachment 1432389View attachment 1432391View attachment 1432392View attachment 1432393View attachment 1432396

Don't know if it's my PPF or not but the rear light cluster refractions seem broken, and the 'Union Jack' design of the cluster isn't visible until the lights are on.
Should look more like this with lights off:

Backup the config and try this one, it looks better to me?
It blocks the broken refraction and makes the UJ design faintly visible when lights are off.

 

[Crazydude]

I tried the FFB script, nice detail here and there but overall the wheel feels wayyyy lighter and wobbly on my DD.
Maybe it mainly for non-dd?

I noticed the same when I first tried it. Are you running your base at 100%?

I have the 20nm VRS DD, my usual setup was 50% on the base and around 40% gain in game. That gave me a good balance between FFB and bump/kerb effects. If I increased the base and even with lowering the game gain the bump/kerb effects would become more jarring, like more aggressive than they should be relative to the ffb, even though I had them at 0% in the game settings.

With the FFB script on my usual settings it felt too light as you observed as well. I noticed with the script the FFB bar was more sensitive and I was clipping. I bumped my base to 100% and gain to 30% in game. This now gave me a good FFB feel and the bump/kerb effects are still balanced. If I turn off script with these settings - I again see too aggressive effects.

I havent done enough testing yet, but with the FFB script I do feel a bit more detail and the cars feel like they have more weight to them. Like less of that AC floaty feeling and when turning it doesnt feel as much like I am pulling on a band if that makes any sense.

Anyone else on a DD base try out the new script and want to chime in? Seems the script works on both the standard physics and if you check extended physics too.

 

[MasterFocus]

I noticed the same when I first tried it. Are you running your base at 100%?

I have the 20nm VRS DD, my usual setup was 50% on the base and around 40% gain in game. That gave me a good balance between FFB and bump/kerb effects. If I increased the base and even with lowering the game gain the bump/kerb effects would become more jarring, like more aggressive than they should be relative to the ffb, even though I had them at 0% in the game settings.

With the FFB script on my usual settings it felt too light as you observed as well. I noticed with the script the FFB bar was more sensitive and I was clipping. I bumped my base to 100% and gain to 30% in game. This now gave me a good FFB feel and the bump/kerb effects are still balanced. If I turn off script with these settings - I again see too aggressive effects.

I havent done enough testing yet, but with the FFB script I do feel a bit more detail and the cars feel like they have more weight to them. Like less of that AC floaty feeling and when turning it doesnt feel as much like I am pulling on a band if that makes any sense.

Anyone else on a DD base try out the new script and want to chime in? Seems the script works on both the standard physics and if you check extended physics too.

Base at 100% and gain 100% too
I only have a Moza R5 with 5.5nm
I might try to change the "alternative ffb seetings" and see if its better

 

[shi]

Looks so much better than the oversatured, overbright 1988 version.

Now it's impossible for me to get back to that track bc your take on the 1982 is perfect lol

Wish the 1988 variant would get the same treatment...

Thank you very much!
The F1C Track mods include variations for each year from 1982 to 1988 for Detroit.
With my motivation, I can convert them.

 

[xezez]

Here's a question for those with better memories than me.

I'm trying to remember the name of a track, which is a fictional track imported from some earlier sim. It's kind of has a winding Scottish countryside feel, but the defining thing I remember is where you come down a long downhill sweeping right-hander past a pub where there's inappropriate Irish folk music blaring out... just before you cross a bridge.

Big thanks to anyone who can identify this for me!

 

[marc magnela]

 

[Ken134]

In what way? Tanks the FR?

Hi.When you go to race the VR screen goes grey.

 

[Frank25]

Here's a question for those with better memories than me.

I'm trying to remember the name of a track, which is a fictional track imported from some earlier sim. It's kind of has a winding Scottish countryside feel, but the defining thing I remember is where you come down a long downhill sweeping right-hander past a pub where there's inappropriate Irish folk music blaring out... just before you cross a bridge.

Big thanks to anyone who can identify this for me!

Bannochbrae

rt_bannochbrae_1.5

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[xezez]

Thanks, but it's not Bannochbrae. It does have a similar feel to that though.

 

[samdale12]

Bannochbrae

rt_bannochbrae_1.5

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

I think it might be the alternate version, Misty Loch

 

[Triplexbee]

Thanks, but it's not Bannochbrae. It does have a similar feel to that though.

RT Misty Loch https://www.mediafire.com/file/m4g2kfrjyhtm620/rt_misty_loch.7z/

Edit NInJad.

 

[xezez]

RT Misty Loch https://www.mediafire.com/file/m4g2kfrjyhtm620/rt_misty_loch.7z/

Edit NInJad.

I think it might be the alternate version, Misty Loch

Hmm. That sounds promising. And it's also suspiciously missing from my track library now, which is probably why I haven't been able to find it for months!

Thanks. I'll reinstall it and see if the puzzle is solved.

EDIT: Bingo! You and samdale12 hit the jackpot. Thanks to you both for that. Much appreciated. (And thanks to Frank25 too for another good guess.)

 

[monyx]

Anyone else on a DD base try out the new script and want to chime in? Seems the script works on both the standard physics and if you check extended physics too.

Using Simucube 1 20Nm 22-bit (4.2M) encoder I tried the alternative ffb script - I'm sure they were in there before, but maybe not this one? Yes lighter ffb, I like it better not just for granular road feeback, but also softer transition when I load/unload front of car with throttle particularly how a 911 responds mid-corner. More subtle instead of an unrealistic sort of thudding I had before (using real feel forces set for 18Nm). Particularly like feeling higher sliding forces. Only tested with zgshnk's Singer 911 so far, yet to try an open-wheeler but I don't drive them often. Script and Simucube driver setting attached.

 

[Steve Hayward]

I noticed the same when I first tried it. Are you running your base at 100%?

I have the 20nm VRS DD, my usual setup was 50% on the base and around 40% gain in game. That gave me a good balance between FFB and bump/kerb effects. If I increased the base and even with lowering the game gain the bump/kerb effects would become more jarring, like more aggressive than they should be relative to the ffb, even though I had them at 0% in the game settings.

With the FFB script on my usual settings it felt too light as you observed as well. I noticed with the script the FFB bar was more sensitive and I was clipping. I bumped my base to 100% and gain to 30% in game. This now gave me a good FFB feel and the bump/kerb effects are still balanced. If I turn off script with these settings - I again see too aggressive effects.

I havent done enough testing yet, but with the FFB script I do feel a bit more detail and the cars feel like they have more weight to them. Like less of that AC floaty feeling and when turning it doesnt feel as much like I am pulling on a band if that makes any sense.

Anyone else on a DD base try out the new script and want to chime in? Seems the script works on both the standard physics and if you check extended physics too.

Until I read these posts I had not put 2 and 2 together because my ffb had been feeling weird over the last few days, very twitchy and grainy as hell when turning but i had not really sunk in the fact it was different. So I have now looked at the settings and the changes are very obvious to the feel and I guess everyone will be affected in a different way. I have tried most combinations in the csp ffb section and cant get the feel I want. However, I have now unchecked the active box completely and activated the experimental section in A/C ffb section. I now have my feedback running as I liked it before it was messed with. I'm running a csl dd 8nm that I run at 100% at base and 60% in game.

There's an old saying 'disturb 💩 and it smells'

 

[Ken134]

Woah. In what way?

When going to race the vr screens go grey. I’m on Pimax crystal . Rolled back to version before all works fine. Strange