Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter Thread starter daan
  • 157,290 comments
  • 51,164,263 views
racinjoe013
Anyone here understand Grid adjustments?

I have a GTE preset that I added the recently released 2018 Ferrari GTE Evo mod. It smokes the other GTE cars in the grid by a wide margin. In watching the race replay, it seems to be excessively fast on the straights. So what is the better tweak to use, adding Ballast or Restrictor? And how do the values work exactly? For example, if I make the Restrictor value 10, would that mean i'm adding 10% restrictor?
Click to expand...
Not to shill out my own thread on the matter but I had a similar issue. Long story short, I haven't figured out any mathematical way to do it but just trial and error and guesswork. But I am by no means any good at this stuff

I haven't touched the BoP of this particular grid in a long time, but just so you have a starting point

www.gtplanet.net

How do you figure out BoP with car classes?

I have a whole ton of GT3 cars and I'm at a loss on how to get the BoP figured out besides playing the guessing game with Ballast Currently, I have 2 of each car selected, strength at 100%, aggression ~77% doing a quali session on Barcelona Moto for 15 min. I'd like to get the cars to within...
www.gtplanet.net www.gtplanet.net
 
Does someone have liveries for this Caparo T1? All liveries available are in solid colors.
I like this car, it's like a LMP + F1...
And I really don't know how to make a skin. Sorry.



Steering fix:

data > car.ini

[CONTROLS]

FFMULT=2.0

STEER_ASSIST=0.50

STEER_LOCK=260

STEER_RATIO=12

LINEAR_STEER_ROD_RATIO=0.0024
 
Last edited:
How can you improve the start of a car? I have no clutch and some cars start very slow until they rev up, I tried to improve the power at low revs or put a short first gear, but sometimes this is not enough, thanks
 
Nuck Chorris
Does someone have liveries for this Caparo T1? All liveries available are in solid colors...
Click to expand...
I have this one with combined colors...

Screenshot_caparo_t1_jandrovi_ks_barcelona_6-3-123-19-5-16.jpg


... but I think was included with the original mod; I don't remember... and I suspect that you are looking for something more racing, with logos and such, something more of this type...

pegatinas_coche_ET_1638288786.jpg


... more or less?😝
 
Last edited:
Nuck Chorris
Does someone have liveries for this Caparo T1? All liveries available are in solid colors.
I like this car, it's like a LMP + F1...
And I really don't know how to make a skin. Sorry.



Steering fix:

data > car.ini

[CONTROLS]

FFMULT=2.0

STEER_ASSIST=0.50

STEER_LOCK=260

STEER_RATIO=12

LINEAR_STEER_ROD_RATIO=0.0024
Click to expand...

that model was converted from Grid I believe and comes with all the included skins of which none were race liveries. ive never seen any available either. the car could benefit from updating tbh
 
Last edited:
Raphael87
How can you improve the start of a car? I have no clutch and some cars start very slow until they rev up, I tried to improve the power at low revs or put a short first gear, but sometimes this is not enough, thanks
Click to expand...
Couldn't you just assign a button on your wheel to a clutch? I know it's a bit unsophisticated but it'll do the job 👍
 
Alguecool
+1 to that, sometimes it's hard to understand what does what. One time I tried to balance a 90s Clio (1000kg, 200hp) with a 90s Twingo (800kg, 150hp), ended up adding 400 ballast and 100 restrictor to the Clio and it was still beating the other one. Another time, 2 cars with 300hp difference between them, just 20 of restrictor and the higher powered one suddenly became a slug... That's why I prefer using car Tuner, or the car's data files directly. I just don't "get" the balancing tools ^^

Edit : For what I know, because the ballast make the car heavier it affects especially the braking and the handling (but a bit everything else too), when a restrictor affects primarly power, so acceleration and top speed. But don't call me an expert at those things, I struggle parking my own car...
Click to expand...

MikeontheMic
Not to shill out my own thread on the matter but I had a similar issue. Long story short, I haven't figured out any mathematical way to do it but just trial and error and guesswork. But I am by no means any good at this stuff

I haven't touched the BoP of this particular grid in a long time, but just so you have a starting point

www.gtplanet.net

How do you figure out BoP with car classes?

I have a whole ton of GT3 cars and I'm at a loss on how to get the BoP figured out besides playing the guessing game with Ballast Currently, I have 2 of each car selected, strength at 100%, aggression ~77% doing a quali session on Barcelona Moto for 15 min. I'd like to get the cars to within...
www.gtplanet.net www.gtplanet.net
Click to expand...
Thanks for the responses. For a first attempt, I tried the power.lut thing described in that thread and it seems to have helped, at least when the ai is driving the car. I'll be interested to see how it effects my speeds. I know that thread talks about raising the lut values, but I had to go the opposite direction to get the Ferrari speeds to match the other cars. I had to lower each value in the power.lut file by 12% to get them to be on equal terms with the other cars. That tells you just how fast they used to be compared to the other cars.

If this works, it's much easier to do it this way than to mess with ballast and restrictor numbers for a grid.
 
carTOON
... As a token of my gratitude, I made the brother's W196 Streamliner conversion... thanks, cheers for all!...​
Click to expand...
Thanks to you for share!

Although it lacks in graphics aspects (this car is so sexy that deserves a LTC), is fun to drive, and the Maserati sound used is gorgeous... but it seems that something has been misplaced with the skins... The only one that have the number badge (12) is the Moss's one. The other skins (and the previews) are all the same.

I wish I could fix these little things, but unfortunately, I would have no idea even where to start.
 
Last edited:
Perico Lospa
Thanks to you for share!

Although it lacks in graphics aspects (this car is so sexy that deserves a LTC), is fun to drive, and the Maserati sound used is gorgeous... but it seems that something has been misplaced with the skins... The only one that have the number badge (12) is the Moss's one. The other skins (and the previews) are all similars.

I wish I could fix these little things, but unfortunately, I would have no idea even where to start.
Click to expand...
Oh man, that's a TOCA Race Driver car... when was that? I did the conversion today, 1 day, quickly, use Photoshop to create a skin... 2006

 
Last edited:
carTOON
Oh man, that's a TOCA Race Driver car... when was that? I did the conversion today, 1 day, quickly, use Photoshop to create a skin... 2006...
Click to expand...
Sorry if I came across as picky or overly critical; was not my intention.

More than anything, my comment was about the issue of the skins; when I saw that two cars appeared in the YouTube video with the numbers correctly placed, I thought that you had misled a file, just that...

Sorry again.
 
Perico Lospa
Sorry if I came across as picky or overly critical; was not my intention.

More than anything, my comment was about the issue of the skins; when I saw that two cars appeared in the YouTube video with the numbers correctly placed, I thought that you had misled a file, just that...

Sorry again.
Click to expand...
It's ok mate, full okay, no problem... just I did this quickly and didn't make separate skins. Otherwise, only the numbers are different, these cars were no different, no complicated skins. That's why I recommended Photoshop, it's easy to change the number and save.
 
Im in love with the Snx Jt5 2021 by Urd, at a first try at Australia f1 22 i said, oh, what a pitty its a little slower than the supra of junshen wu, because that one reaches 300kmh there and the Snx around 280kmh but testing it in Okayama in hotlap mode and in races its spectacular, we hope URD do more Super Gt in the succesive, the nissan Z super Gt 500 and the new civic super gt 500 next year, that would be really really awesome, by the way , a pair of modern v8 australian super cars with the quality of urd would be astonishing too, im a big fan of moyoda hypercar and michigan, and now of the awe super gt pack, ****, this is real quality
 
anyone know how to prevent dust & dirt from being rendered inside the car?
Is there an (easy) way to do it?
It brakes immersion bigtime for me and i'd love to enjoy that beautifull Eiger Nordwand K Trail ...
(not an issue of the track rather the cars I think ... I also see this in other tracks with dirt roads, and I believe i've never encountered a car that does not show the dust & dirt inside the car - unfortunately)
So little hope but still , maybe someone here knows the trick?

EDIT : to be clear , I'm talking about VR rendering (don't think w tripples you can see the area where your feet are and the doorpanels aside them... it's there that the dust and sand being thrown from the wheels gets rendered inside the car as well).
 
Last edited:
jac0
anyone know how to prevent dust & dirt from being rendered inside the car?
Is there an (easy) way to do it?
It brakes immersion bigtime for me and i'd love to enjoy that beautifull Eiger Nordwand K Trail ...
(not an issue of the track rather the cars I think ... I also see this in other tracks with dirt roads, and I believe i've never encountered a car that does not show the dust & dirt inside the car - unfortunately)
So little hope but still , maybe someone here knows the trick?
Click to expand...
Is that in VR ? Asking because I have driven 4 different cars so far and I don't see that (triples here).
 
quick question....say I have a car that I am trying to BOP slower. I am wanting to turn the power down about 7%. How could I do that in the data? would I just reduce the Power.lut by 7% down the list of numbers? any help would be greatly appreciated.
 

Attachments

  • 20230406224736_1.jpg
    20230406224736_1.jpg
    113.3 KB · Views: 39
Perico Lospa
I have this one with combined colors...

View attachment 1245735

... but I think was included with the original mod; I don't remember... and I suspect that you are looking for something more racing, with logos and such, something more of this type...

View attachment 1245737

... more or less?😝
Click to expand...
I'm looking for racing liveries. I really don't know how to make skins.

lorelord
that model was converted from Grid I believe and comes with all the included skins of which none were race liveries. ive never seen any available either. the car could benefit from updating tbh
Click to expand...
I love the car, a mix of F1 + LMP... I'll try to make Monza 1000km. I'm looking for the racing liveries... I'll try a tutorial for make it.
Thank you!
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Similar threads

Vintagedriver
Small writing on AC security
Replies
2
Views
2K
Vintagedriver
Vintagedriver
Terronium-12
Assetto Corsa EVO PC Optimization Guide: The Best Graphics Settings
Replies
5
Views
5K
kpcart
kpcart
Famine
Assetto Corsa EVO Early Access Discussion Thread
43 44 45
Replies
1K
Views
290K
Beezer215
Beezer215
Famine
Assetto Corsa Rally Revealed, Heads to Steam Early Access on November 13
7 8 9
Replies
252
Views
48K
Apocalypse211
Apocalypse211
Terronium-12
Assetto Corsa EVO Update 0.3 Now Available in “Open” Beta Test Branch
2
Replies
33
Views
21K
Cote Dazur
Cote Dazur
Back