Assetto Corsa PC Mods General DiscussionPC

[TheRealCeeBee]

you do not need to live in those countries, just pick any country and download it, nothing stopping you.. unless you are using a "non steam copy", I guess thats another matter altogether.

Grabbed a clip around a little hill in australia. It goes ok, my ****** driving skills aside..

 

[SoulMaTriX]

There is nothing illegal about it, it is a free DLC, but to register to the competition you have to be a resident of one of the country in the list. Not from a country in the list only means you cannot compete, not that you cannot enjoy the car in you game.
As a Canadian, I am also looking for a link to that car.

I am not in those countries as well. On the registration put Spain as my country and got a code after an email confirmation. Not sure if people will share so I registered.

 

[SoulMaTriX]

There's been a lot of work done to that car in this forum. I would go perusing for that and see how much better it is than the official release.

Thanks. I do have the GTP version which is great prior to this "official version." Appreciate the redirection!

 

[dms]

Can anyone lead the way to the ACC Porsche 991 GT3R maybe? Cannot find it on the earlier discord link...

 

[WazzuRacer]

Thanks for the AI update @KevinK2 Havent used this track for quite a while - Did a few races on VRC Alabame-Barber Motorsports with new AI and discovered that my SURFACES file was missing the KEY=ROAD friction parameter. Below is what I added. Was wondering why the track was so slippery. I dont know what the default is if you are missing a KEY friction - is it like ..80?

Added at end of my surfaces file - if you have this paid track - check to see if you have this

[SURFACE_7] --- check to make sure the numbering is correct in your Surfaces file
KEY=ROAD
FRICTION=0.97
DAMPING=0
WAV=
WAV_PITCH=0
FF_EFFECT=NULL
DIRT_ADDITIVE=0
IS_VALID_TRACK=1
BLACK_FLAG_TIME=0
SIN_HEIGHT=0
SIN_LENGTH=0
IS_PITLANE=0
VIBRATION_GAIN=0
VIBRATION_LENGTH=0

Some of you may have these below: My track was the orig track from VRC
NOTE: Only tried the billboards so far and only installed the skins not the other stuff.

Billboards - gets rid of VRC signs
https://www.racedepartment.com/downloads/barber-motorsports-park-2019-2020.25585/

Red White Kerbs
https://www.racedepartment.com/down...or-vrc-barber-alabama-motorsports-park.31611/

Cameras to try - save your old ones in case
https://www.racedepartment.com/downloads/vrc-alabama-tv-cameras.26264/

My version has a config file with some lights, but no Grass FX yet - if someone would like to add that to the config file.

Okay. Where is the surfaces file supposed to reside? I don't see anything in the file that looks similar.

 

[Envoxeb]

Can anyone lead the way to the ACC Porsche 991 GT3R maybe? Cannot find it on the earlier discord link...

"911 IS TAKEN DOWN FOR UPDATES; I DONT KNOW WHEN I WILL BE MOTIVATED ENOUGH TO FINISH IT"

but he'd posted some screenshots of a 1.00 version, also check #announcements channel ffs

 

[Renzobich]

Moding question,
I have a problem with the car, some objectors look chopped or incomplete in ks editor, in 3ds max they look fine,
with some models this happens to me...

 

[Fall Guy]

Reg. the error message CM provides currently: remove the line 1.16.4 in changelog.txt and everything is fine again (or rename it at least to 1.16.3).

 

[Fanapryde]

Reg. the error message CM provides currently: remove the line 1.16.4 in changelog.txt and everything is fine again (or rename it at least to 1.16.3).

OK, it's getting late and I'm getting tired, so I'm not thinking clear...
Where again do I need to change that ?

 

[MrB00]

OK, it's getting late and I'm getting tired, so I'm not thinking clear...
Where again do I need to change that ?

Ac main folder - changelog.txt

 

[Fanapryde]

Ac main folder - changelog.txt

That I tried, thanks, but I still get that error, hence my question...

Edit, hold on, after two times closing and reopening CM, the error message is gone...

 

[WazzuRacer]

Okay. Where is the surfaces file supposed to reside? I don't see anything in the file that looks similar.

Figured it out. Should have known where to look but I was looking in the main file.

 

[TheRealCeeBee]

modding question, but, backend modding of game export. may not be for this thread, and if anyone knows of a better place please send me info.

I want to build a dedicated serial screen dash like i did for this project on one of my motorcycles, i will 3dprint a housing for it to sit in my rig, so does anyone know where i can find the protocols of the shared memory and or the network share info coming out of AC as it occurs to me if velocity and gforce are coming out, its not a big jump to driving some servos with it as well..

(skip in to about 30sec or so)

 

[MrB00]

That I tried, thanks, but I still get that error, hence my question...

Edit, hold on, after two times closing and reopening CM, the error message is gone...

I think it waits till you've posted a comment saying it hasn't worked and then it works

 

[ales100i]

I have a weird problem after the 1.16.4. Lanzo V12 default setup is showing as to low when I want to race. Have to raise the car two clicks in the front and back, to meet the minimum requirement. It never did that before. Does anybody know why this happening and even more importantly how to fix it? I know I can edit the setup, to raise the car, but I don't want to do that. It handles much better when it's lower. Thanks.

 

[Smurth]

I have a weird problem after the 1.16.4. Lanzo V12 default setup is showing as to low when I want to race. Have to raise the car two clicks in the front and back, to meet the minimum requirement. It never did that before. Does anybody know why this happening and even more importantly how to fix it? I know I can edit the setup, to raise the car, but I don't want to do that. It handles much better when it's lower. Thanks.

Check the Tyre blanket thing

:

 

[Steveo324xx]

Sorry for being such a stranger lately. Has anyone noticed AC wanting to update itself? I click the link for news on it and there is no info. Any ideas on what this update does and has anyone tried it yet?View attachment 947463

how are you man? yeah there's an update and a new car.

 

[dathyr]

Okay. Where is the surfaces file supposed to reside? I don't see anything in the file that looks similar.

Open up the Track folder - then open up the Data folder - in there you should/will see a SURFACES file

Open that up and copy/paste my text at the end of the rest of the text that is in the files. Make sure
that SURFACE_7 is the next number in sequence with the others that are in the file.


If you dont understand this, look at other tracks and their folders.

 

[ales100i]

Check the Tyre blanket thing

:View attachment 947560

Thanks it works. I don't remember disabling tyre warmers. Weird. I guess the setting got reset for some reason.

 

[_arg0naut_]

They are part of a skin pack I made for the 1996 JGTC season.

It requires Velo's NSX, Legion's 993, this 964 and this 300ZX.

You will also need JeezyCreezy's R33 and this McLaren skin to complete the GT500 grid, along with my Supra.

You link to Legion's 993, which folder is "legion_porsche_993_gt2", although you skin pack file has the "porsche_993_gt_evo_sp" folder.

 

[CdnTDog]

Reg. the error message CM provides currently: remove the line 1.16.4 in changelog.txt and everything is fine again (or rename it at least to 1.16.3).
View attachment 947556

Thanks for this!

 

[Outspacer]

modding question, but, backend modding of game export. may not be for this thread, and if anyone knows of a better place please send me info.

I want to build a dedicated serial screen dash like i did for this project on one of my motorcycles, i will 3dprint a housing for it to sit in my rig, so does anyone know where i can find the protocols of the shared memory and or the network share info coming out of AC as it occurs to me if velocity and gforce are coming out, its not a big jump to driving some servos with it as well..

(skip in to about 30sec or so)

Some links I had stashed...
UDP sockets: https://docs.google.com/document/d/1KfkZiIluXZ6mMhLWfDX1qAGbvhGRC3ZUzjVIt5FQpp4/pub
shared memory: https://assettocorsamods.net/threads/doc-shared-memory-reference.58/
and: https://github.com/hamakobe/Kabal/raw/master/ACSharedMemoryDocumentation.pdf
servos? SFX100 motion: https://www.racedepartment.com/threads/the-simfeedback-ac-diy-motion-simulator-thread.159524/

I played with the shared memory briefly looking at lap timings, might be able to help in that area if needed

 

[Real Toonces]

Yes, but to register you need to choose your country in the list, are you saying we should register using a country in the list that is not our country?

Is a VPN the solution?

 

[TheRealCeeBee]

Some links I had stashed...
UDP sockets: https://docs.google.com/document/d/1KfkZiIluXZ6mMhLWfDX1qAGbvhGRC3ZUzjVIt5FQpp4/pub
shared memory: https://assettocorsamods.net/threads/doc-shared-memory-reference.58/
and: https://github.com/hamakobe/Kabal/raw/master/ACSharedMemoryDocumentation.pdf
servos? SFX100 motion: https://www.racedepartment.com/threads/the-simfeedback-ac-diy-motion-simulator-thread.159524/

I played with the shared memory briefly looking at lap timings, might be able to help in that area if needed

awesome thank you! the screen is serial, so im guessing shared mem to serial comm is easiest way, heaps of code in c# for it from other projects, I have built wireless stuff before, but, !PITA!, and have built a LOT ofcnc machines over the years, so I am pretty interested in seeing if i can cook up a servo/actuator motion build from the sharem info.

I did cook up a pretty quick and dirty shared mem app some time back, but, it was using a rather cripled github library, there is a LOT more info in the links you shared than was exposed by that dll, it is very rudimentary. Many thanks again!

 

[ROZTER]

Is a VPN the solution?

Hi i all read try but some text tell me yur ip in not the correct country well weare gone a need to waitif ferrari do some challenge here in America

 

[Cote Dazur]

Is a VPN the solution?

No need for a VPN, just enter an email and they will send you a steam key.

 

[Outspacer]

awesome thank you! the screen is serial, so im guessing shared mem to serial comm is easiest way, heaps of code in c# for it from other projects, I have built wireless stuff before, but, !PITA!, and have built a LOT ofcnc machines over the years, so I am pretty interested in seeing if i can cook up a servo/actuator motion build from the sharem info.

I did cook up a pretty quick and dirty shared mem app some time back, but, it was using a rather cripled github library, there is a LOT more info in the links you shared than was exposed by that dll, it is very rudimentary. Many thanks again!
View attachment 947566

You're welcome! Shared memory is a doddle to get up and running even doing it 'raw' in C# or C++. For wifi I'd just go with a pi zero w these days - full linux, has the GPIO pins for serial output - total overkill, but only £10 so why not (In my case, why not is that my wifi is a different network to my wired stuff including my gaming PC, would have to proxy/tunnel it somehow which is extra hassle).

 

[protofb]

No need for a VPN, just enter an email and they will send you a steam key.

Is it bad to do this even if I don’t live in the EU?

 

[gutbomb]

Quick question. Is the ksPerPixelMultimap_emissive shader included in CSP? I downloaded it from race department a long time ago and I use it in most of the mod tracks I work on, and I distribute it with them too, but if it's included in CSP I don't need to include it with my track. Does anyone have any insight into that?

edit: it appears as if it's part of CSP and I don't need to include the shader with my downloads anymore as long as I mark it as CSP required. And all I use it for is making textures light up so you'd need CSP anyway.

 

[GzeroD]

Question on Legions website, Did a search on his website looking for the listing and links to the Ovals and roadcourses
he had. All I get now is the latest pictures of cars and tracks. When I click on go to older posts, nothing else comes up.
Only Oval I see is Eldora track.

I see you have it sorted now but, at the bottom of every post is this, 'Download: (click link & scroll down) No Right Turn'.
Did you not do that?