Assetto Corsa PC Mods General DiscussionPC

[Paulo Ribeiro]

Hi. Anyone have a Lamborghini Countach LP400? It can be of any quality.
Regards

Are you sure? I have one that doesn't turn, don't have doors, no dashboard, only have two wheels, only allow to engage 3rd gear,
and the smoke in the cockpit is so much that I can't see the road.

Has anybody tried the 720 GT3X? Is it any good?

This?

Not bad at all.

 

[woody122]

somebody mentioned NASCAR...
View attachment 1107176

yesssssssssssssss

From Ignition? Or scratch? Looks epic either way.

 

[Breathe]

I couldn’t test it with Pyyer‘s extension since I couldn’t find a working link for it.
It should work when combining both ext_configs

The link on the listing is working (Real Tab line 359)

 

[shi]

Its going better then I expected... for whatever reason my brain was working properly when i UV mapped the groove so its fully working now using the groove texture from Vancouver. I added a couple of higher quality trees for about 5 of the closer trees to test some detail.

A question for @RMi_wood or @shi , is there much value in increasing the subdivision of the road mesh if im not planning on adding noise. I have it split into a visual and physical mesh and I subdivided the physical mesh in the most basic way possible but is it worth doing this or does it add to the physics calculations.

Tobeka's road surface was originally divided horizontally into four sections.
I think it's worth subdividing it as you suggest.

 

[ROZTER]

somebody mentioned NASCAR...
View attachment 1107176

Woww looks great yeahhh

 

[akasson47]

has the new rf2 Indianapolis been converted to ac yet?

 

[Aaron Green]

I just watched a video of that circuit on YouTube - looks great! Looking forward to this 👍

this is from the rF2 version by 'senormen'

 

[ninezeroniner]

I hoped for a Lights config for Miami Bayside and here it is.
As you can read in the comments you can integrate my RainFx config, it's on RD too, and the tracks looks very nice.

 

[Breathe]

I hoped for a Lights config for Miami Bayside and here it is.
As you can read in the comments you can integrate my RainFx config, it's on RD too, and the tracks looks very nice.

Thank you. Both add-ons added on the listing (with the AI update too)

 

[JV82]

Hi guys! What do you think of VRC pay mod tracks?
Texas, Willow and Barber. Best version available of these circuits? Thanks.

 

[Fall Guy]

yesssssssssssssss

From Ignition? Or scratch? Looks epic either way.

NASCAR Heat convert I suppose. Not Ignition.

 

[lorelord]

Hey All. I had two questions

1. I've calculated the AO for an object via CM but when its applied it comes out tiled, even though the dimensions are the same. What am I doing wrong?



2. Where in the tyres.ini (if that's where it is) can I make the tyre size wider to match the model? I can see diameter but not width.



Thanks!

 

[iBob78]

Are you sure? I have one that doesn't turn, don't have doors, no dashboard, only have two wheels, only allow to engage 3rd gear,
and the smoke in the cockpit is so much that I can't see the road.

This?
View attachment 1107213

View attachment 1107214

Not bad at all.

Hi, paid mod ? if not do you have a link ? thx

 

[Aaron Green]

Has anyone got a live link to Crash's Porsche ACC conversion? Someone posted a page with all the ACC conversions a few pages back on this thread and all the car links work except that one!

 

[Paintbox]

Hi guys! What do you think of VRC pay mod tracks?
Texas, Willow and Barber. Best version available of these circuits? Thanks.

I'm not an expert on the track but I got Barber and I'm really happy with it. VRC expected quality and feels great to drive.

 

[ZombieBoy1978]

Hi guys! What do you think of VRC pay mod tracks?
Texas, Willow and Barber. Best version available of these circuits? Thanks.

By far the best versions, but as pay mods, they have fictional advertising etc, so search on here and RD for skins.

 

[alexlockout]

Hey All. I had two questions

1. I've calculated the AO for an object via CM but when its applied it comes out tiled, even though the dimensions are the same. What am I doing wrong?



2. Where in the tyres.ini (if that's where it is) can I make the tyre size wider to match the model? I can see diameter but not width.



Thanks!

1 - if the shader has a detailUVMultiplier parameter, try setting it to 0 or 1
2 - tyres.ini - WIDTH=

 

[JV82]

Thanks, I know for the real advertising. My question was related to graphics quality, AI, etc ...
I have to "complete" the USA racing circuits.

 

[lorelord]

1 - if the shader has a detailUVMultiplier parameter, try setting it to 0 or 1
2 - tyres.ini - WIDTH=

1. it doesnt, nothing looks weird with the mapping either

2. sorry didnt explain myself correct, is there a way to move the width, itself?

like below for example, the width itself is ok but the placement is off, does it even matter?

 

[alexlockout]

1. it doesnt, nothing looks weird with the mapping either

2. sorry didnt explain myself correct, is there a way to move the width, itself?

like below for example, the width itself is ok but the placement is off, does it even matter?

I don't know if I understood you correctly.
suspensions.ini - TRACK=
this is the track width, you can move and push the wheels along the track width.

 

[__EASY__]

ACTK Ferrari Enzo v1.1
Assettodrive / A. Showmebest / ACTK
Fix colliders.ini
Fix collider.kn5
Fix tyres.ini
Fix F6 cameras
Add LOD
Add wipers
Add AO skins
http://www.assetto-fr.tk/AC-Forum/viewtopic.php?f=29&t=1416

 

[ZombieBoy1978]

Thanks, I know for the real advertising. My question was related to graphics quality, AI, etc ...
I have to "complete" the USA racing circuits.

Yep, they're the best. I remember a few people having issues with the AI at Barber with certain cars, but I think there are replacement AI files out there somewhere (I remember replacing it on my version).

 

[Kran]

@__EASY__ download is OK, I disabled uBlock and then the Captcha window appeared. Never had to in Sharemods though...

Just a reminder! When using an account, there are no such problems.
I am not saying that you do not have it, and in general, there may be a problem in something else.

 

[AlexMail]

Can someone convert this skin from Scam Dream M4 GT3 to the URD one?
I would love it!

 

[UolterUait]

Delete

 

[Amby]

UPDATE: PureLIFE PPFilter-Pack for PURE 1.0

Version 1.0: (01/20/2022)
• optimized Overcast and Nighttime
• several small fixes
• NEW: added "PURELife_AE" Filter with auto exposure. Make it a bit more "fancy" without losing the realistic look. (TEST IT!)

PureLIFE PPFilter-Pack for Assetto Corsa

Hey mates. This is my first PPFILTER-Pack and it was originally created for Peter Boese's weather simulation Pure. If you want to get access to the Pure Development Preview (and you should), you can get it here on Patreon and support Peter for...

www.racedepartment.com

 

[AlexMail]

Urd m4 was supposed to get an update to the 3d model to fix the inaccurate shape, when that drops every skin made would need to be redone

Did they say when they will release the change?

I actually like a little more the ScamDream model, because it's more smooth and seems better scaled.
Am i wrong?

 

[Bagliokki]

ACTK Ferrari Enzo v1.1
Assettodrive / A. Showmebest / ACTK
Fix colliders.ini
Fix collider.kn5
Fix tyres.ini
Fix F6 cameras
Add LOD
Add wipers
Add AO skins
http://www.assetto-fr.tk/AC-Forum/viewtopic.php?f=29&t=1416

i love your work for this car,can u do the same for the mc12 and the mc12 versione corse?

 

[Real Toonces]

Has anybody tried the 720 GT3X? Is it any good?

Very good. Maybe too good. It's like 5 sec/lap quicker than the non-X at Spa. But still very well balanced.

 

[Paulo Ribeiro]

Hi, paid mod ? if not do you have a link ? thx

You are lucky because Santa Claus is in Italy tuning his vehicle at Pininfarina.😋